Searched for: +
(1 - 20 of 49)

Pages

document
Tu, H. (author), Pel, A.J. (author), Li, H. (author), Sun, L. (author)
Earlier studies have shown that driving behavior differs strongly in emergency conditions compared with behavior in normal traffic conditions. In this paper, these findings are followed up with an investigation of how these differences in driving behavior affect travel time reliability. In particular, the focus is on the effect of relatively...
journal article 2012
document
Tu, H. (author), Li, H. (author), Van Lint, J.W.C. (author), Knoop, V.L. (author), Sun, L. (author)
Travel time reliability is considered to be one of the key indicators of transport system performance. Knowledge of the mechanisms of travel time unreliability enables the derivation of explanatory models with which travel time reliability can be predicted and utilized in traffic management. Inspired by the macroscopic fundamental diagram (MFD),...
conference paper 2013
document
Li, Hai-Tao (author), Wang, Qi-bin (author), Zong, Zhi (author), Sun, Lei (author), Liang, Hui (author)
journal article 2014
document
Sokolovskij, R. (author), Sun, J. (author), Santagata, F. (author), Iervolino, E. (author), Li, S. (author), Zhang, G.Y. (author), Sarro, Pasqualina M (author), Zhang, Kouchi (author)
A method for highly controllable etching of AlGaN/GaN for the fabrication of high sensitivity HEMT based sensors is developed. The process consists of cyclic oxidation of nitride with O<sub>2</sub> plasma using ICP-RIE etcher followed by wet etching of the oxidized layer. Previously reported cyclic oxidation-based GaN etching obtained very...
journal article 2016
document
Sun, B. (author), Fan, Xuejun (author), Li, Lei (author), Ye, H. (author), van Driel, W.D. (author), Zhang, Kouchi (author)
This paper studies the interaction of catastrophic failure of the driver and LED luminous flux decay for an integrated LED lamp with an electrolytic capacitor-free LED driver. Electronic thermal simulations are utilized to obtain the lamp's dynamic history of temperature and current for two distinct operation modes: constant current mode (CCM...
journal article 2017
document
Liu, Quantao (author), Li, Bin (author), Schlangen, E. (author), Sun, Yihan (author), Wu, Shaopeng (author)
In this paper, steel slag/steel fiber composite asphalt mixture were prepared. The effects of the addition of steel slag and/or steel fibers on the mechanical, thermal, induction heating and healing properties of asphalt mixture were investigated. The results showed that adding steel slag and/or steel fibers improves the water stability,...
journal article 2017
document
Li, Shengli (author), Liu, Y. (author), Zhang, H. (author), Cai, Hongming (author), Sun, Fenglian (author), Zhang, Kouchi (author)
In this study, SAC305 and SAC305-0.3Ni solder balls were soldered onto Cu, high temperature treated Cu (H-Cu) and graphene coated Cu (G-Cu) substrates, respectively. The microstructure, the interfacial reaction, and the hardness of the solder joints were investigated. The interfacial intermetallic compound (IMC) is Cu<sub>6</sub>Sn<sub>5</sub...
journal article 2018
document
Sun, C. (author), Li, Bijun (author), Li, Yicheng (author), Lu, Z. (author)
To solve the problem that existing driving data cannot correlate to the large number of vehicles in terms of driving risks, is the functionality of intelligent driving algorithm should be improved. This paper deeply explores driving data to build a link between massive driving data and a large number of sample vehicles for driving risk...
journal article 2019
document
Ge, W. (author), Jiao, Yutie (author), Sun, Heqiang (author), Li, Zongkun (author), Zhang, Hexiang (author), Zheng, Yan (author), Guo, Xinyan (author), Zhang, Zhaosheng (author), van Gelder, P.H.A.J.M. (author)
Dam breach has catastrophic consequences for human lives and economy. In previous studies, empirical models are often, to a limited extent, due to the inadequacy of historical dam breach events. Physical models, which focus on simulating human behavior during floods, are not suitable for fast analysis of a large number of dams due to the...
journal article 2019
document
Chen, Z. (author), Wang, Li jun (author), Du, Xiao jia (author), Sun, Zai hong (author), Li, Fu shen (author), Chou, Kuo Chih (author)
A commercial solid oxide fuel cell with a Ni/YSZ anode was characterized under a pure methane atmosphere. The amount of deposited carbon increased with an increase in temperature but decreased when the temperature exceeded 700°C. The reactivity of carbon decreased with increasing deposition temperature. Filamentous carbon was deposited from...
journal article 2019
document
Sun, X. (author), Wang, R. (author), Ould-Chikh, Samy (author), Osadchii, D. (author), Li, G. (author), Aguilar, Antonio (author), Hazemann, Jean louis (author), Kapteijn, F. (author), Gascon, Jorge (author)
Mesoporous nitrogen-doped carbon nanoparticles with atomically dispersed iron sites (named mesoNC-Fe) are synthesized via high-temperature pyrolysis of an Fe containing ZIF-8 MOF. Hydrolysis of tetramethyl orthosilicate (TMOS) in the MOF framework prior to pyrolysis plays an essential role in maintaining a high surface area during the...
journal article 2019
document
Dong, Xichao (author), Hu, Jiaqi (author), Hu, Cheng (author), Li, Y. (author), Sun, Shiyu (author)
The sub-satellite track of geosynchronous synthetic aperture radar (GEO SAR) presents the figure "8" or "O", which causes the great changes of platform motion direction and the different projection of anisotropic irregularities along the line-of-sight (LOS) direction. Due to the almost equal angle velocity to that of Earth, the GEO SAR has...
journal article 2019
document
Gao, Weilun (author), Li, Dongxue (author), Wang, Zhengbing (author), Nardin, William (author), Shao, Dongdong (author), Sun, Tao (author), University, Beijing (author), Cui, Baoshan (author)
River longitudinal profile, a key morphological characteristic of the river channel, is subject to river mouth progradation. Given the increasing influence of human activities and climate change on this critical downstream control, understanding its effects on the evolution of the longitudinal profile is imperative. A general theoretical...
journal article 2020
document
Sun, J. (author), Zhang, Shuo (author), Zhan, Teng (author), Liu, Zewen (author), Wang, Junxi (author), Yi, Xiaoyan (author), Li, Jinmin (author), Sarro, Pasqualina M (author), Zhang, Kouchi (author)
A high responsivity and controllable recovery ultraviolet (UV) photodetector based on a tungsten oxide (WO<sub>3</sub>) gate AlGaN/GaN heterostructure with an integrated micro-heater is reported for the first time. The WO<sub>3</sub>nanolayer was deposited by physical vapor deposition (PVD) for deep UV absorption and the micro-heater was...
journal article 2020
document
Sun, Y. (author), Kang, Xuanwu (author), Zheng, Yingkui (author), Wei, Ke (author), Li, Pengfei (author), Wang, Wenbo (author), Liu, Xinyu (author), Zhang, Kouchi (author)
The optimization of mesa etch for a quasi-vertical gallium nitride (GaN) Schottky barrier diode (SBD) by inductively coupled plasma (ICP) etching was comprehensively investigated in this work, including selection of the etching mask, ICP power, radio frequency (RF) power, ratio of mixed gas, flow rate, and chamber pressure, etc. In particular...
journal article 2020
document
Li, Huajian (author), Sun, Deyi (author), Wang, Zhen (author), Huang, Fali (author), Yi, Zhonglai (author), Yang, Zhengxian (author), Zhang, Y. (author)
Pumping is the most common technique used to transport fresh concrete in construction sites. The large-scale use of concrete all over the world makes the pumping increasingly important. A wide variety of additives and admixtures are incorporated into modern concrete in order for sustainable development. The performance of modern concrete is...
journal article 2020
document
Li, M. (author), Wang, Mian (author), Kang, Jichuan (author), Sun, Liping (author), Jin, Peng (author)
Operation and maintenance (O&amp;M) costs account for a large proportion of the total costs for offshore wind energy. Performing a reasonable maintenance strategy is an effective approach to reduce O&amp;M costs and gain more profits. In this paper, an opportunistic maintenance strategy for offshore wind turbine systems considering...
journal article 2020
document
Wang, K. (author), Li, Jiayuan (author), Huang, Lianzhong (author), Ma, Ranqi (author), Jiang, X. (author), Yuan, Yupeng (author), Mwero, Ngome A. (author), Negenborn, R.R. (author), Sun, Peiting (author), Yan, Xinping (author)
Energy saving and emission reduction have attracted a great deal of attention in the maritime industry. The optimization of a ship's energy efficiency can reduce energy consumption and CO<sub>2</sub> emissions effectively. However, most of the available studies only focus on either the sailing speed or route optimization, and the interaction...
journal article 2020
document
Ren, Jie (author), Sun, Hongfang (author), Li, Qun (author), Li, Z. (author), Ling, Li (author), Zhang, Xiaogang (author), Wang, Yanshuai (author), Xing, Feng (author)
One-part alkali-activated slag (AAS) binders are more promising in large-scale constructions because one-part mixing procedure is safer and easier to handle compared to normal two-part method. Thus, this study aims at investigating different properties of one-part AAS binders and control samples prepared using the two-part method. Experimental...
journal article 2021
document
Lv, Miao (author), Li, Dongyi (author), Zhang, Zhaohan (author), Logan, Bruce E. (author), van der Hoek, J.P. (author), Sun, Muchen (author), Chen, Fan (author), Feng, Yujie (author)
Magnetic seeding coagulation (MSC) process has been used to accelerate flocs sedimentation with an applied magnetic field, offering large handling capacity and low energy consumption. The interactions of three typical Al species, aluminum chloride (AlCl<sub>3</sub>), Al<sub>13</sub>O<sub>4</sub>(OH)<sub>24</sub><sup>7+</sup> polymer (Al<sub...
journal article 2021
Searched for: +
(1 - 20 of 49)

Pages