Searched for:
(1 - 20 of 44)

Pages

document
Zhang, H. (author), Liu, Y. (author), Wang, Lingen (author), Sun, Fenglian (author), Fan, Xuejun (author), Zhang, G.Q. (author)
The nanoindentation test was conducted in this paper to investigate the indentation hardness, plasticity and initial creep properties of pressure sintered nanosilver joint at various test temperatures. The effects of strain rate on the indentation hardness were first investigated. Then yield stress of nanosilver sintered joint was studied in...
journal article 2019
document
Liu, Y. (author), Zhang, H. (author), Wang, Lingen (author), Fan, Xuejun (author), Zhang, G.Q. (author), Sun, Fenglian (author)
Purpose: Crack and stress distribution on dies are key issues for the pressure-assisted sintering bonding of power modules. The purpose of this research is to build a relationship among stress distributions, sintering sequences and sintering pressures during the sintering processes. Design/methodology/approach: Three sintering sequences, S(a)...
journal article 2019
document
Zhang, Chi (author), Tang, Qiuhong (author), Chen, Deliang (author), van der Ent, R.J. (author), Liu, Xingcai (author), Li, Wenhong (author), Haile, Gebremedhin Gebremeskel (author)
Precipitation on the Tibetan Plateau (TP) showed different spatial changes during 1979-2016, with an increasing trend over the northern Tibetan Plateau (NTP) and a slightly negative trend over the southern Tibetan Plateau (STP). The changes in precipitation moisture sources over the NTP and STP are investigated using the improved Water...
journal article 2019
document
Apostolidis, P. (author), Liu, X. (author), Zhang, M (author), van de Ven, Martin (author), Erkens, Sandra (author), Scarpas, Athanasios (author)
The addition of epoxy modifier in bitumen is a relatively new modification technology (1-4) and the most critical epoxy polymerization-induced changes of the epoxy-bituminous materials are not fully understood. Different phenomena take place when epoxy modifiers are incorporated into bitumen and they are dependent on the material hardening...
conference paper 2019
document
Zhang, H. (author), Liu, Y. (author), Wang, Lingen (author), Sun, Fenglian (author), Fan, Jiajie (author), Placette, Mark D. (author), Fan, Xuejun (author), Zhang, G.Q. (author)
Modern power electronics has the increased demands in current density and high-temperature reliability. However, these performance factors are limited due to the die attach materials used to affix power dies microchips to electric circuitry. Although several die attach materials and methods exist, nanosilver sintering technology has received...
journal article 2019
document
Zhang, Zhixia (author), Zhang, Long (author), Yan, Xinlin (author), Wang, Hongqiang (author), Liu, Yanyan (author), Yu, C. (author), Cao, Xiaoting (author), van Eijck, L. (author), Wen, Bin (author)
Br as solid electrolyte synthesized by a facile solid-state sintering. Different from other O-incorporated sulfides,...
journal article 2019
document
Wu, Dequan (author), Zhang, D. (author), Ye, Yuwei (author), Ma, Lingwei (author), Minhas, Badar (author), Liu, Bei (author), Terryn, H.A. (author), Mol, J.M.C. (author), Li, Xiaogang (author)
Recently, lubricant-infused surfaces (LIS) have emerged as a prominent class of surface technology for antifouling, anti-icing and anticorrosion applications. However, long-term corrosion exposure and mechanical damages may deteriorate the practical performance of LIS during application. In this study, a robust LIS was fabricated by the...
journal article 2019
document
Zhang, Chunyan (author), Liu, B. (author), Yu, Baoxing (author), Lu, Xiaopeng (author), Wei, Yong (author), Zhang, Tao (author), Mol, J.M.C. (author), Wang, Fuhui (author)
Surface pretreatment is generally applied before application of protective coatings on Mg alloys, which influences surface microstructure and electrochemical activity of the substrate and has an effect on the coating properties. The effect of various pretreatment processes (sand-blasting, grinding and polishing) on the microstructure and...
journal article 2019
document
Zhang, Youyou (author), Mosallam, Ayman (author), Liu, Yuqing (author), Sun, Yun (author), Xin, H. (author), He, Jun (author)
In this study, flexural behaviors of the pultruded composite laminate were evaluated through experiments and theoretical analysis. Three-point flexural tests were performed for pultruded specimens. The typical failure mode for the longitudinal flexural specimens was local crush on the top surface accompanied with local cracks on the bottom...
journal article 2019
document
Liu, Q. (author), Zhao, M. (author), Mytnyk, S. (author), Klemm, B. (author), Zhang, K. (author), Wang, Y. (author), Yan, Dadong (author), Mendes, E. (author), van Esch, J.H. (author)
Hydrogel microparticles are important in materials engineering, but their applications remain limited owing to the difficulties associated with their manipulation. Herein, we report the self-orientation of crescent-shaped hydrogel microparticles and elucidate its mechanism. Additionally, the microparticles were used, for the first time, as...
journal article 2019
document
Zhang, Y. (author), Luo, Liang (author), Ge, Jin (author), Yan, Su Qiong (author), Peng, Yan Xin (author), Liu, Ya Ru (author), Liu, Jin Xiang (author), Liu, C. (author), Ma, Tianqiong (author), More Authors (author)
An "on water" organocatalytic cyanoarylmethylation of aryl acetonitrile to isatins is developed, giving products in high yields and up to excellent diastereoselectivities. A remarkable enhancement of reaction rates and diastereoselectivities by water was observed under mild conditions. Moreover, this approach provides a highly efficient and...
journal article 2019
document
Zhang, Zhixia (author), Zhang, Long (author), Liu, Yanyan (author), Yu, C. (author), Yan, Xinlin (author), Wang, L. (author)
S....
journal article 2018
document
Zhang, H. (author), Liu, Chun Xiao (author), Gazibegovic, S. (author), Xu, D. (author), Logan, John A. (author), Wang, G. (author), Bommer, J.D.S. (author), de Moor, M.W.A. (author), Car, D. (author), op het Veld, R.L.M. (author), Van Veldhoven, Petrus J. (author), Kölling, S. (author), Verheijen, M.P.A.M. (author), Pendharkar, Mihir (author), Pennachio, Daniel J. (author), Shojaei, Borzoyeh (author), Lee, Joon Sue (author), Palmstrøm, Chris J. (author), Bakkers, E.P.A.M. (author), Sarma, S. Das (author), Kouwenhoven, Leo P. (author)
Majorana zero-modes - a type of localized quasiparticle - hold great promise for topological quantum computing. Tunnelling spectroscopy in electrical transport is the primary tool for identifying the presence of Majorana zero-modes, for instance as a zero-bias peak in differential conductance. The height of the Majorana zero-bias peak is...
journal article 2018
document
Wu, Jibing (author), Yu, Lianfei (author), Zhang, Qun (author), Shi, P. (author), Liu, Lihua (author), Deng, Su (author), Huang, Hongbin (author)
The heterogeneous information networks are omnipresent in real-world applications, which consist of multiple types of objects with various rich semantic meaningful links among them. Community discovery is an effective method to extract the hidden structures in networks. Usually, heterogeneous information networks are time-evolving, whose objects...
journal article 2018
document
Yang, Ning (author), Yang, Daoguo (author), Zhang, G.Q. (author), Chen, Liangbiao (author), Liu, Dongjing (author), Cai, Miao (author), Fan, Xuejun (author)
The effects of graphene stacking are investigated by comparing the results of methane adsorption energy, electronic performance, and the doping feasibility of five dopants (i.e., B, N, Al, Si, and P) via first-principles theory. Both zigzag and armchair graphenes are considered. It is found that the zigzag graphene with Bernal stacking has...
journal article 2018
document
Zhang, Zhaoshuai (author), Zhang, Long (author), Liu, Yanyan (author), Wang, Hongqiang (author), Yu, C. (author), Zeng, Hong (author), Wang, L. (author), Xu, B. (author)
High grain-boundary resistance, Li-dendrite formation, and electrode/Li interfacial resistance are three major issues facing garnet-based solid electrolytes. Herein, interfacial architecture engineering by incorporating 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl) imide (BMP-TFSI) ionic liquid into a garnet oxide is proposed....
journal article 2018
document
Li, Shengli (author), Liu, Y. (author), Zhang, H. (author), Cai, Hongming (author), Sun, Fenglian (author), Zhang, G.Q. (author)
5 journal article 2018
document
Liu, Yanyan (author), Zhang, Long (author), Wang, Hongqiang (author), Yu, C. (author), Yan, Xinlin (author), Liu, Qiunan (author), Xu, Bo (author), Wang, Li Min (author)
nanosheets with a flower-like morphology prepared with PEG400 as additive, which acts not only as surfactant but importantly, also as reactant. Notably, in the absence...
journal article 2018
document
Lu, Hongzhong (author), Cao, Weiqiang (author), Liu, X. (author), Sui, Yufei (author), Ouyang, Liming (author), Xia, Jianye (author), Huang, Mingzhi (author), Zhuang, Yingping (author), Zhang, Siliang (author), Noorman, H.J. (author), Chu, Ju (author)
Oxygen limitation is regarded as a useful strategy to improve enzyme production by mycelial fungus like Aspergillus niger. However, the intracellular metabolic response of A. niger to oxygen limitation is still obscure. To address this, the metabolism of A. niger was studied using multi-omics integrated analysis based on the latest GEMs ...
journal article 2018
document
Zhang, Xiang Yu (author), Fang, Gang (author), Xing, Lei Lei (author), Liu, Wei (author), Zhou, J. (author)
Functionally graded scaffold (FGS) is designed to mimic the morphology, mechanical and biological properties of natural bone closely. Porosity variation strategy between different regions in FGS plays a crucial role in influencing its mechanical and biological performance. A combination of modeling tool and scripting language can effectively...
journal article 2018
Searched for:
(1 - 20 of 44)

Pages