The effect of a dragging anchor on a horizontal layer of rockfill: A Prototype and a Scale Model Test

Quantifying the penetration depth of a dragging anchor on a horizontal layer of rockfill provides the possibility to optimize the layer thickness of rockfill layers with a protective function. Current research on this subject is limited and is often aimed at anchor capacities in sand and clay. Penetration behaviour in rockfill is mainly...

Stone Stability in Non-uniform Flow

This paper presents the results of an experimental study on stone stability under nonuniform turbulent flow, in particular expanding flow. Detailed measurements of both flow and turbulence and the bed stability are described. Than various manners of quantifying the hydraulic loads exerted on the stones on a bed are extensively reviewed and...

Low-mobility transport of coarse-grained bed material under waves and currents

The Paintal (1967) formula can be used to estimate transport rates of coarse-grained bed material (such as stones from a bed protection) under low hydraulic loads just above the threshold of motion; the application however is limited to steady currents. This paper presents research aimed at extending the range of application to a combination of...

Scour around an offshore windturbine

During the construction of the first Dutch offshore wind farm prototype measurements were performed. These measurements were aimed to monitor the behaviour of the granular filter layer of the scour protection around the mono-piles upon which the wind turbines are founded. These measurements were compared to scale model test results and...

Stone stability under decelerating open-channel flow

The current research is aimed at finding a proper relation between flow forces acting on the bed and the bed response. To this end, experiments were carried out in which both the bed response (quantified by a dimensionless entrainment rate) and the flow field (velocity and turbulence intensity distributions) are measured. The three available...

Stone stability under non-uniform flow

The current research is aimed at finding a dimensionless stability parameter for non-uniform flow in which the effect of turbulence is incorporated. To this end, experiments were carried out in which both the bed response (quantified by a dimensionless entrainment rate) and the flow field (velocity and turbulence intensity distributions) are...

Void porosity measurements in coastal structures

The paper describes the use of two fundamental design parameters, the void porosity and layer thickness in rock armour constructions. These design parameters are very sensible for factors such as the boundary definition of a rock layer, rock production properties, intrinsic properties and construction properties. Differences in the value of the...