Micromechanics-based viscoelasticity predictions of crumb rubber modified bitumen considering polymer network effects

Crumb rubber modified bitumen (CRMB) can be regarded as a binary composite system in which swollen rubber particles are embedded in the bitumen matrix. Previous study has successfully implemented the micromechanics models in predicting the complex moduli of CRMB binders using more representative constituent parameters. In the regime of master...

Effect of Bio-oil on Rheology and Chemistry of Organosolv Lignin–Modified Bitumen

Lignin, one of the most abundant natural polymers, has been extensively studied as an additive in bituminous binders. Even though the lignin improves the overall resistance against oxidative aging of bitumen, it could lead to high thermal cracking sensitivity. In this study, a bio-oil (i.e., rapeseed oil) is implemented in lignin-modified...

Micromechanics-based complex modulus prediction of crumb rubber modified bitumen considering interparticle interactions

Crumb rubber modified bitumen (CRMB) can be regarded as a binary composite system in which swollen rubber particles are embedded in the bitumen matrix. The current study aims to further improve the prediction accuracy of micromechanical models for CRMB by considering the interparticle interactions. To accomplish this goal, two different...

Thermal aging behaviors of the waste tire rubber used in bitumen modification

Considering the application scenarios of rubber granules from waste tires in the bitumen modification process (wet or dry process), both aerobic and anaerobic aging of rubber may occur. The current study aims to investigate the thermal aging behavior of waste tire rubber samples using nanoindentation and environment scanning electron microscopy ...

Effect of bio-oil on low-intermediate temperature properties of organosolv lignin-bitumen

Lignin, one of the most abundant natural polymers, has been extensively studied as liquid or solid additive in bituminous binders. Despite the fact the organosolv lignin in bitumen improves the overall resistance against oxidative aging, lignin could lead to binders of high thermal cracking sensitivity. In this study, a bio-based oil is...

Evaluation of Organosolv Lignin as an Oxidation Inhibitor in Bitumen

Organosolv lignin, a natural polymer, has been used in this study as an oxidation inhibitor in bitumen. Particularly, the effect of oxidative aging on the chemical compositional changes and on the rheology of bituminous binders with organosolv lignin and the impact to inhibit oxidation in bitumen were evaluated. Firstly, after analyzing the...

Microwave heating simulation of asphalt pavements

Microwave heating is a promising heating technology for the maintenance, recycling and deicing of pavement structures. Many experimental studies have been conducted to investigate the microwave heating properties of asphalt mixtures in the laboratory. However, very few studies investigated the application of microwave heating on asphalt...

Oxidation simulation of thin bitumen film

Oxidative aging is a complex phenomenon in bitumen and its fundamental understanding is needed to optimize paving materials with long-lasting characteristics. This research reports on a diffuse-reaction model for predicting the oxidation of bituminous binders over time and under different conditions. As known, the oxidation of bitumen is...

Preliminary study on using lignin as aging inhibitor in bitumen

During oxidative aging, oxygen reacts with active molecules present in bitumen producing polar compounds, principally ketones and sulfoxides, and increasing in the portion of asphaltenes. In general, oxidation reactions in bitumen yields to change its generic chemical composition and finally its colloidal structure deteriorating the physico...

Dissolution simulation of polymers in bitumen

Fundamental models should be developed and utilized in order to facilitate the chemo-mechanical design of modified binder systems for paving applications but not only. Especially, the fact that the incorporation of new chemical substances used as bio-based modifiers or alternative binders is attracting great interest to replace traditional...

Micromechanical modelling of complex shear modulus of crumb rubber modified bitumen

Crumb rubber modified bitumen (CRMB) can be considered as a binary composite system where rubber particles are embedded in the bitumen matrix. The bitumen-rubber interaction process (mainly swelling) significantly changes the mechanical properties of both bitumen and rubber phases. This study aims to predict the complex moduli of CRMB binders...

Chemical and Oxidative Controlled Hardening of Epoxy-Modified Bitumen

The addition of epoxy modifier in bitumen is a relatively new modification technology (1-4) and the most critical epoxy polymerization-induced changes of the epoxy-bituminous materials are not fully understood. Different phenomena take place when epoxy modifiers are incorporated into bitumen and they are dependent on the material hardening...

Asphalt-rubber interaction and performance evaluation of rubberised asphalt binders containing non-foaming warm-mix additives

Warm mix asphalt (WMA) technology has been increasingly utilised in rubberised asphalt pavements to reduce the production and compaction temperatures and the incidental fumes and odours. This study aims to investigate the high, intermediate and low-temperature performance of crumb rubber modified asphalt binders containing WMA additives. The...