Searched for:
(1 - 20 of 516)

Pages

document
Mulder, Maarten (author), Li, Xuesong X. (author), Nazim, M.M. (author), Dalgliesh, Robert M. (author), Tian, B. (author), Buijse, Marten (author), van Wunnik, John (author), Bouwman, W.G. (author)
O, an alkane, an anionic internal olefin sulfonate surfactant, salt and secondary butyl alcohol (SBA) as co-solvent are studied in a systematic way. In four different sample sets, either the salt content, SBA content or alkane carbon number was varied in order to study the effects of the...
journal article 2019
document
Wang, Q (author), Wang, X. J. (author), Li, G. Q. (author), Liu, Y. (author)
Band segregation has been found in the H13 die steel produced by the electroslag remelting (ESR) technology. Chemical and metallographic studies have been carried out on a one ton ESR ingot of H13 die steel, so as to understand the formation mechanism of the band segregation. The results indicate that the T.O content and S content decreased...
journal article 2019
document
Li, Wei (author), Li, Zongkun (author), Ge, W. (author), Wu, Sai (author)
The internal mechanism affecting life loss caused by a dam-break flood is complicated. On the basis of analyzing the risk formation path, a risk evaluation indicator system was established which included the hazards, exposure and vulnerability factors. Variable Fuzzy Sets theory was introduced into the risk evaluation of life loss risk grades...
journal article 2019
document
Röggla, Thomas (author), Li, Jie (author), Fjellsten, Stefan (author), Jansen, Jack (author), Kegel, Ian (author), Pilgrim, Luke (author), Trimby, Martin (author), Williams, Doug (author), Cesar Garcia, P.S. (author)
While traditional live-broadcasting is typically comprised of a handful of well-defined workflows, these become insufficient when targeting multiple screens and interactive companion devices on the viewer side. In this case study, we describe the development of an end-to-end system enabling immersive and interactive experiences using an...
conference paper 2019
document
Wu, Meimei (author), Ge, W. (author), Li, Zongkun (author), Wu, Zening (author), Zhang, Hexiang (author), Li, Juanjuan (author), Pan, Yipeng (author)
Despite the rapid development of risk analysis in dam engineering, there is a relative absence of research on the environmental impact of dam break. As a systematic theory, set pair analysis has a good effect in dealing with uncertainties, although the result is relatively rough and easy to distort. A connection degree of five grades and a...
journal article 2019
document
Li, S. (author), de Wagter, C. (author), de Visser, C.C. (author), Chu, Q. P. (author), de Croon, G.C.H.E. (author)
High-speed flight in GPS-denied environments is currently an important frontier in the research on autonomous flight of micro air vehicles. Autonomous drone races stimulate the advances in this area by representing a very challenging case with tight turns, texture-less floors, and dynamic spectators around the track. These properties hamper...
journal article 2019
document
Li, Y. (author)
Safety management systems (SMSs) have gained importance since the 1970s and changed focus from individual management activities to more systematic frameworks. The methods, techniques and tools used in them also became more and more sophisticated. However, from the perspectives of the researcher, company, auditor, government and (safety...
doctoral thesis 2019
document
Li, J. (author)
With the growth of global population, the big cities become increasingly crowded. It is not rare to see large crowds in public transportations and events with masses of visitors, such as music festivals and football matches. The question “How to deal with crowds” is receiving attention, both from academia and practical crowd management.
This...
doctoral thesis 2019
document
Ma, Jiaming (author), Wei, Yinping (author), Gan, Lin (author), Wang, C. (author), Xia, Heyi (author), Lv, Wei (author), Li, Jia (author), Li, Baohua (author), Yang, Quan Hong (author), Kang, Feiyu (author), He, Yan Bing (author)
(LTO) microspheres consisting of densely packed primary nanoparticles. The real space distribution of lithium ions inside the...
journal article 2019
document
Li, Mengxia (author), Mou, Junmin (author), Liu, Rongfang (author), Chen, P. (author), Dong, Zhuojian (author), He, Yixiong (author)
Following the growth in global trade activities, vessel traffic has increased dramatically in some busy waterways and ports. However, such increments have made it more complex to manage the regional vessel traffic, which can increase the risk of an accident in the area. To model and analyze the relationship between vessel traffic and maritime...
journal article 2019
document
Liu, Changjiang (author), Li, Y. (author), Ao, Dongyang (author), Tian, Haiyan (author)
Radar sensors offer several advantages over optical sensors in the gesture recognition for remote control of electronic devices. In this paper, we investigate the feasibility of human gesture recognition using the spectra of radar measurement parameters. With the combination of radar theory and classification methods, we found that the...
journal article 2019
document
Afanasiev, D. (author), Gatilova, A. (author), Groenendijk, D.J. (author), Ivanov, B. A. (author), Gibert, M (author), Gariglio, S (author), Mentink, J. (author), Li, J (author), Caviglia, A. (author), More Authors (author)
Ultrafast photodoping of the Mott insulators, possessing strong correlation between electronic and magnetic degrees of freedom, holds promise for launching an ultrafast dynamics of spins which cannot be described in terms of conventional models of ultrafast magnetism. Here we study the ultrafast laser-induced dynamics of the magnetic order in...
journal article 2019
document
Yang, Z. (author), Deng, X. (author), Li, Z. (author)
The modeling of dynamic frictional rolling contact is crucial for accurately predicting behavior and deterioration of structures under dynamic interactions such as wheel/rail, tire/road, bearings and gears. However, reliable modeling of dynamic frictional rolling contact is challenging, because it requires a careful treatment of friction and...
journal article 2019
document
Li, M. (author), Albayrak, A. (author), Zhang, Yu (author), van Eijk, D.J. (author), Yang, Zengyao (author)
The usability now serves as a fundamental quality of a computational device, e.g. smartphone. Moreover, the smartphone has firmly embedded into our daily life as an indispensable part, so the context and style that user may interact with them are largely different from a decade ago. Nowadays, testing usability with end user has become a...
conference paper 2019
document
Li, Z. (author), Zhang, S. (author), Zuo, Y. (author), Chen, Wei (author), Ye, G. (author)
Chemical deformation (chemical shrinkage/expansion), the absolute volume change during reactions, is a key parameter influencing the volume stability, especially the autogenous deformation of a binder material. This work, for the first time, reports an in-depth investigation on the chemical deformation of metakaolin based geopolymer (MKG)....
journal article 2019
document
Chen, Y. (author), Li, Z. (author), Chaves Figueiredo, S. (author), Copuroglu, Oguzhan (author), Veer, F.A. (author), Schlangen, E. (author)
The goal of this study is to investigate the effects of different grades of calcined clay on the extrudability and early-age strength development under ambient conditions. Four mix designs were proposed. Three of them contained high, medium, and low grades of calcined clay, respectively, and one was the reference without calcined clay. In terms...
journal article 2019
document
Deng, X. (author), Li, Z. (author), Qian, Zhiwei (author), Zhai, Wan Ming (author), Xiao, Qian (author), Dollevoet, R.P.B.J. (author)
Weld-induced squats are a major damage type in high-speed railways as well as in conventional railways. They incur high maintenance costs and endanger operational safety. This paper first presents and analyzes five-year continual field monitoring observations and measurements of squats at rail welds. A hypothesis of the formation and development...
journal article 2019
document
Hedayati, R. (author), Jedari Salami, S. (author), Li, Y. (author), Sadighi, M. (author), Zadpoor, A.A. (author)
We study a special class of mechanical metamaterials, namely lattices, based on beams (struts) with nonuniform cross sections, of which pentamode mechanical metamaterials are a special case. Five symmetric beam types including simple cylinder, concave double cone, convex double cone, concave hyperbolic, and convex hyperbolic are considered....
journal article 2019
document
Chen, Z. (author), Wang, Li jun (author), Du, Xiao jia (author), Sun, Zai hong (author), Li, Fu shen (author), Chou, Kuo Chih (author)
A commercial solid oxide fuel cell with a Ni/YSZ anode was characterized under a pure methane atmosphere. The amount of deposited carbon increased with an increase in temperature but decreased when the temperature exceeded 700°C. The reactivity of carbon decreased with increasing deposition temperature. Filamentous carbon was deposited from...
journal article 2019
document
Li, Y. (author), Lietaert, Karel (author), Li, W. (author), Zhang, X.Y. (author), Leeflang, M.A. (author), Zhou, J. (author), Zadpoor, A.A. (author)
The corrosion fatigue behavior of additively manufactured topologically ordered porous iron based on diamond unit cells was studied for the first time to understand its response to cyclic loading in a simulated physiological environment. The material exhibited high fatigue resistance with fatigue strengths being 70% and 65% of yield stress in...
journal article 2019
Searched for:
(1 - 20 of 516)

Pages