Searched for:
(1 - 20 of 519)

Pages

document
Wang, Q (author), Wang, X. J. (author), Li, G. Q. (author), Liu, Y. (author)
Band segregation has been found in the H13 die steel produced by the electroslag remelting (ESR) technology. Chemical and metallographic studies have been carried out on a one ton ESR ingot of H13 die steel, so as to understand the formation mechanism of the band segregation. The results indicate that the T.O content and S content decreased...
journal article 2019
document
Liu, Faqi (author), Yang, Hua (author), Yan, R. (author), Wang, Wei (author)
The behaviour of square steel tube confined reinforced concrete columns after fire exposure was studied experimentally and numerically in this paper. Eighteen stub columns were first heated following the ISO 834 standard fire including both heating and cooling phases, and were subsequently loaded to failure after cooling to ambient temperature....
journal article 2019
document
Apostolidis, P. (author), Liu, X. (author), Erkens, Sandra (author), Scarpas, Athanasios (author)
In epoxy-bitumen systems, temperature contributes to the development of physiochemical and mechanical characteristics during curing (chemical hardening) and at the long-term service (oxidative aging) of pavement structures. Hardening (i.e., chemical or oxidative controlled) is a complex phenomenon in epoxy-modified binders and the in-depth...
journal article 2019
document
Zhang, H. (author), Liu, Y. (author), Wang, Lingen (author), Sun, Fenglian (author), Fan, Xuejun (author), Zhang, G.Q. (author)
The nanoindentation test was conducted in this paper to investigate the indentation hardness, plasticity and initial creep properties of pressure sintered nanosilver joint at various test temperatures. The effects of strain rate on the indentation hardness were first investigated. Then yield stress of nanosilver sintered joint was studied in...
journal article 2019
document
Liu, P. (author)
Solid State Lighting (SSL) develops towards small size, high lumen output, high working temperature, and multi-functional applications. These trends are more desirable in miniaturized LED applications such as retrofit G4 LED devices. Retrofit G4 LEDs were chosen in this work as a technical carrier due to the miniaturized size challenge and high...
doctoral thesis 2019
document
Liu, Mengyao (author), Lin, Jintai (author), Folkert Boersma, K. (author), Pinardi, Gaia (author), Wang, Yang (author), Chimot, J.J. (author), Wagner, Thomas (author), Xie, Pinhua (author), Eskes, Henk (author), More Authors (author)
pollution and impact evaluation. For regions with high aerosol loadings, the retrieval accuracy is greatly affected by whether aerosol optical effects are treated implicitly (as additional effective clouds)...
journal article 2019
document
Li, Q. (author), Liu, Xinyuan (author), Eitelberg, G. (author), Veldhuis, L.L.M. (author)
This paper addresses the design of swirl recovery vanes for propeller propulsion in tractor configuration at cruise conditions using numerical tools.Amultifidelity optimization framework is formulated for the design purpose, which exploits low-fidelity potential flow-based analysis results as input for high-fidelity Euler equation-based...
journal article 2019
document
Psychas, D.V. (author), Verhagen, S. (author), Liu, X. (author), Memarzadeh, Y. (author), Visser, H. (author)
This paper presents an analysis of the ionospheric corrections required to get a significant improvement in PPP-RTK performance. The main aim was to determine the improvement in the position precision and Time-To-First-Fix in the PPP-RTK user side using ionospheric corrections computed from a network. The study consists of two main steps. The...
journal article 2019
document
Yuan, Zhenyu (author), Wang, Jie (author), Wang, Y. (author), Liu, Q. (author), Zhong, Yujie (author), Wang, Yu (author), Li, Li (author), Lincoln, Stephen F. (author), Guo, Xuhong (author)
A biocompatible Dex-MA/PAA hydrogel was prepared through copolymerization of glycidyl methacrylate substituted dextran (Dex-MA) with acrylic acid (AA), which was applied as the adsorbent to remove cationic dyes from aqueous solutions. Dex-MA/PAA hydrogel presented a fast adsorption rate and the removal efficiency of Methylene Blue (MB) and...
journal article 2019
document
Abenoza, Roberto F. (author), Liu, Chengxi (author), Cats, O. (author), Susilo, Yusak O. (author)
We examine the effect of weather, accessibility and built-environment characteristics on overall travel experience as well as the experience with the latest trips. These are factors that are often disregarded in the travel satisfaction literature even though they are believed to largely influence the first mile of the door-to-door trip. This...
journal article 2019
document
Shan, M. (author), Liu, X. (author), Wang, X. (author), Liu, Z. (author), Ganapathy, S. (author), Gascon Sabate, J. (author), Kapteijn, F. (author)
capture. Polybenzimidazole (PBI) is one of the leading membrane materials for this separation. In this study, we present superior novel supported PBI (poly(p-phenylene benzobisimidazole), PBDI)...
journal article 2019
document
Liu, M. (author), Cheng, Z. (author), Qian, K. (author), Verhallen, T.W. (author), Wang, C. (author), Wagemaker, M. (author)
The development of safe and high-performance Li-metal anodes is crucial to meet the demanded increase in energy density of batteries. However, severe reactivity of Li metal with typical electrolytes and dendrite formation leads to a poor cycle life and safety concerns. Therefore, it is essential to develop electrolytes that passivate the...
journal article 2019
document
Li, S. (author), Liu, J. (author), Negenborn, R.R. (author)
Over the past two decades, a number of methods have been proposed for solving maritime collision avoidance problems. Most of these works take a single ship's perspective and focus on one-to-one or one-to-many situations. To more complicated many-to-many situations, less attention has been paid. To deal with the many-to-many collision...
journal article 2019
document
Cai, Huayang (author), Savenije, Hubert (author), Garel, Erwan (author), Zhang, Xianyi (author), Guo, Leicheng (author), Zhang, Min (author), Liu, Feng (author), Yang, Qingshu (author)
As a tide propagates into the estuary, river discharge affects tidal damping, primarily via a friction term, attenuating tidal motion by increasing the quadratic velocity in the numerator, while reducing the effective friction by increasing the water depth in the denominator. For the first time, we demonstrate a third effect of river discharge...
journal article 2019
document
Liu, S. (author), Liu, Z. (author), Chavez Muro, J.J. (author), Popov, M. (author)
The main goal of the paper is the modeling of the mechanical circuit breaker (MCB) that can replicate the breaker characteristics in real time environment. The proposed MCB with active current injection is modelled for a system level, which provides adequate representation of the circuit breakers for system analysis studies. External current...
journal article 2019
document
Kan, Xingan (David) (author), Xiao, L. (author), Liu, Hao (author), Wang, M. (author), Schakel, W.J. (author), Lu, Xiao-Yun (author), van Arem, B. (author), Shladover, SE (author), Ferlis, Robert A. (author)
Realistic microscopic traffic simulation is essential for prospective evaluation of the potential impacts of new traffic control strategies. Freeway corridors with interacting bottlenecks and dedicated lanes generate complex traffic flow phenomena and congestion patterns, which are difficult to reproduce with existing microscopic simulation...
journal article 2019
document
Yu, T. (author), Liu, Chuanpu (author), Yu, Haiming (author), Blanter, Y.M. (author), Bauer, G.E. (author)
We theoretically investigate the interlayer dipolar and exchange couplings between an array of metallic magnetic nanowires grown on top of an extended ultrathin yttrium iron garnet film. The calculated interlayer dipolar coupling agrees with observed anticrossings [Chen et al., Phys. Rev. Lett. 120, 217202 (2018)PRLTAO0031-900710.1103...
journal article 2019
document
Liu, K. (author), Ma, M. (author), Wu, Longfei (author), Valenti, M. (author), Cardenas-Morcoso, Drialys (author), Hofmann, Jan P. (author), Bisquert, Juan (author), Gimenez, Sixto (author), Smith, W.A. (author)
was investigated. The uniform planar morphology served as a platform to evaluate the electronic effect isolated from morphological effects while minimizing...
journal article 2019
document
Apostolidis, P. (author), Nahar, Sayeda (author), Liu, X. (author), Lommerts, Bert-Jan (author), Erkens, Sandra (author), Scarpas, Athanasios (author)
The utilization of epoxy-based polymers as bituminous modifiers in developing durable and long-lasting pavement structures have gained increasing interest over the last years showing evidence of high performing materials (1-8). It has been noticed that the addition of epoxy-based modifier into bitumen lead to materials with superior...
conference paper 2019
document
Liu, Y. (author), Zhang, H. (author), Wang, Lingen (author), Fan, Xuejun (author), Zhang, G.Q. (author), Sun, Fenglian (author)
Purpose: Crack and stress distribution on dies are key issues for the pressure-assisted sintering bonding of power modules. The purpose of this research is to build a relationship among stress distributions, sintering sequences and sintering pressures during the sintering processes. Design/methodology/approach: Three sintering sequences, S(a)...
journal article 2019
Searched for:
(1 - 20 of 519)

Pages