Searched for: +
(1 - 20 of 112)

Pages

document
Sun, Yubo (author), Chen, Boyu (author), Zhang, Shizhe (author), Blom, Kees (author), Luković, Mladena (author), Ye, Guang (author)
In recent years, the rapid industrialization and urbanization led to the explosive growth of municipal solid waste incineration (MSWI) bottom ashes (BA) production. However, most of them are directly landfilled, which not only brings environmental burden but also results in loss of potential resources. Present researches have proved that MSWI BA...
conference paper 2021
document
Van Geenhuizen, M.S. (author), Ye, Q. (author), Au-Yong-Oloviera, M. (author)
conference paper 2014
document
Yu, Z. (author), Ye, G. (author)
conference paper 2012
document
Ye, Y. (author), Van Nes, A. (author)
conference paper 2013
document
Yu, Z. (author), Ye, G. (author), Hunger, M. (author), Noort, R. (author)
Chloride-induced corrosion of reinforced concrete is one of the main deterioration mechanisms leading to shortening of the service life of concrete structures. Therefore, assessment of the resistance of concrete to chloride ingress plays an important role in predicting the service life of such structures. The Rapid Chloride Migration (RCM) test...
conference paper 2013
document
Qian, Z. (author), Schlangen, E. (author), Ye, G. (author), Van Breugel, K. (author)
conference paper 2011
document
Huang, H. (author), Ye, G. (author)
conference paper 2013
document
Dong, H. (author), Yao, X. (author), Burgmann, S. (author), Ye, G. (author)
Each year a large amount of construction and demolition waste (CDW) is generated in the European Union. For sustainability development the CDW is recycled and re-used. To promote the use of CDW, recycled aggregates from CDW were incorporated in alkali-activated concrete (AAC), which mainly consisted of secondary materials or industrial by...
conference paper 2021
document
Li, Zhenming (author), Wyrzykowski, Mateusz (author), Dong, Hua (author), Zhang, Shizhe (author), Lura, Pietro (author), Ye, Guang (author)
Alkali activated slag (AAS) has shown promising potential to replace ordinary Portland cement as a binder material. Synthesized from industrial by-products, AAS can show high strength, thermal resistance and good durability. However, AAS has been reported to exhibit high autogenous shrinkage. Autogenous shrinkage is a critical issue for building...
conference paper 2021
document
Huang, H. (author), Ye, G. (author)
conference paper 2012
document
Huang, H. (author), Ye, G. (author), Damidot, D. (author)
In this study, a coupled transport-reaction model was specifically developed for simulating autogenous self-healing in cementitious materials. The diffusion of ions between the solution in the crack and in the bulk paste is simulated with a transport model. The concentration of ions in the crack can be calculated. As the kinetics of chemical...
conference paper 2014
document
Dong, H. (author), Huang, H. (author), Ye, G. (author)
Many types of healing agents have been investigated. These agents are processed in different ways, such as adhesive polymer in capsules or hollow fibre glasses, bacteria in porous aggregates and geo-materials directly incorporated in the cementbased materials. In this study, sodium silicate powder is encapsulated in polystyrene particles ...
conference paper 2013
document
Ye, Q. (author), Schrijer, F.J. (author), Scarano, F. (author)
The fluid dynamics process leading to laminar-turbulent transition behind an isolated roughness element is investigated in the incompressible regime using particle image velocimetry. The study covers the effect of roughness size and geometry on the promotion of transition. The measurement domain covers a large streamwise range from the near wake...
conference paper 2015
document
Sun, Beibei (author), Ye, Guang (author), De Schutter, Geert (author)
Alkali-activated materials(AAM) are known to be environmentally friendly alternatives to cement-based materials because they can potentially reduce greenhouse gas emissions and reutilize industrial by-products. However, the application of AAM is still limited by the lack of mixture design regulation. Unlike cement, the very different chemical...
conference paper 2021
document
Lukovic, M. (author), Savija, B. (author), Schlangen, E. (author), Ye, G. (author), van Breugel, K. (author)
Differential shrinkage between repair material and concrete substrate is considered to be the main cause of premature failure of repair systems (Martinola, Sadouki et al. 2001, Beushausen and Alexander 2007). Magnitude of induced stresses depends on many factors, for example the amount of restraint, moisture gradients caused by different curing...
conference paper 2014
document
Dong, H. (author), Huang, H. (author), Ye, G. (author)
Many types of healing agents have been investigated. These agents are processed in different ways, such as adhesive polymer in capsules or hollow fibre glasses, bacteria in porous aggregates and geo-materials directly incorporated in the cementbased materials. In this study, sodium silicate powder is encapsulated in polystyrene particles ...
conference paper 2013
document
Qiu, Xiujiao (author), Chen, Jiayi (author), Ye, Guang (author), De Schutter, Geert (author)
ASR (alkali-silica reaction) is one of the toughest durability problems in engineering. However, the damage induced by ASR is still fairly unpredictable due to the lack of microstructural information of cement-based materials affected by ASR, while the microstructure determines the global performance. In order to fill this gap, a multiscale...
conference paper 2021
document
Huang, H. (author), Ye, G. (author)
conference paper 2011
document
Iancu, D. (author), Ye, H. (author), Senthilvelan, M. (author), Kotlyar, V. (author), Glossner, J. (author), Moudgill, M. (author), Agrawal, S. (author), Jinturkar, S. (author), Iancu, A. (author), Ramadurai, V. (author)
This paper describes a device capable of performing the following tasks: it samples and decodes the composite video analog TV signal, it encodes the resulting RGB data into a MPEG-4 stream and sends it over a WiMAX link. On the other end of the link a similar device receives the WiMAX signal, in either TDD or FDD mode, decodes the MPEG data and...
conference paper 2007
document
Ye, Q. (author), Schrijer, F.F.J. (author), Scarano, F. (author)
Transitional flow over isolated roughness elements is investigated in the incompressible flow regime using Tomographic PIV. Three different geometries are considered (micro-ramp, cylinder and square) with same height and span. Their effect on accelerating boundary layer transition is compared and discussed. The measurement domain encompasses the...
conference paper 2015
Searched for: +
(1 - 20 of 112)

Pages