Searched for: +
(1 - 20 of 52)

Pages

document
Zhang, P. (author), He, C. (author), Shen, C. (author), Dollevoet, R.P.B.J. (author), Li, Z. (author)
Wheel-rail high-frequency interaction is closely related to the formation of railway short-wave defects. Finite element (FE) method has been widely used to simulate wheel-rail dynamic systems, but its validity in modelling high-frequency interaction has not been fully demonstrated in three dimensions (3D). This work aims at comprehensively...
journal article 2024
document
Wang, J. (author), Li, Runlong (author), Zhang, Xinqi (author), He, Yuan (author)
As one of the crucial sensors for environment sensing, frequency modulated continuous wave (FMCW) radars are widely used in modern vehicles for driving assistance/autonomous driving. However, the limited frequency bandwidth and the increasing number of equipped radar sensors would inevitably cause mutual interference, degrading target...
journal article 2024
document
He, C. (author), Yang, Z. (author), Zhang, P. (author), Li, S. (author), Naeimi, M. (author), Dollevoet, R.P.B.J. (author), Li, Z. (author)
Polygonal wear is a type of damage commonly observed on the railway wheel tread. It induces wheel-rail impacts and consequent train/track components failure. This study presents a finite element (FE) thermomechanical wheel-rail contact model, which is able to cope with the three possible generation and development mechanisms of polygonal wear...
journal article 2024
document
Li, S. (author), Naeimi, M. (author), He, C. (author), Dollevoet, R.P.B.J. (author), Li, Z. (author)
The mechanism of rail short pitch corrugation has remained elusive in the past. The damage mechanisms of the corrugation are reported to be differential wear or plastic deformation. The former has been extensively studied, while the plastic deformation, especially under multiple wheel passages has been seldom studied. To uncover the facts...
journal article 2023
document
Guo, Junfei (author), Li, Ze (author), Wei, Pan (author), Li, Ling (author), Yang, Xiaohu (author), He, Ya Ling (author), Hooman, K. (author)
The integration of phase change materials (PCMs) and metal foam has been widely concerned recently. To decrease non-uniformity of uniform metal foam-PCMs, adaptive metal foam arrangement strategy with increasing porosity from inside to outside has attracted widespread attention. This work conducted a symmetric simulation model of vertical...
journal article 2023
document
Zhu, X. (author), Hong, Ning (author), He, Fang (author), Lin, Yu (author), Li, L. (author), Fu, Xiaowen (author)
The terminal airspace that surrounds an airport is the area with high flight density and complex structure. Aircraft are asked to follow the standard arrival and departure routes in terminal airspace, yet the actual trajectories may deviate due to air traffic control (ATC) instructions, pilots' decisions, surveillance and flying performance...
journal article 2023
document
Ye, Xiangqian (author), Xiao, Zhenyong (author), He, Chuang (author), Li, Wenyu (author), Lin, P. (author), Meng, Yuanyuan (author), Hu, Chichun (author)
This study systematically investigated the potential of waste carbon fibers (WCFs) as a sustainable solution in enhancing the multiple induction heating healing of asphalt mixture, thereby tackling two major concerns: the environmental impact of WCFs and the durability of asphalt pavement. Firstly, four groups of asphalt binder samples with...
journal article 2023
document
Li, Bo (author), Liu, Qiuhong (author), Wang, T. (author), He, He (author), Peng, You (author), Feng, Tao (author)
Outdoor physical activities can promote public health and they are largely influenced by the built environment in different urban settings. Understanding the association between outdoor physical activities and the built environment is important for promoting a high quality of life. Existing studies typically focus on one type of outdoor activity...
journal article 2022
document
He, Yuxin (author), Li, L. (author), Zhu, X. (author), Tsui, Kwok Leung (author)
Short-term forecasting of passenger flow is critical for transit management and crowd regulation. Spatial dependencies, temporal dependencies, inter-station correlations driven by other latent factors, and exogenous factors bring challenges to the short-term forecasts of passenger flow of urban rail transit networks. An innovative deep...
journal article 2022
document
Li, Bo (author), Wang, Yue (author), Wang, T. (author), He, Xiaoman (author), Kazak, Jan K. (author)
With the advancement of urbanization, the stress on the green infrastructure around the urban agglomeration has intensified, which causes severe ecological problems. The uncertainty of urban growth makes it difficult to achieve effective protection only by setting protection red lines and other rigid measures. It is of practical significance to...
journal article 2022
document
Liu, Xinxin (author), Li, Shuoshuo (author), Liu, Liang (author), He, Chao (author), Sun, Zhuang (author), Özdemir, F. (author), Aziz, Muhammad (author), Kuo, Po-Chih (author)
Because of their compact structure, ease of processing and higher heat transfer coefficient, curved-tube heat exchangers are widely applied in various industry applications, such as nuclear power systems, solar-powered engineering, aircraft engine cooling systems and refrigeration and cryogenic systems. Accurate knowledge about the heat transfer...
journal article 2022
document
Liang, M. (author), Li, Z. (author), He, S. (author), Chang, Z. (author), Gan, Y. (author), Schlangen, E. (author), Šavija, B. (author)
Stress evolution of restrained concrete is a significant direct index in early-age cracking (EAC) analysis of concrete. This study presents experiments and numerical modelling of the early-age stress evolution of Ground granulated blast furnace slag (GGBFS) concrete, considering the development of autogenous deformation and creep. Temperature...
journal article 2022
document
Yin, Kangting (author), Jiang, Yaqing (author), He, Hui (author), Ren, Jie (author), Li, Z. (author)
In this paper, fresh (setting and rheology) and hardened properties (strength and shrinkage) of one-part alkali-activated slag (AAS) with and without rice straw ash (RSA) are comprehensively investigated. The reaction kinetics and microstructure of the mixtures are characterized by a series of experimental techniques. The results reveal that...
journal article 2022
document
He, Xinyu (author), He, Fang (author), Li, L. (author), Zhang, Lei (author), Xiao, Gang (author)
High-tech giants and start-ups are investing in drone technologies to provide urban air delivery service, which is expected to solve the last-mile problem and mitigate road traffic congestion. However, air delivery service will not scale up without proper traffic management for drones in dense urban environment. Currently, a range of Concepts...
journal article 2022
document
Li, Xinyu (author), He, Yuan (author), Fioranelli, F. (author), Jing, Xiaojun (author)
Human activity recognition (HAR) plays a vital role in many applications, such as surveillance, in-home monitoring, and health care. Portable radar sensor has been increasingly used in HAR systems in combination with deep learning (DL). However, it is both difficult and time-consuming to obtain a large-scale radar dataset with reliable labels...
journal article 2022
document
Wang, J. (author), Li, Runlong (author), He, Yuan (author), Yang, Yang (author)
In this article, the interference mitigation (IM) problem is tackled as a regression problem. A prior-guided deep learning (DL)-based IM approach is proposed for frequency-modulated continuous-wave (FMCW) radars. Considering the complex-valued nature of radar signals, a complex-valued convolutional neural network, which is different from the...
journal article 2022
document
Zhu, Xinting (author), Lin, Yu (author), He, Yuxin (author), Tsui, Kwok Leung (author), Chan, Pak Wai (author), Li, L. (author)
With the dynamic air traffic demand and the constrained capacity resources, accurately predicting airport throughput is essential to ensure the efficiency and resilience of air traffic operations. Many research efforts have been made to predict traffic throughputs or flight delays at an airport or over a network. However, it is still a...
journal article 2022
document
He, C. (author), Yang, Z. (author), Zhang, P. (author), Li, S. (author), Naeimi, M. (author), Li, Z. (author)
Polygonal wear is a common type of damage on the railway wheel tread, which could induce wheel-rail impacts and further components failure. This study presents a finite element (FE) thermomechanical model to investigate the causes of wheel polygonal wear. The FE model is able to cope with three possible causes of polygonal wear: thermal...
conference paper 2022
document
Guo, R. (author), Yuan, Peng (author), Han, Xiying (author), He, Xuexia (author), Lu, Jiangbo (author), Li, Qi (author), Dang, Liqin (author), Sun, Jie (author), Liu, Zonghuai (author), Lei, Zhibin (author)
The Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub> film with metallic conductivity and high pseudo-capacitance holds profound promise in flexible high-rate supercapacitors. However, the restacking of Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub> sheets hinders ion access to thick film electrodes. Herein, a mild yet green route has been developed to...
journal article 2022
document
He, X. (author), Jiang, C. (author), Li, L. (author), Blom, H.A.P. (author)
UAS-based commercial services such as urban parcel delivery are expected to grow in the upcoming years and may lead to a large volume of UAS operations in urban areas. These flights may pose safety risks to persons and property on the ground, which are referred to as third-party risks. Path-planning methods have been developed to generate a...
journal article 2022
Searched for: +
(1 - 20 of 52)

Pages