Searched for:
(1 - 20 of 508)

Pages

document
Liu, Faqi (author), Yang, Hua (author), Yan, R. (author), Wang, Wei (author)
The behaviour of square steel tube confined reinforced concrete columns after fire exposure was studied experimentally and numerically in this paper. Eighteen stub columns were first heated following the ISO 834 standard fire including both heating and cooling phases, and were subsequently loaded to failure after cooling to ambient temperature....
journal article 2019
document
Apostolidis, P. (author), Liu, X. (author), Erkens, Sandra (author), Scarpas, Athanasios (author)
In epoxy-bitumen systems, temperature contributes to the development of physiochemical and mechanical characteristics during curing (chemical hardening) and at the long-term service (oxidative aging) of pavement structures. Hardening (i.e., chemical or oxidative controlled) is a complex phenomenon in epoxy-modified binders and the in-depth...
journal article 2019
document
Zhang, H. (author), Liu, Y. (author), Wang, Lingen (author), Sun, Fenglian (author), Fan, Xuejun (author), Zhang, G.Q. (author)
The nanoindentation test was conducted in this paper to investigate the indentation hardness, plasticity and initial creep properties of pressure sintered nanosilver joint at various test temperatures. The effects of strain rate on the indentation hardness were first investigated. Then yield stress of nanosilver sintered joint was studied in...
journal article 2019
document
Liu, P. (author)
Solid State Lighting (SSL) develops towards small size, high lumen output, high working temperature, and multi-functional applications. These trends are more desirable in miniaturized LED applications such as retrofit G4 LED devices. Retrofit G4 LEDs were chosen in this work as a technical carrier due to the miniaturized size challenge and high...
doctoral thesis 2019
document
Liu, Mengyao (author), Lin, Jintai (author), Folkert Boersma, K. (author), Pinardi, Gaia (author), Wang, Yang (author), Chimot, J.J. (author), Wagner, Thomas (author), Xie, Pinhua (author), Eskes, Henk (author), More Authors (author)
pollution and impact evaluation. For regions with high aerosol loadings, the retrieval accuracy is greatly affected by whether aerosol optical effects are treated implicitly (as additional effective clouds)...
journal article 2019
document
Liu, Y. (author), Zhang, H. (author), Wang, Lingen (author), Fan, Xuejun (author), Zhang, G.Q. (author), Sun, Fenglian (author)
Purpose: Crack and stress distribution on dies are key issues for the pressure-assisted sintering bonding of power modules. The purpose of this research is to build a relationship among stress distributions, sintering sequences and sintering pressures during the sintering processes. Design/methodology/approach: Three sintering sequences, S(a)...
journal article 2019
document
Liu, K. (author), Ma, M. (author), Wu, Longfei (author), Valenti, M. (author), Cardenas-Morcoso, Drialys (author), Hofmann, Jan P. (author), Bisquert, Juan (author), Gimenez, Sixto (author), Smith, W.A. (author)
was investigated. The uniform planar morphology served as a platform to evaluate the electronic effect isolated from morphological effects while minimizing...
journal article 2019
document
Josa-Culleré, Laia (author), Lahdenperä, Antti S.K. (author), Ribaucourt, Aubert (author), Höfler, G.T. (author), Gargiulo, S. (author), Liu, Yuan Yang (author), Paradisi, Francesca (author), Hollmann, F. (author), Paul, C.E. (author), More Authors (author)
Redox reactions catalyzed by highly selective nicotinamide-dependent oxidoreductases are rising to prominence in industry. The cost of nicotinamide adenine dinucleotide coenzymes has led to the use of well-established elaborate regeneration systems and more recently alternative synthetic biomimetic cofactors. These biomimetics are highly...
journal article 2019
document
Zhang, Chi (author), Tang, Qiuhong (author), Chen, Deliang (author), van der Ent, R.J. (author), Liu, Xingcai (author), Li, Wenhong (author), Haile, Gebremedhin Gebremeskel (author)
Precipitation on the Tibetan Plateau (TP) showed different spatial changes during 1979-2016, with an increasing trend over the northern Tibetan Plateau (NTP) and a slightly negative trend over the southern Tibetan Plateau (STP). The changes in precipitation moisture sources over the NTP and STP are investigated using the improved Water...
journal article 2019
document
Kan, Xingan (David) (author), Xiao, L. (author), Liu, Hao (author), Wang, M. (author), Schakel, W.J. (author), Lu, Xiao-Yun (author), van Arem, B. (author), Shladover, SE (author), Ferlis, Robert A. (author)
Realistic microscopic traffic simulation is essential for prospective evaluation of the potential impacts of new traffic control strategies. Freeway corridors with interacting bottlenecks and dedicated lanes generate complex traffic flow phenomena and congestion patterns, which are difficult to reproduce with existing microscopic simulation...
journal article 2019
document
Zegard, A. (author), Smal, L. (author), Naus, R. (author), Apostolidis, P. (author), Liu, X. (author), van de Ven, Martin (author), Erkens, Sandra (author), Scarpas, Athanasios (author)
The addition of epoxy modifier in bitumen is a relatively new modification technology (1-4) and the most critical epoxy polymerization-induced changes of the epoxy-bituminous materials are not fully understood. Different phenomena take place when epoxy modifiers are incorporated into bitumen and they are dependent on the material hardening...
conference paper 2019
document
Apostolidis, P. (author), Daniel, Gerald C. (author), Liu, X. (author), Erkens, Sandra (author), Scarpas, Athanasios (author)
The utilization of synthetic fibers has been reported in the past (1-8) showing enhancement of fatigue and thermal cracking resistance in asphaltic materials. However, the limited evidences about the benefits of these fibres in asphaltic materials at low material scales have been noticed. Also, the exact reinforcing mechanism of binding system...
conference paper 2019
document
Apostolidis, P. (author), Liu, X. (author), Zhang, M (author), van de Ven, Martin (author), Erkens, Sandra (author), Scarpas, Athanasios (author)
The addition of epoxy modifier in bitumen is a relatively new modification technology (1-4) and the most critical epoxy polymerization-induced changes of the epoxy-bituminous materials are not fully understood. Different phenomena take place when epoxy modifiers are incorporated into bitumen and they are dependent on the material hardening...
conference paper 2019
document
Apostolidis, P. (author), Liu, X. (author), Daniel, Gerald C. (author), Erkens, Sandra (author), Scarpas, Athanasios (author)
The utilisation of synthetic fibres has been reported in the past showing enhancement of fatigue and thermal cracking resistance in asphaltic materials. However, the limited evidences about the benefits of these fibres in asphaltic materials at low material scales have been noticed. Also, the exact reinforcing mechanism of binding system in the...
journal article 2019
document
Chen, Y. (author), Liu, Yao-Hong (author), Zong, Z. (author), Dijkhuis, Johan (author), Dolmans, Guido (author), Staszewski, R.B. (author), Babaie, M. (author)
In this paper, we propose a method to suppress supply pushing of an LC oscillator such that it may directly operate from a switched-mode dc-dc converter generating fairly large ripples. A ripple replication block (RRB) generates an amplified ripple replica at the gate terminal of the tail current source to stabilize the oscillator's tail...
journal article 2019
document
Wang, Y. (author), Lovrak, M. (author), Liu, Q. (author), Maity, C. (author), le Sage, V.A.A. (author), Guo, Xuhong (author), Eelkema, R. (author), van Esch, J.H. (author)
Hierarchical compartmentalization through the bottom-up approach is ubiquitous in living cells but remains a formidable task in synthetic systems. Here we report on hierarchically compartmentalized supramolecular gels that are spontaneously formed by multilevel self-sorting. Two types of molecular gelators are formed in situ from...
journal article 2019
document
Zhang, H. (author), Liu, Y. (author), Wang, Lingen (author), Sun, Fenglian (author), Fan, Jiajie (author), Placette, Mark D. (author), Fan, Xuejun (author), Zhang, G.Q. (author)
Modern power electronics has the increased demands in current density and high-temperature reliability. However, these performance factors are limited due to the die attach materials used to affix power dies microchips to electric circuitry. Although several die attach materials and methods exist, nanosilver sintering technology has received...
journal article 2019
document
Liu, Liu (author), Zlatanova, S. (author), Li, Bofeng (author), van Oosterom, P.J.M. (author), Liu, Hua (author), Barton, Jack (author)
An indoor logical network qualitatively represents abstract relationships between indoor spaces, and it can be used for path computation. In this paper, we concentrate on the logical network that does not have notions for metrics. Instead, it relies on the semantics and properties of indoor spaces. A navigation path can be computed by...
journal article 2019
document
Liu, M. (author), Wang, M. (author), Hoogendoorn, S.P. (author)
Cooperative (automated) vehicles have the potential to enhance traffic efficiency and fuel economy on urban roads, especially at signalized intersections. An optimal control approach to optimize the trajectories of cooperative vehicles at fixed-timing signalized intersections along an arterial is presented. The proposed approach aims to...
journal article 2019
document
Zhang, Zhixia (author), Zhang, Long (author), Yan, Xinlin (author), Wang, Hongqiang (author), Liu, Yanyan (author), Yu, C. (author), Cao, Xiaoting (author), van Eijck, L. (author), Wen, Bin (author)
Br as solid electrolyte synthesized by a facile solid-state sintering. Different from other O-incorporated sulfides,...
journal article 2019
Searched for:
(1 - 20 of 508)

Pages