Searched for:
(1 - 20 of 63)

Pages

document
Zhang, H. (author), Liu, Y. (author), Wang, Lingen (author), Sun, Fenglian (author), Fan, Xuejun (author), Zhang, G.Q. (author)
The nanoindentation test was conducted in this paper to investigate the indentation hardness, plasticity and initial creep properties of pressure sintered nanosilver joint at various test temperatures. The effects of strain rate on the indentation hardness were first investigated. Then yield stress of nanosilver sintered joint was studied in...
journal article 2019
document
Chen, Wei (author), Fan, J. (author), Qian, Cheng (author), Pu, Bin (author), Fan, Xuejun (author), Zhang, G.Q. (author)
The inherent luminous characteristics and stability of LED packages during the operation period are highly dependent on their junction temperatures and driving currents. In this paper, the luminous flux of LED packages operated under a wide range of driving currents and junction temperatures are investigated to develop a luminous flux...
journal article 2019
document
Yazdan Mehr, M. (author), Bahrami, A. (author), van Driel, W.D. (author), Fan, Xuejun (author), Davis, J.L. (author), Zhang, G.Q. (author)
In this paper, degradation mechanisms of optical materials, used in the light emitting diode (LED)-based products, are reviewed. The LED lighting is one of the fastest technology shifts in human history. Lighting accounts for almost 20% of the global electrical energy use, inferring that replacement of traditional lighting sources with LEDs...
journal article 2019
document
Saadabadi, S.A. (author), Thallam Thattai, A. (author), Fan, L. (author), Lindeboom, R.E.F. (author), Spanjers, H. (author), Purushothaman Vellayani, P.V. (author)
Anaerobic Digestion (AD) is used worldwide for treating organic waste and wastewater. Biogas produced can be converted using conventional energy conversion devices to provide energy efficient, integrated waste solutions. Typically, the electrical conversion-efficiency of these devices is 30–40% and is lowered due to biogas utilization instead...
review 2019
document
Liu, Y. (author), Zhang, H. (author), Wang, Lingen (author), Fan, Xuejun (author), Zhang, G.Q. (author), Sun, Fenglian (author)
Purpose: Crack and stress distribution on dies are key issues for the pressure-assisted sintering bonding of power modules. The purpose of this research is to build a relationship among stress distributions, sintering sequences and sintering pressures during the sintering processes. Design/methodology/approach: Three sintering sequences, S(a)...
journal article 2019
document
Sun, B. (author), Fan, J. (author), Fan, Xuejun (author), Zhang, G.Q. (author), Zhang, Guohao (author)
In this paper, a physics of failure-based prediction method is combined with statistical models to consider the impact of current crowding and current droop effects on the reliability of LED arrays. Electronic-thermal models of LEDs are utilized to obtain the operation conditions under the influences of current crowding and current droop. A...
journal article 2019
document
Zhang, H. (author), Liu, Y. (author), Wang, Lingen (author), Sun, Fenglian (author), Fan, Jiajie (author), Placette, Mark D. (author), Fan, Xuejun (author), Zhang, G.Q. (author)
Modern power electronics has the increased demands in current density and high-temperature reliability. However, these performance factors are limited due to the die attach materials used to affix power dies microchips to electric circuitry. Although several die attach materials and methods exist, nanosilver sintering technology has received...
journal article 2019
document
Yang, Ning (author), Yang, Daoguo (author), Zhang, G.Q. (author), Chen, Liangbiao (author), Liu, Dongjing (author), Cai, Miao (author), Fan, Xuejun (author)
The effects of graphene stacking are investigated by comparing the results of methane adsorption energy, electronic performance, and the doping feasibility of five dopants (i.e., B, N, Al, Si, and P) via first-principles theory. Both zigzag and armchair graphenes are considered. It is found that the zigzag graphene with Bernal stacking has...
journal article 2018
document
Fan, Songli (author), Ai, Qian (author), Piao, L. (author)
Battery energy storage (BES) and demand response (DR) are considered to be promising technologies to cope with the uncertainty of renewable energy sources (RES) and the load in the microgrid (MG). Considering the distinct prediction accuracies of the RES and load at different timescales, it is essential to incorporate the multi-timescale...
journal article 2018
document
Fan, Songli (author), Li, Zhengshuo (author), Wang, Jianhui (author), Piao, L. (author), Ai, Qian (author)
Under the background of global energy conservation, the energy hub (EH)-based integrated energy system is becoming the transition direction of future energy structure. In this paper, we study the cooperative economic scheduling problem for multiple neighboring integrated energy systems on the basis of EH. Different with the traditional non...
journal article 2018
document
Cui, Z. (author), Chen, Xianping (author), Fan, Xuejun (author), Zhang, G.Q. (author)
Interfacial properties of Cu/SiO2 in semiconductor devices has continued to be the subject of challenging study for many years because of its difficulties in experimentally quantifying the critical strength of interface. In this paper, a multi-scale modeling approach is built to characterize the interfacial properties between Cu and SiO2. In...
conference paper 2018
document
Qian, C. (author), Mirzagheytaghi, Amir (author), Fan, J. (author), Tang, H. (author), Sun, B. (author), Ye, H. (author), Zhang, G.Q. (author)
As an increasing attention towards sustainable development of energy and environment, the power electronics (PEs) are gaining more and more attraction on various energy systems. The insulated gate bipolar transistor (IGBT), as one of the PEs with numerous advantages and potentials for development of higher voltage and current ratings, has been...
journal article 2018
document
Sun, B (author), Fan, Xuejun (author), van Driel, W.D. (author), Cui, C (author), Zhang, G.Q. (author)
In this study, we present a general methodology that combines the reliability theory with physics of failure for reliability prediction of an LED driver. More specifically, an integrated LED lamp, which includes an LED light source with statistical distribution of luminous flux, and a driver with a few critical components, is considered. The...
journal article 2018
document
Sun, B. (author), Fan, J. (author), Fan, Xuejun (author), Zhang, G.Q. (author)
This work studies the effect of randomness of LED's lumen depreciation on reliability of the entire LED lamp. An integrated LED light bulb is selected as carrier of the proposed method. A PoF based lumen depreciation model and electronic-thermal simulations are introduced for reliability prediction. The normal distribution is used to describe...
conference paper 2018
document
Liu, Yang (author), Zhang, H. (author), Wang, Lingen (author), Fan, Xuejun (author), Zhang, G.Q. (author), Sun, Fenglian (author)
The microstructure, thickness, porosity, and shear performance of the silver (Ag) sintering layers under different sintering pressures were investigated. Experimental results demonstrated that the thickness and the porosity of the sintering layer decreased when the sintering pressure varied from 5 MPa to 30 MPa. This densification phenomenon...
journal article 2018
document
Zhang, H. (author), Liu, Yang (author), Wang, Lingen (author), Fan, Jiajie (author), Fan, Xuejun (author), Sun, Fenglian (author), Zhang, G.Q. (author)
High reliable packaging materials are needed for electronics when they work at harsh environments. Among which, the nanosilver material has been widely studied and applied in power electronics due to its low processing temperature and high reliability. This paper investigates the bonding properties of nanosilver sintered hermetic cavity. There...
journal article 2018
document
Monteiro Fernandes, A.B. (author), Brabandt, Joerg (author), Posdziech, Oliver (author), Saadabadi, S.A. (author), Recalde Moreno Del Rocio, M.D.R. (author), Fan, L. (author), Promes, E.J.O. (author), Liu, M. (author), Woudstra, T. (author), Purushothaman Vellayani, P.V. (author)
This paper describes the steps involved in the design, construction, and testing of a gasifier-specific solid oxide fuel cell (SOFC) system. The design choices are based on reported thermodynamic simulation results for the entire gasifier- gas cleanup-SOFC system. The constructed SOFC system is tested and the measured parameters are compared...
journal article 2018
document
Tang, H. (author), Ye, Huai-Yu (author), Chen, Xian Ping (author), Qian, Cheng (author), Fan, Xuejun (author), Zhang, G.Q. (author)
In this paper, the heat transfer performance of the multi-chip (MC) LED module is investigated numerically by using a general analytical solution. The configuration of the module is optimized with genetic algorithm (GA) combined with a response surface methodology. The space between chips, the thickness of the metal core printed circuit board...
journal article 2017
document
Sun, B. (author), Fan, Xuejun (author), Ye, H. (author), Fan, Jiajie (author), Qian, Cheng (author), van Driel, W.D. (author), Zhang, G.Q. (author)
In this paper, an integrated LED lamp with an electrolytic capacitor-free driver is considered to study the coupling effects of both LED and driver's degradations on lamp's lifetime. An electrolytic capacitor-less buck-boost driver is used. The physics of failure (PoF) based electronic thermal simulation is carried out to simulate the lamp's...
journal article 2017
document
Fan, Yi (author)
In this paper I examine the long-term consequences of adversity on consumption and financial behaviour, using the largest forced migration experiment in history. From 1966 to 1978, 17 million urban youths in China, mostly junior or senior high school graduates, were sent to the countryside to do farm work for an average of three to four years...
conference paper 2017
Searched for:
(1 - 20 of 63)

Pages