A conceptual design of two-stream alkali-activated materials

To properly control the reaction kinetics and fresh properties evolution in conventional alkali-activated materials (AAMs), a conceptual design of two-stream AAMs has been proposed in this study. This is achieved by dividing the solid and liquid components in AAMs, including blast furnace slag (BFS) and electric arc furnace slag (EFS)...

Characterization, pre-treatment, and potential applications of fine MSWI bottom ash as a supplementary cementitious material

With the development of waste recovery techniques, previous research has revealed that coarse fractions of municipal solid waste incineration (MSWI) bottom ash (BA) after proper treatment could be applied in the construction sector, while the fines are seldom recovered in practice and normally landfilled. This study explores the potential...

Prediction & optimization of alkali-activated concrete based on the random forest machine learning algorithm

Alkali-activated concrete (AAC) is regarded as a promising alternative construction material to reduce the CO₂ emission induced by Portland cement (PC) concrete. Due to the diversity in raw materials and complexity of reaction mechanisms, a commonly applied design code is still absent to date. This study attempts to directly...

Sintering mechanism of Ag nanoparticle-nanoflake: a molecular dynamics simulation

This paper studied the behaviors of sintering between Ag nanoparticle (NP) and nanoflake (NF) in the same size by molecular dynamics simulation. Before the sintering simulation, the melting simulation of NF was carried out to calculate the melting points of NFs and investigate the thermostability of NF. The Lindemann index and potential...

Rheology of alkali-activated slag pastes: New insight from microstructural investigations by cryo-SEM

This study aims to interpret the early-stage rheology of alkali-activated slag (AAS) paste from microstructure perspectives. The microstructures visualized by cryogenic scanning electron microscopy (cryo-SEM) revealed the essential distinction between hydroxide and silicate-activated slag pastes. The hydroxide-based mixture showed typical...

Potential application of MSWI bottom ash as substitute material in Portland cement concrete: Filler or binder

In recent years, the rapid industrialization and urbanization led to the explosive growth of municipal solid waste incineration (MSWI) bottom ashes (BA) production. However, most of them are directly landfilled, which not only brings environmental burden but also results in loss of potential resources. Present researches have proved that MSWI BA...

Potential application of MSWI bottom ash as substitute material in Portland cement concrete: Filler or binder

In recent years, the rapid industrialization and urbanization led to the explosive growth of municipal solid waste incineration (MSWI) bottom ashes (BA) production. However, most of them are directly landfilled, which not only brings environmental burden but also results in loss of potential resources. Present researches have proved that MSWI BA...

Pre-Treatments Of Mswi Bottom Ash For The Application As Supplementary Cementitious Material In Blended Cement Paste

At present, most municipal solid waste incineration (MSWI) bottom ash, as being disposed of as waste, is directly landfilled, raising concern about the environmental issue and potential loss of resources. Given that the natural raw materials used for cement production are being depleted, the recycling of MSWI bottom ash for the application as...

Thermal Management on IGBT Power Electronic Devices and Modules

As an increasing attention towards sustainable development of energy and environment, the power electronics (PEs) are gaining more and more attraction on various energy systems. The insulated gate bipolar transistor (IGBT), as one of the PEs with numerous advantages and potentials for development of higher voltage and current ratings, has been...

A novel lifetime prediction for integrated LED lamps by electronic-thermal simulation

In this paper, an integrated LED lamp with an electrolytic capacitor-free driver is considered to study the coupling effects of both LED and driver's degradations on lamp's lifetime. An electrolytic capacitor-less buck-boost driver is used. The physics of failure (PoF) based electronic thermal simulation is carried out to simulate the lamp's...

A Reliability Prediction for Integrated LED Lamp with Electrolytic Capacitor-Free Driver

This paper studies the interaction of catastrophic failure of the driver and LED luminous flux decay for an integrated LED lamp with an electrolytic capacitor-free LED driver. Electronic thermal simulations are utilized to obtain the lamp's dynamic history of temperature and current for two distinct operation modes: constant current mode (CCM...