- document
-
van Oostrum, Matthijs (author), Liu, Jiayao (author), Li, Yishiqin (author), Hoek, Ruben (author), Yang, Yidong (author), He, Zhujun (author), Buysschaert, Axel (author), Xiao, Yazhi (author), Peng, Jiping (author), van Eijk, Saskia (author), Yang, Qiao (author)This publication is in response to the call of 2017 Bi-City Biennale of Urbanism\Architecture (Shenzhen) (UABB) “Cities, Grow in Difference”, from the perspective of urbanism: the synthesis of factors that collectively determine the spatial use of the city. <br/>This atlas is based on master graduation theses of Delft University of Technology ...book 2017
- document
-
Liu, X. (author), Tzimiris, G. (author), Li, J. (author), Scarpas, T. (author), Hofman, R. (author), Voskuilen, J. (author)In order to adequately characterize the fatigue response of the various membranes with surrounding multilayer surfacing layers on orthotropic steel decks and collect the necessary parameters for FE modeling, the details of the cyclic Membrane Adhesion Tester (MAT) are introduced. The fatigue damage in membrane interface is related to the amount...conference paper 2015
- document
-
The drag reduction effect of a semi-circular riblet-structured surface in a turbulent boundary layer is experimentally investigated using the micro-pillar shear stress sensor MPS3. The MPS3 sensor is a novel tool for the quantitative measurement of the wall-shear stress distribution and possesses a high spatial and temporal resolution. The...conference paper 2015
- document
-
Tzimiris, G. (author), Liu, X. (author), Scarpas, A. (author), Li, J. (author), Hofman, R. (author), Voskuilen, J. (author)Due to lightweight and flexibility, orthotropic steel deck bridges become popular the last decades but several problems were reported in relation to asphalt surfacing materials such as rutting, cracking, loss of bond between the surfacing system and steel deck. In the Netherlands a surfacing structure for orthotropic steel bridge decks mostly...conference paper 2013
- document
- Li, K. (author), Liu, W. (author), Markine, V.L. (author), Ma, L. (author) conference paper 2012
- document
-
Li, J. (author), Liu, X. (author), Scarpas, A. (author), Tzimiris, G. (author)Light weight orthotropic steel bridge decks have been widely utilized for bridges in seismic zones, movable bridges and long span bridges. In the last three decades, severe problems were reported in relation to asphaltic surfacing materials on orthotropic steel deck bridges. Earlier investigations have shown that the bonding strength of membrane...conference paper 2013
- document
-
Liu, X. (author), Scarpas, A. (author), Li, J. (author), Tzimiris, G. (author), Hofman, R. (author), Voskuilen, J. (author)In order to adequately characterize the adhesive bonding strength of the various membranes with surrounding materials on orthotropic steel decks and collect the necessary parameters for FE modeling, details of the Membrane Adhesion Test (MAT) are introduced. Analytical constitutive relations of the MAT device have been derived using the same...conference paper 2013
- document
-
Liu, X. (author), Scarpas, A. (author), Li, J. (author), Tzimiris, G. (author)In order to characterize adequately the adhesive bonding strength of the various membranes with surrounding materials on orthotropic steel decks and collect the necessary parameters for FE modeling, details of the Membrane Adhesion Test (MAT) have been introduced. Analytical constitutive relations of MAT device have been derived on the basis of...conference paper 2012
- document
-
Zhang, Jiyi (author), Li, Gang (author), Liu, Youzhi (author), Yin, Pengcheng (author), Yu, Jinyu (author), Shi, Zhifeng (author)Since the introduction of the concept of 3D cadastre, a great many of significant research results have been done. To promote the development of 3D cadatre, 3D cadastre working group sponsored by International Federation Surveyors (FIG) commissions 3 and 7 was organized by Delft University of Technology in 2001. This working group provides a...conference paper 2018
- document
- Li, Jinxuan (author), Liu, Shuxue (author), Zhao, Min (author), Teng, Bin (author) conference paper 2013
- document
-
Menenti, M. (author), Li, X. (author), Wang, J. (author), Vereecken, H. (author), Li, J. (author), Mancini, M. (author), Liu, Q. (author), Jia, L. (author), Li, J. (author), Kuenzer, C. (author), Huang, S. (author), Yesou, H. (author), Wen, J. (author), Kerr, Y. (author), Cheng, X. (author), Gourmelen, N. (author), Ke, C. (author), Ludwig, R. (author), Lin, H. (author), Eineder, M. (author), Ma, Y. (author), Su, Z.B. (author)Ten Dragon 3 projects deal with hydrologic and cryosphere processes, with a focus on the Himalayas and Qinghai – Tibet Plateau, but not limited to that. At the 1st Dragon 3 Progress Symposium in 2013 a significant potential for a better and deeper integration appeared very clearly and we worked out an overview of the ten projects identifying...conference paper 2015
- document
-
Li, J. (author), Liu, X. (author), Scarpas, A. (author), Tzimiris, G. (author)In the Netherlands an asphaltic surfacing structure for orthotropic steel bridge decks mostly consists of two structural layers. The upper layer consists of Porous Asphalt (PA) because of reasons related to noise hindrance. For the lower layer a choice between Mastic Asphalt (MA) or Guss Asphalt (GA), can be made. In this paper, a typical Dutch...conference paper 2012
- document
-
Pang, Min (author), Sun, Zhenping (author), Ji, Yanliang (author), Yang, Jingbin (author), Wang, Peiming (author), Xu, Yaling (author), Li, Huanhuan (author), Liu, Jiaying (author), Li, Fei (author)Characteristics of fly ash(FA) blended mortars (50%, 70% and 90%) at different curing ages (28 days and 180 days) under ammonium chloride solution(ACS) leaching were investigated. Mass loss under leaching, initial CaO content, Ca(OH)2 content(CH), content of chemical bonded water, and hydration degree of blended pastes were tested by XRF and DSC...conference paper 2021
- document
-
Zhu, Songfeng (author), Li, Xueyuan (author), Qu, Xinyi (author), Liu, Qi (author), Li, Z. (author)This paper proposes a linear quadratic controller based on particle swarm algorithm for the rear wheel control of four-wheel steering vehicle. Particle swarm optimization with fitness functions is used to optimize the coefficients of the weight matrix offline. The fuzzy rules following the controller is used if the road condition is terrible....conference paper 2022
- document
-
Wu, Yue (author), Liu, Xiuming (author), Li, Q. (author), Chen, Boxuan (author), Luo, Peng (author), Pronk, Arno (author), Mergny, Elke (author)By using inflatable moulds and then spraying cellulose-water mixture, one ice dome and two ice towers were built in Harbin in December 2016. During the whole process, form-finding of the inflatable moulds as well as the construction of these ice composite shell structures are very important for the final results.<br/>The mould for the ice dome...conference paper 2017
- document
-
Hong, H. (author), Ye, Li (author), Li, Ke (author), Sarro, Pasqualina M (author), Zhang, Kouchi (author), Liu, Zewen (author)In this paper, we report a modified three step anisotropic wet etching (TSWE) method to fabricate solid-state silicon nanoslits. The slit-opening process is performed by <111> crystal plane etching. The etching rate of the <111> crystal plane is reasonably slow as it is only 1/45 of the <100> etching rate, thus allowing and...conference paper 2021
- document
-
Liu, Minne (author), Ibrahim, Mesfin S. (author), Wen, Minzhen (author), Li, Sheng (author), Wang, An (author), Zhang, Kouchi (author), Fan, J. (author)Spectral power distribution (SPD) is the radiation power intensity at different wavelengths, containing the most basic photometric and colorimetric performance of the illuminant, which is able to predict the lifetime of LEDs. This paper proposes an SPD model assisted by machine learning algorithms to detect the early failure of white LEDs. The...conference paper 2023
- document
-
Ji, Liangzheng (author), Li, Zaihuan (author), Zhang, Kouchi (author), Zhang, Jing (author), Liu, Pan (author)Micro LED displays offer superior performance compared to traditional LCD and OLED displays. However, challenges in transfer technology, such as high throughput and scalability, must be addressed. Among various mass transfer techniques, stamp transfer and laser-assisted transfer are widely used for Micro LED assembly. The laser-assisted transfer...conference paper 2023
- document
-
Li, Shizhen (author), Liu, X. (author), Jiang, Jing (author), Tan, C. (author), Gao, Chenshan (author), Liu, Yang (author), Ye, H. (author), Zhang, Kouchi (author)Cu-Ag core-shell (CS) nanoparticle (NP) is considered as a cost-effective alternative material to nano silver sintering material in die attachment application. To further reduce the cost, the thickness of the Ag shell can be adjusted. Whereas the shell thickness will also affect the thermal stability of the Cu-Ag CSNPs. In this study, molecular...conference paper 2022
- document
-
Xu, Jingyi (author), Li, Z. (author), Gao, Li (author), Ma, Junyi (author), Liu, Qi (author), Zhao, Yanan (author)The deep reinforcement learning-based energy management strategies (EMS) have become a promising solution for hybrid electric vehicles (HEVs). When driving cycles are changed, the neural network will be retrained, which is a time-consuming and laborious task. A more efficient way of choosing EMS is to combine deep reinforcement learning (DRL)...conference paper 2022