On improving process efficiency and weld quality in ultrasonic welding of misaligned thermoplastic composite adherends

This paper evaluates the potential of changing the welding force and the compliance of the energy director (ED) to reduce the effects caused by misaligned adherends, which were: increased through-thickness heating, reduced size of welded area and increased heating time. In the methodology that was followed, we welded adherends misaligned by...

On the sensitivity of the ultrasonic welding process of epoxy- to polyetheretherketone (PEEK)-based composites to the welding force and amplitude of vibrations

This paper addresses the sensitivity of the ultrasonic welding process for joining dissimilar composites to variations in either the welding force or amplitude of vibrations. For that, carbon fibre (CF)/epoxy specimens were welded to CF/polyetheretherketone (PEEK) specimens, through a polyetheretherimide (PEI) coupling layer co-cured with the...

Thin-plies in adhesively bonded carbon fiber reinforced polymers

The aim of this study is to evaluate the enhanced off-axis properties of thin plies to improve the performance of adhesively bonded carbon fiber reinforced polymers. Single lap bonded joints with three different ply thicknesses of 200 μm, 100 μm and 50 μm were tested under quasi-static tensile loading. Acoustic Emission and Digital Image...

Towards robust sequential ultrasonic spot welding of thermoplastic composites: Welding process control strategy for consistent weld quality

The research in this paper is an essential part of a bigger effort on developing robust sequential ultrasonic welding of multi-spot welded joints in thermoplastic composites. It mainly focused on assessing the impact of the changes in boundary conditions on the welding process and whether it could be circumvented by using an appropriate...

Mechanical behaviour of thermoplastic composites spot-welded and mechanically fastened joints: A preliminary comparison

The in-plane and out-of-plane mechanical behaviour of both ultrasonically spot-welded and mechanically fastened joints was investigated by double-lap shear and pull-through tests, respectively. Spot-welded specimens showed comparable onset failure load and significantly higher joint stiffness compared to mechanical fasteners when carrying shear...