Searched for:
(1 - 15 of 15)
document
Prasad, R. (author), Joshi, R. (author), Bons, J.H. (author)
journal article 1992
document
Joshi, R. (author), Arnbak, J.C. (author), Prasad, R. (author)
journal article 1992
document
Ohmi, K. (author), Joshi, B. (author), Sultan, A. (author), Alaa, A. (author)
Particle path based image velocimetry has been developed for 3D volumetric velocity measurement of fluid flows. The proposed method is basically based on the tomographic reconstruction of 3D particle paths by using multiple camera views of long exposure particle images. Particle path based image velocimetry was popular in the early days of 2D...
conference paper 2013
document
Aldaz, G. (author), Shluzas, L.A. (author), Pickham, D. (author), Eris, O. (author), Sadler, J. (author), Joshi, S. (author), Leifer, L. (author)
Chronic wounds, including pressure ulcers, compromise the health of 6.5 million Americans and pose an annual estimated burden of $25 billion to the U.S. health care system. When treating chronic wounds, clinicians must use meticulous documentation to determine wound severity and to monitor healing progress over time. Yet, current wound...
journal article 2015
document
Rayleigh-Bénard convection is a canonical system for the investigation of buoyancy-driven natural convection phenomena which abound in nature and technology. Under the influence of rotation and depending on the system parameters, the flow exhibits different regimes with disparate heat transfer characteristics even in the turbulent state. The...
conference paper 2015
document
Joshi, Y.V. (author)
Co-firing biomass with coal in pulverized fuel boilers is a readily implementable means for attaining renewable electricity generation targets. Even as utilities have gained considerable operational experience over the past years with co-firing small quantities (0-3% on energy basis) of assorted biomass and waste residues for power production,...
doctoral thesis 2015
document
Joshi, S. (author), Savov, A.M. (author), Dekker, R. (author)
This paper focuses on the implementation of a new technique for the fabrication of stretchable electronic patches that can be used for medical applications. The technique is based on the Electronics on Plastics by Laser Release (EPlaR) technology which enables a one-step release of a stack of flexible/stretchable layers incorporating the active...
journal article 2016
document
Shafqat, Salman (author), Hoefnagels, Johan P.M. (author), Savov, A.M. (author), Joshi, S. (author), Dekker, R. (author), Geers, Marc G.D. (author)
The exciting field of stretchable electronics (SE) promises numerous novel applications, particularly in-body and medical diagnostics devices. However, future advanced SE miniature devices will require high-density, extremely stretchable interconnects with micron-scale footprints, which calls for proven standardized (complementary metal-oxide...
journal article 2017
document
Joshi, S. (author), Bagani, R. (author), Beckers, Lucas (author), Dekker, R. (author)
This paper reports the use of rubber—Polybutadiene as an intermediate adhesive layer for improving the adhesion between polyimide (PI) and silicone polydimethylsiloxane (PDMS) which is required for a reliable fabrication of flexible/stretchable body patches for various applications. The adhesive bond initiated by the butyl rubber (BR), apart...
conference paper 2017
document
Joshi, K.C. (author)
doctoral thesis 2017
document
Savov, A.M. (author), Joshi, S. (author), Shafqat, Salman (author), Hoefnagels, Johan (author), Louwerse, M.C. (author), Stoute, R. (author), Dekker, R. (author)
A device for studying the mechanical and electrical behavior of free-standing micro-fabricated metal structures, subjected to a very large deformation, is presented in this paper. The free-standing structures are intended to serve as interconnects in high-density, highly stretchable electronic circuits. For an easy, damage-free handling and...
journal article 2018
document
Joshi, S. (author), Savov, A.M. (author), Shafqat, Salman (author), Dekker, R. (author)
The authors found that oxygen plasma etching of polyimide (PI) with aluminum (Al) as a hard-etch mask results in lightly textured arbitrary shaped “fur-like” residues. Upon investigation, the presence of Al was detected in these residues. Ruling out several causes of metal contamination that were already reported in literature, a new theory for...
journal article 2018
document
Joshi, S. (author)
Advancements in stretchable electronic systems have changed the way modern electronics interact with their target systems, by their conformability to more complex shapes as compared to conventional rigid or flexible electronics. By utilizing this, limitless applications in the field of healthcare can be realized, such as wearable and implantable...
doctoral thesis 2018
document
Holland, Oliver (author), Steinbach, Eckehard (author), Venkatesha Prasad, R.R. (author), Liu, Qian (author), Dawy, Zaher (author), Aijaz, Adnan (author), Pappas, Nikolaos (author), Joshi, K.C. (author), Rao, V.S. (author), More Authors (author)
The IEEE 'Tactile Internet' (TI) Standards working group (WG), designated the numbering IEEE 1918.1, undertakes pioneering work on the development of standards for the TI. This paper describes the WG, its intentions, and its developing baseline standard and the associated reasoning behind that and touches on a further standard already...
journal article 2019
document
Joshi, P.D. (author)
Networks such as road networks, utility networks, computer and communication networks and even social networks are the backbone of human civilization. Network analysis enables quantitative measurement of the important criteria such<br/>as delays, ease of routing and fault tolerance, and is required to build efficient and robust networks....
doctoral thesis 2019
Searched for:
(1 - 15 of 15)