Searched for:
(1 - 20 of 28)

Pages

document
Zhang, H. (author), Liu, Y. (author), Wang, Lingen (author), Sun, Fenglian (author), Fan, Xuejun (author), Zhang, G.Q. (author)
The nanoindentation test was conducted in this paper to investigate the indentation hardness, plasticity and initial creep properties of pressure sintered nanosilver joint at various test temperatures. The effects of strain rate on the indentation hardness were first investigated. Then yield stress of nanosilver sintered joint was studied in...
journal article 2019
document
Zhang, Youyou (author), Mosallam, Ayman (author), Liu, Yuqing (author), Sun, Yun (author), Xin, H. (author), He, Jun (author)
In this study, flexural behaviors of the pultruded composite laminate were evaluated through experiments and theoretical analysis. Three-point flexural tests were performed for pultruded specimens. The typical failure mode for the longitudinal flexural specimens was local crush on the top surface accompanied with local cracks on the bottom...
journal article 2019
document
Yu, C. (author), Hageman, J.G. (author), Ganapathy, S. (author), van Eijck, L. (author), Zhang, Long (author), Adair, Keegan R. (author), Sun, Xueliang (author), Wagemaker, M. (author)
at room temperature, makes it an attractive candidate electrolyte for the all-solid-state Li-S battery. A simple synthesis route with an easy scale up process is critical for practical applications. In this work, the highest room...
journal article 2019
document
Liu, Y. (author), Zhang, H. (author), Wang, Lingen (author), Fan, Xuejun (author), Zhang, G.Q. (author), Sun, Fenglian (author)
Purpose: Crack and stress distribution on dies are key issues for the pressure-assisted sintering bonding of power modules. The purpose of this research is to build a relationship among stress distributions, sintering sequences and sintering pressures during the sintering processes. Design/methodology/approach: Three sintering sequences, S(a)...
journal article 2019
document
Zhang, H. (author), Liu, Y. (author), Wang, Lingen (author), Sun, Fenglian (author), Fan, Jiajie (author), Placette, Mark D. (author), Fan, Xuejun (author), Zhang, G.Q. (author)
Modern power electronics has the increased demands in current density and high-temperature reliability. However, these performance factors are limited due to the die attach materials used to affix power dies microchips to electric circuitry. Although several die attach materials and methods exist, nanosilver sintering technology has received...
journal article 2019
document
Sun, B. (author), Fan, J. (author), Fan, Xuejun (author), Zhang, G.Q. (author), Zhang, Guohao (author)
In this paper, a physics of failure-based prediction method is combined with statistical models to consider the impact of current crowding and current droop effects on the reliability of LED arrays. Electronic-thermal models of LEDs are utilized to obtain the operation conditions under the influences of current crowding and current droop. A...
journal article 2019
document
Zhang, Hongyue (author), Sun, Y. (author)
Annual cycles in the geocenter motion time series are primarily driven by mass changes in the Earth’s hydrologic system, which includes land hydrology, atmosphere, and oceans. Seasonal variations of the geocenter motion have been reliably determined according to Sun et al. (J Geophys Res Solid Earth 121(11):8352–8370, 2016) by combining the...
journal article 2018
document
Li, Shengli (author), Liu, Y. (author), Zhang, H. (author), Cai, Hongming (author), Sun, Fenglian (author), Zhang, G.Q. (author)
5 journal article 2018
document
Qian, C. (author), Mirzagheytaghi, Amir (author), Fan, J. (author), Tang, H. (author), Sun, B. (author), Ye, H. (author), Zhang, G.Q. (author)
As an increasing attention towards sustainable development of energy and environment, the power electronics (PEs) are gaining more and more attraction on various energy systems. The insulated gate bipolar transistor (IGBT), as one of the PEs with numerous advantages and potentials for development of higher voltage and current ratings, has been...
journal article 2018
document
Sun, B (author), Fan, Xuejun (author), van Driel, W.D. (author), Cui, C (author), Zhang, G.Q. (author)
In this study, we present a general methodology that combines the reliability theory with physics of failure for reliability prediction of an LED driver. More specifically, an integrated LED lamp, which includes an LED light source with statistical distribution of luminous flux, and a driver with a few critical components, is considered. The...
journal article 2018
document
Sun, B. (author), Fan, J. (author), Fan, Xuejun (author), Zhang, G.Q. (author)
This work studies the effect of randomness of LED's lumen depreciation on reliability of the entire LED lamp. An integrated LED light bulb is selected as carrier of the proposed method. A PoF based lumen depreciation model and electronic-thermal simulations are introduced for reliability prediction. The normal distribution is used to describe...
conference paper 2018
document
Liu, Yang (author), Zhang, H. (author), Wang, Lingen (author), Fan, Xuejun (author), Zhang, G.Q. (author), Sun, Fenglian (author)
The microstructure, thickness, porosity, and shear performance of the silver (Ag) sintering layers under different sintering pressures were investigated. Experimental results demonstrated that the thickness and the porosity of the sintering layer decreased when the sintering pressure varied from 5 MPa to 30 MPa. This densification phenomenon...
journal article 2018
document
Zhang, H. (author), Liu, Yang (author), Wang, Lingen (author), Fan, Jiajie (author), Fan, Xuejun (author), Sun, Fenglian (author), Zhang, G.Q. (author)
High reliable packaging materials are needed for electronics when they work at harsh environments. Among which, the nanosilver material has been widely studied and applied in power electronics due to its low processing temperature and high reliability. This paper investigates the bonding properties of nanosilver sintered hermetic cavity. There...
journal article 2018
document
Zhan, X. (author), Liu, Chuang (author), Zhou, Ge (author), Zhang, Zi-Ke (author), Sun, Gui-Quan (author), Zhu, Jonathan J. H. (author), Jin, Zhen (author)
The interaction between disease and disease information on complex networks has facilitated an interdisciplinary research area. When a disease begins to spread in the population, the corresponding information would also be transmitted among individuals, which in turn influence the spreading pattern of the disease. In this paper, firstly, we...
journal article 2018
document
Zhan, X. (author), Liu, Chuang (author), Sun, Gui-Quan (author), Zhang, Zi-Ke (author)
Research on the interplay between the dynamics on the network and the dynamics of the network has attracted much attention in recent years. In this work, we propose an information-driven adaptive model, where disease and disease information can evolve simultaneously. For the information-driven adaptive process, susceptible (infected)...
journal article 2018
document
Sun, Zhu (author), Yang, J. (author), Zhang, J. (author), Bozzon, A. (author), Huang, Long Kai (author), Xu, Chi (author)
Knowledge graphs (KGs) have proven to be effective to improve recommendation. Existing methods mainly rely on hand-engineered features from KGs (e.g., meta paths), which requires domain knowledge. This paper presents RKGE, a KG embedding approach that automatically learns semantic representations of both entities and paths between entities...
conference paper 2018
document
Yang, J. (author), Sun, Zhu (author), Bozzon, A. (author), Zhang, J. (author), Larson, M.A. (author)
conference paper 2017
document
Sun, B. (author), Fan, Xuejun (author), Ye, H. (author), Fan, Jiajie (author), Qian, Cheng (author), van Driel, W.D. (author), Zhang, G.Q. (author)
In this paper, an integrated LED lamp with an electrolytic capacitor-free driver is considered to study the coupling effects of both LED and driver's degradations on lamp's lifetime. An electrolytic capacitor-less buck-boost driver is used. The physics of failure (PoF) based electronic thermal simulation is carried out to simulate the lamp's...
journal article 2017
document
Sun, Zhu (author), Yang, J. (author), Zhang, Jie (author), Bozzon, A. (author), Chen, Yu (author), Xu, Chi (author)
Representation learning (RL) has recently proven to be effective in capturing local item relationships by modeling item co-occurrence in individual user's interaction record. However, the value of RL for recommendation has not reached the full potential due to two major drawbacks: 1) recommendation is modeled as a rating prediction problem...
conference paper 2017
document
Sun, B. (author), Fan, Xuejun (author), Li, Lei (author), Ye, H. (author), van Driel, W.D. (author), Zhang, G.Q. (author)
This paper studies the interaction of catastrophic failure of the driver and LED luminous flux decay for an integrated LED lamp with an electrolytic capacitor-free LED driver. Electronic thermal simulations are utilized to obtain the lamp's dynamic history of temperature and current for two distinct operation modes: constant current mode (CCM...
journal article 2017
Searched for:
(1 - 20 of 28)

Pages