Searched for:
(1 - 20 of 503)

Pages

document
Liu, Faqi (author), Yang, Hua (author), Yan, R. (author), Wang, Wei (author)
The behaviour of square steel tube confined reinforced concrete columns after fire exposure was studied experimentally and numerically in this paper. Eighteen stub columns were first heated following the ISO 834 standard fire including both heating and cooling phases, and were subsequently loaded to failure after cooling to ambient temperature....
journal article 2019
document
Apostolidis, P. (author), Liu, X. (author), Erkens, Sandra (author), Scarpas, Athanasios (author)
In epoxy-bitumen systems, temperature contributes to the development of physiochemical and mechanical characteristics during curing (chemical hardening) and at the long-term service (oxidative aging) of pavement structures. Hardening (i.e., chemical or oxidative controlled) is a complex phenomenon in epoxy-modified binders and the in-depth...
journal article 2019
document
Zhang, H. (author), Liu, Y. (author), Wang, Lingen (author), Sun, Fenglian (author), Fan, Xuejun (author), Zhang, G.Q. (author)
The nanoindentation test was conducted in this paper to investigate the indentation hardness, plasticity and initial creep properties of pressure sintered nanosilver joint at various test temperatures. The effects of strain rate on the indentation hardness were first investigated. Then yield stress of nanosilver sintered joint was studied in...
journal article 2019
document
Liu, P. (author)
Solid State Lighting (SSL) develops towards small size, high lumen output, high working temperature, and multi-functional applications. These trends are more desirable in miniaturized LED applications such as retrofit G4 LED devices. Retrofit G4 LEDs were chosen in this work as a technical carrier due to the miniaturized size challenge and high...
doctoral thesis 2019
document
Liu, Mengyao (author), Lin, Jintai (author), Folkert Boersma, K. (author), Pinardi, Gaia (author), Wang, Yang (author), Chimot, J.J. (author), Wagner, Thomas (author), Xie, Pinhua (author), Eskes, Henk (author), More Authors (author)
pollution and impact evaluation. For regions with high aerosol loadings, the retrieval accuracy is greatly affected by whether aerosol optical effects are treated implicitly (as additional effective clouds)...
journal article 2019
document
Liu, K. (author), Smith, W.A. (author), Burdyny, Thomas (author)
review 2019
document
Liu, K. (author), Ma, M. (author), Wu, Longfei (author), Valenti, M. (author), Cardenas-Morcoso, Drialys (author), Hofmann, Jan P. (author), Bisquert, Juan (author), Gimenez, Sixto (author), Smith, W.A. (author)
was investigated. The uniform planar morphology served as a platform to evaluate the electronic effect isolated from morphological effects while minimizing...
journal article 2019
document
Zhang, Chunyan (author), Liu, B. (author), Yu, Baoxing (author), Lu, Xiaopeng (author), Wei, Yong (author), Zhang, Tao (author), Mol, J.M.C. (author), Wang, Fuhui (author)
Surface pretreatment is generally applied before application of protective coatings on Mg alloys, which influences surface microstructure and electrochemical activity of the substrate and has an effect on the coating properties. The effect of various pretreatment processes (sand-blasting, grinding and polishing) on the microstructure and...
journal article 2019
document
Psychas, D.V. (author), Verhagen, S. (author), Liu, X. (author), Memarzadeh, Y. (author), Visser, H. (author)
This paper presents an analysis of the ionospheric corrections required to get a significant improvement in PPP-RTK performance. The main aim was to determine the improvement in the position precision and Time-To-First-Fix in the PPP-RTK user side using ionospheric corrections computed from a network. The study consists of two main steps. The...
journal article 2019
document
Ma, Jiliang (author), van Ommen, J.R. (author), Liu, Daoyin (author), Mudde, R.F. (author), Chen, Xiaoping (author), Pan, Suyang (author), Liang, Cai (author)
The increase of inter-particle cohesive force greatly changes the fluidization dynamics, finally leading to the partial or complete failure of fluidization. However, few studies concern such transition process. This paper investigates the fluidization dynamics of Geldart B particles with a wide-range of cohesive force by analyzing the in-bed...
journal article 2019
document
Zhang, Y. (author), Luo, Liang (author), Ge, Jin (author), Yan, Su Qiong (author), Peng, Yan Xin (author), Liu, Ya Ru (author), Liu, Jin Xiang (author), Liu, C. (author), Ma, Tianqiong (author), More Authors (author)
An "on water" organocatalytic cyanoarylmethylation of aryl acetonitrile to isatins is developed, giving products in high yields and up to excellent diastereoselectivities. A remarkable enhancement of reaction rates and diastereoselectivities by water was observed under mild conditions. Moreover, this approach provides a highly efficient and...
journal article 2019
document
Kan, Xingan (David) (author), Xiao, L. (author), Liu, Hao (author), Wang, M. (author), Schakel, W.J. (author), Lu, Xiao-Yun (author), van Arem, B. (author), Shladover, SE (author), Ferlis, Robert A. (author)
Realistic microscopic traffic simulation is essential for prospective evaluation of the potential impacts of new traffic control strategies. Freeway corridors with interacting bottlenecks and dedicated lanes generate complex traffic flow phenomena and congestion patterns, which are difficult to reproduce with existing microscopic simulation...
journal article 2019
document
Zhang, Youyou (author), Mosallam, Ayman (author), Liu, Yuqing (author), Sun, Yun (author), Xin, H. (author), He, Jun (author)
In this study, flexural behaviors of the pultruded composite laminate were evaluated through experiments and theoretical analysis. Three-point flexural tests were performed for pultruded specimens. The typical failure mode for the longitudinal flexural specimens was local crush on the top surface accompanied with local cracks on the bottom...
journal article 2019
document
Liu, Y. (author), Zhang, H. (author), Wang, Lingen (author), Fan, Xuejun (author), Zhang, G.Q. (author), Sun, Fenglian (author)
Purpose: Crack and stress distribution on dies are key issues for the pressure-assisted sintering bonding of power modules. The purpose of this research is to build a relationship among stress distributions, sintering sequences and sintering pressures during the sintering processes. Design/methodology/approach: Three sintering sequences, S(a)...
journal article 2019
document
Apostolidis, P. (author), Nahar, Sayeda (author), Liu, X. (author), Lommerts, Bert-Jan (author), Erkens, Sandra (author), Scarpas, Athanasios (author)
The utilization of epoxy-based polymers as bituminous modifiers in developing durable and long-lasting pavement structures have gained increasing interest over the last years showing evidence of high performing materials (1-8). It has been noticed that the addition of epoxy-based modifier into bitumen lead to materials with superior...
conference paper 2019
document
Lyu, Maolong (author), Baldi, S. (author), Liu, Zongcheng (author)
This work removes the critical assumptions of continuity, differentiability, and state-independent boundedness, which are typical of compounded disturbances in disturbance observer-based adaptive designs. Crucial in removing such assumptions are a novel observer-based design with state-dependent gain in place of a constant one, and a novel...
journal article 2019
document
Daniel, C.G. (author), Liu, X. (author), Apostolidis, P. (author), Erkens, Sandra (author), Scarpas, Athanasios (author)
The use of synthetic fibres has been reported to enhance the performance of asphalt pavement materials in terms of permanent deformation, fatigue and thermal cracking. However, limited results about the benefits of synthetic fibres in the reinforced warm-mix asphaltic materials, and the exact mechanism of reinforcing the binding part in pavement...
conference paper 2019
document
Abenoza, Roberto F. (author), Liu, Chengxi (author), Cats, O. (author), Susilo, Yusak O. (author)
We examine the effect of weather, accessibility and built-environment characteristics on overall travel experience as well as the experience with the latest trips. These are factors that are often disregarded in the travel satisfaction literature even though they are believed to largely influence the first mile of the door-to-door trip. This...
journal article 2019
document
Li, S. (author), Liu, J. (author), Negenborn, R.R. (author)
Over the past two decades, a number of methods have been proposed for solving maritime collision avoidance problems. Most of these works take a single ship's perspective and focus on one-to-one or one-to-many situations. To more complicated many-to-many situations, less attention has been paid. To deal with the many-to-many collision...
journal article 2019
document
Shan, M. (author), Liu, X. (author), Wang, X. (author), Liu, Z. (author), Ganapathy, S. (author), Gascon Sabate, J. (author), Kapteijn, F. (author)
capture. Polybenzimidazole (PBI) is one of the leading membrane materials for this separation. In this study, we present superior novel supported PBI (poly(p-phenylene benzobisimidazole), PBDI)...
journal article 2019
Searched for:
(1 - 20 of 503)

Pages