Multi Physics Simulation of Wafer Bonding with Nano Copper Paste

The significance of wafer bonding is fundamental to the progression of electronic systems. Common fabrication techniques for Cu pillars play a crucial role in establishing resilient and efficient interconnects within semiconductor devices. It is imperative to explore the potential of nano-copper as an alternative material to overcome limitations...

Understanding the interaction of nucleotides with UVC light: an insight from quantum chemical calculation-based findings

Short-wave ultraviolet (also called UVC) irradiation is a well-adopted method of viral inactivation due to its ability to damage genetic material. A fundamental problem with the UVC inactivation method is that its mechanism of action on viruses is still unknown at the molecular level. To address this problem, herein we investigate the...

A novel lattice model to predict chloride diffusion coefficient of unsaturated cementitious materials based on multi-typed pore structure characteristics

This paper develops a novel lattice diffusive model to quantitatively study the chloride diffusion coefficient in unsaturated cementitious materials, in which the pore voxels are redistributed to make a better representation of a real microstructure of hardened cement paste. Considering the hierarchical microstructure and different drying...

Reverse Recovery Optimization of Multiepi Superjunction MOSFET Based on Tunable Doping Profile

This paper proposes and simulates research on the reverse recovery characteristics of two novel superjunction (SJ) MOSFETs by adjusting the doping profile. In the manufacturing process of the SJ MOSFET using multilayer epitaxial deposition (MED), the position and concentration of each Boron bubble can be adjusted by designing different doping...

Laser-Induced Graphene Formation on Chitosan Derivatives toward Ecofriendly Electronics

Laser-induced graphene (LIG) has aroused a wide range of research interests ranging from micro-nano energy devices to the Internet of Things (IoT). Nevertheless, the non-degradability of most-used synthetic polymer carbon sources poses a serious threat to the environment. In this work, ecofriendly chitosan-based derivatives, including...

Rapid Fabrication of High-Performance Flexible Pressure Sensors Using Laser Pyrolysis Direct Writing

The fabrication of flexible pressure sensors with low cost, high scalability, and easy fabrication is an essential driving force in developing flexible electronics, especially for high-performance sensors that require precise surface microstructures. However, optimizing complex fabrication processes and expensive microfabrication methods...

Hydrogenated Boron Phosphide with the excellent tunability of electronic properties and Current-Voltage responses

Combining the first principles calculations and the non-equilibrium Green’s function formalisms, we decipher the structural, electronic, and transport properties of boron phosphide (BP) with hydrogenation. Hydrogenated BP monolayer is an indirect semiconductor with a wide-bandgap of 3.76 eV that is favorable in power devices. We find that the...

Electron-Irradiation-Induced Degradation of Transfer Characteristics in Super-Junction VDMOSFET

High electric-field stress is an effective solution to the recovery of irradiated devices. In this paper, the dependence of the recovery level on the magnitude of gate voltage and duration is investigated. Compared with the scheme of high gate-bias voltage with a short stress time, the transfer characteristics are significantly recovered by...

Coalescence kinetics and microstructure evolution of Cu nanoparticles sintering on substrates: a molecular dynamics study

Nano copper sintering technology has great potential to be widely applied in the wide-bandgap semiconductor packaging. In order to investigate the coalescence kinetics of copper nano particles for this application, a molecular dynamic (MD) simulation was carried out at low temperature on a special model containing two substrate and multiple...

Sintering mechanism of Ag nanoparticle-nanoflake: a molecular dynamics simulation

This paper studied the behaviors of sintering between Ag nanoparticle (NP) and nanoflake (NF) in the same size by molecular dynamics simulation. Before the sintering simulation, the melting simulation of NF was carried out to calculate the melting points of NFs and investigate the thermostability of NF. The Lindemann index and potential...

A facile method to prepare oriented boron nitride-based polymer composite with enhanced thermal conductivity and mechanical properties

Hexagonal boron nitride (BN) is often used as filler to improve the thermal conductivity of polymer matrix due to its high thermal conductivity. However, previously reported BN-based composites always have a high in-plane thermal conductivity, which is not beneficial for vertical heat dissipation. In addition, high BN content results in the...

High-Voltage and High-Current IGBT Press-pack Module for Power Grid

On the basis of the development and application requirements of flexible DC transmission techniques, a 1 kA/10 kV half-bridge IGBT press-pack module is studied. The module is composed of three subunits in series, and each subunit consists of IGBT chips in parallel. In order to solve the problem of chips failure caused by non-uniform rigid...

Effects of shell thickness on the thermal stability of Cu-Ag core-shell nanoparticles: A molecular dynamics study

Cu-Ag core-shell (CS) nanoparticle (NP) is considered as a cost-effective alternative material to nano silver sintering material in die attachment application. To further reduce the cost, the thickness of the Ag shell can be adjusted. Whereas the shell thickness will also affect the thermal stability of the Cu-Ag CSNPs. In this study, molecular...

Hydrogenated Boron Phosphide THz-Metamaterial-Based Biosensor for Diagnosing COVID-19: A DFT Coupled FEM Study

Recent reports focus on the hydrogenation engineering of monolayer boron phosphide and simultaneously explore its promising applications in nanoelectronics. Coupling density functional theory and finite element method, we investigate the bowtie triangle ring microstructure composed of boron phosphide with hydrogenation based on structural and...

Cancer Diagnosis Using Terahertz-Graphene-Metasurface-Based Biosensor with Dual-Resonance Response: Nanomaterials

Owing to the outstanding physical properties of graphene, its biosensing applications implemented by the terahertz metasurface are widely concerned and studied. Here, we present a novel design of the graphene metasurface, which consists of an individual graphene ring and an H-shaped graphene structure. The graphene metasurface exhibits a dual...

Strain-engineered S-HfSe₂ monolayer as a promising gas sensor for detecting NH₃: A first-principles study

The development of high-performance gas sensing materials is one of the development trends of new gas sensor technology. In this work, in order to predict the gas-sensitive characteristics of HfSe₂ and its potential as a gas-sensitive material, the interactions of nonmetallic element (O, S, Te) doped HfSe₂ monolayer and...

Fabrication of Nanoslits with <111> Etching TSWE Method

In this paper, we report a modified three step anisotropic wet etching (TSWE) method to fabricate solid-state silicon nanoslits. The slit-opening process is performed by &lt;111&gt; crystal plane etching. The etching rate of the &lt;111&gt; crystal plane is reasonably slow as it is only 1/45 of the &lt;100&gt; etching rate, thus allowing and...

Durable lubricant-infused anodic aluminum oxide surfaces with high-aspect-ratio nanochannels

Recently, lubricant-infused surfaces (LIS) have emerged as a prominent class of surface technology for antifouling, anti-icing and anticorrosion applications. However, long-term corrosion exposure and mechanical damages may deteriorate the practical performance of LIS during application. In this study, a robust LIS was fabricated by the...