Searched for: +
(1 - 20 of 93)

Pages

document
Ville, Alicia (author), Hunfeld, Nicole (author), Bakker, C.A. (author), Sené, Baptiste (author), Diehl, J.C. (author)
This project aims to reduce the environmental impact of the Intensive Care Unit (ICU) of the Erasmus Medical Center (EMC). Systemic design research was executed to map the current waste flow created by the ICU. Literature review, interviews and observations were performed to gather information about the healthcare protocols, hospital procurement...
conference paper 2024
document
Bakker, S. (author), Knödler, L. (author), Spahn, M. (author), Böhmer, J.W. (author), Alonso-Mora, J. (author)
In this paper, we address the problem of real-time motion planning for multiple robotic manipulators that operate in close proximity. We build upon the concept of dynamic fabrics and extend them to multi-robot systems, referred to as Multi-Robot Dynamic Fabrics (MRDF). This geometric method enables a very high planning frequency for high...
conference paper 2024
document
Houtzager, Daan (author), Hofland, Bas (author), Caldera, Ganga (author), van der Lem, Cock (author), van Gent, M.R.A. (author), Bakker, Pieter (author), Antonini, A. (author)
Randomly placed breakwater armour units under wave loading can sometimes start rocking, which can lead to breakage of armour units. This failure mechanism can especially become important for single layer randomly placed armour units for which full displacement of units will only happen at higher stability numbers compared to older types of units...
conference paper 2023
document
Hoveling, T. (author), Faludi, Jeremy (author), Bakker, C.A. (author)
conference paper 2023
document
Bakker, A.M.R. (author), van Baaren, E.S. (author), Hamerslag, E.J.F. (author), Bodelier, C.J.J. (author)
Next decades, many hydraulic structures in the Netherlands will reach their end of life. Timely mitigation requires accurate estimates of the end of life. This appears however hard since many external drivers and multiple functions may lead in many plausible combinations to insufficient technical or functional performance. As a consequence, a...
conference paper 2023
document
Hamerslag, E.J.F. (author), Bakker, A.M.R. (author)
In the coming decades, the storm surge barriers in the Netherlands will reach their end of the designed life time of 100 years. Therefore, the Dutch storm surge barriers are preparing for major renovations. Next to this, as a result of the expected sea level rise, the hydraulic loads and the number of necessary closures will exceed the original...
conference paper 2023
document
Van Gijzen, L. (author), Bakker, A.M.R. (author)
The pumping-weir complex at IJmuiden plays an important role in the drainage of excess water in the Western Netherlands. Multiple pumps need replacing as 4 out of 6 pumps near their end-of-life term. The optimal replacement strategy critically hinges on the future required pumping capacity. Yet, currently available models are not suited to...
conference paper 2023
document
Bakker, A.M.R. (author), Busnach, Tycho (author), Mooyaart, L.F. (author), Van Gijzen, L. (author)
The efficacy of risk models and risk analyses critically hinges on sufficient model evaluation. Nevertheless, the usefulness for the intended purpose is rarely systematically assessed. Poor or even lacking model evaluation of the applied risk models and analyses also troubles the asset management of storm surge barriers in the Netherlands. In...
conference paper 2023
document
Mooyaart, L.F. (author), Bakker, A.M.R. (author), van den Bogaard, J.A. (author), Jonkman, Sebastiaan N. (author)
Coastal defenses must be upgraded to combat increasing flood risk due to climate change and other factors. Storm surge barriers, large movable hydraulic structures that close temporarily during storm surges to prevent coastal floods, play a vital role in protecting estuaries. Due to the complexity of their risk analyses, important improvements...
conference paper 2023
document
Bakker, N.J. (author), Matas, Joaquin Coll (author), Bosman, J.G. (author), Barreau, Nicolas (author), Weeber, A.W. (author), Theelen, M.J. (author)
Partial shading of CIGS modules can lead to permanent damage of the module in the shaded area. This is caused by harmful reverse bias voltages in the shaded area which lead to reverse bias induced defects, also known as wormlike defects. A lot is already known about the origin and propagation of wormlike defects. However, the fundamental...
conference paper 2022
document
Browne, J.T. (author), Bakker, Saskia (author), Yu, Bin (author), Lloyd, P.A. (author), Ben Allouch, Somaya (author)
From diagnosis to patient scheduling, AI is increasingly being considered across different clinical applications. Despite increasingly powerful clinical AI, uptake into actual clinical workflows remains limited. One of the major challenges is developing appropriate trust with clinicians. In this paper, we investigate trust in clinical AI in a...
conference paper 2022
document
Bos, P. (author), Bakker, C.A. (author), Balkenende, R. (author), Sprecher, B. (author)
This design review evaluates the use of bio-based plastics in durable consumer products. The main question is: how does the use of bio-based plastics influence the product’s design, functionality, marketing & communication, and sustainability? Although higher material prices would lead one to expect that higher value applications would be...
conference paper 2022
document
Ranjha, Sayra (author), Hoveling, V.T. (author), van Gelderen, B.E. (author), van de Bult, F.J. (author), den Ouden-van der Horst, D. (author), Smet, C.O. (author), Roelvink, M.A.T. (author), Bakker, I.P. (author)
We present our short series of interactive animations on directional derivatives and level curves. This visualisation was developed for students of first-year mathematics courses at the Delft University of Technology. The interactive animation is an animated video that can be interacted with while it is paused or playing. The user can change,...
conference paper 2021
document
van Dijkhuizen, M.J. (author), Vrijhoef, R. (author), Bakker, H.L.M. (author)
Despite the efforts of governments and firms, the construction industry is trailing other industries in labour productivity. Construction companies are interested in increasing their labour productivity, particularly when demand grows and construction firms cope with labour shortages. Off-site construction has proved to be a favourable policy...
conference paper 2021
document
Ökmen, Ö. (author), Bosch-Rekveldt, M.G.C. (author), Bakker, H.L.M. (author)
Scheduling of a construction project using an activity network can be done using the Critical Path Method (CPM). CPM scheduling, since it was first developed in the USA in 1950’s, has been widely applied in various sectors including the construction sector. CPM, however, is incapable of reflecting the influence of uncertainty on schedules and...
conference paper 2021
document
Jalali Sohi, A. (author), Rikhtegarnezami, M. (author), Bakker, H.L.M. (author), Hertogh, M.J.C.M. (author)
Societal challenges such as climate change and inefficiency of energysystems more and more crave for a sustainable environment. Research proved thatrestructuring energy systems into more sustainable forms, called “Energy Transition”, has faced challenges. How to deal with these challenges requires the cocreation between various actors with...
conference paper 2021
document
Ökmen, Ö. (author), Bosch-Rekveldt, M.G.C. (author), Bakker, H.L.M. (author)
Scheduling of a construction project can be done by using the Critical Path Method (CPM) in case the project is composed of interrelated activities that can be combined through a network. Given uncertainties nowadays and the related need for project schedule adaptations, the question is raised whether and how “traditional” CPM based schedules...
conference paper 2020
document
van Dam, S.S. (author), Bakker, C.A. (author), Hoogeveen, L.A.J. (author)
This paper presents the results of two co-creation sessions with stakeholders in the automotive aftermarket. The sessions were instigated as part of the EU project ReCiPSS to develop a new service to simplify the reverse logistics of automotive cores purposed for remanufacturing. Remanufacturing car parts is a longstanding practice within the...
conference paper 2020
document
Flipsen, Bas (author), Bakker, C.A. (author), de Pauw, I.C. (author)
Designing products for the Circular Economy requires closing and slowing of loops by means of repair, reman-ufacturing, refurbishment, parts reuse and/or recycling. Ease of product disassembly facilitates these processes to be more cost-effective, resulting in a better circular strategy fit. In this paper we present the Hotspot Map-ping method....
conference paper 2020
document
Diehl, J.C. (author), van Doesum, F. (author), Bakker, M.F. (author), van Gijzen, M.B. (author), O’Reilly, Thomas (author), Muhumuza, Ivan (author), Obungoloch, Johnes (author), Kabachelor, Edith Mbabazi (author)
Compared to other parts of the world, the incidence of hydrocephalus in children is very high in sub- Saharan Africa. Magnetic resonance imaging (MRI) would be the preferred diagnostic method for infant hydrocephaleus. However, in practice, MRI is seldom used in sub-Saharan Africa due to its high prize, low mobility, and...
conference paper 2020
Searched for: +
(1 - 20 of 93)

Pages