Searched for:
(1 - 20 of 29)

Pages

document
Chen, Y. (author), Li, Z. (author), Chaves Figueiredo, S. (author), Copuroglu, Oguzhan (author), Veer, F.A. (author), Schlangen, E. (author)
The goal of this study is to investigate the effects of different grades of calcined clay on the extrudability and early-age strength development under ambient conditions. Four mix designs were proposed. Three of them contained high, medium, and low grades of calcined clay, respectively, and one was the reference without calcined clay. In terms...
journal article 2019
document
Li, Z. (author), Zhang, S. (author), Zuo, Y. (author), Chen, Wei (author), Ye, G. (author)
Chemical deformation (chemical shrinkage/expansion), the absolute volume change during reactions, is a key parameter influencing the volume stability, especially the autogenous deformation of a binder material. This work, for the first time, reports an in-depth investigation on the chemical deformation of metakaolin based geopolymer (MKG)....
journal article 2019
document
Chen, Z. (author), Wang, Li jun (author), Du, Xiao jia (author), Sun, Zai hong (author), Li, Fu shen (author), Chou, Kuo Chih (author)
A commercial solid oxide fuel cell with a Ni/YSZ anode was characterized under a pure methane atmosphere. The amount of deposited carbon increased with an increase in temperature but decreased when the temperature exceeded 700°C. The reactivity of carbon decreased with increasing deposition temperature. Filamentous carbon was deposited from...
journal article 2019
document
Zhang, Chi (author), Tang, Qiuhong (author), Chen, Deliang (author), van der Ent, R.J. (author), Liu, Xingcai (author), Li, Wenhong (author), Haile, Gebremedhin Gebremeskel (author)
Precipitation on the Tibetan Plateau (TP) showed different spatial changes during 1979-2016, with an increasing trend over the northern Tibetan Plateau (NTP) and a slightly negative trend over the southern Tibetan Plateau (STP). The changes in precipitation moisture sources over the NTP and STP are investigated using the improved Water...
journal article 2019
document
Shan, Xinmeng (author), Wen, Jiahong (author), Zhang, Min (author), Wang, Luyang (author), Ke, Q. (author), Li, Weijiang (author), Du, Shiqiang (author), Shi, Yong (author), Chen, Kun (author), More Authors (author)
Extreme flooding usually causes huge losses of residential buildings and household properties, which is critical to flood risk analysis and flood resilience building in Shanghai. We developed a scenario-based multidisciplinary approach to analyze the exposure, losses and risks of residential buildings and household properties, and their...
journal article 2019
document
Zhang, Jian (author), Sokolovskij, R. (author), Chen, Ganhui (author), Zhu, Yumeng (author), Qi, Yongle (author), Lin, Xinpeng (author), Li, Wenmao (author), Zhang, G. (author), Jiang, Yu-Long (author), Yu, Hongyu (author)
S exposure in dry air. A pre...
journal article 2019
document
Li, Z. (author), Nedeljković, Marija (author), Chen, B. (author), Ye, G. (author)
This study investigates the effectiveness of metakaolin (MK)in mitigating the autogenous shrinkage of alkali-activated slag (AAS). It is found that the autogenous shrinkage of AAS paste can be reduced by 40% and 50% when replacing 10% and 20% slag with MK, respectively. By providing additional Si and Al, and decreasing the pH of the pore...
journal article 2019
document
Chen, Hui (author), Ni, Yan (author), Li, Yulong (author), Liu, Xue-feng (author), Ou, Suying (author), Su, Min (author), Peng, Yisheng (author), Hu, Zhan (author), Uijttewaal, W.S.J. (author), Suzuki, T. (author)
), which are directly related to the wave damping capacity of a certain vegetated area. One major uncertainty is...
journal article 2018
document
Yang, Yang (author), Li, Diquan (author), Tong, Tiegang (author), Zhang, D. (author), Zhou, Yatong (author), Chen, Yangkang (author)
Strong noise is one of the toughest problems in the controlled-source electromagnetic (CSEM) method, which highly affects the quality of recorded data. The three main types of noise existing in CSEM data are periodic noise, Gaussian white noise, and nonperiodic noise, among which the nonperiodic noise is thought to be the most difficult to...
journal article 2018
document
Zhou, Yatong (author), Li, Shuhua (author), Zhang, D. (author), Chen, Yangkang (author)
We propose a new low-rank based noise attenuation method using an efficient algorithm for tracking subspaces from highly corrupted seismic observations. The subspace tracking algorithm requires only basic linear algebraic manipulations. The algorithm is derived by analysing incremental gradient descent on the Grassmannian manifold of...
journal article 2018
document
Li, Yonggang (author), Chen, Ziliang (author), Wen, Sheng (author), Hou, Xiaolin (author), Ma, Meihu (author)
A modified QuEChERS (quick, easy, cheap, effective, rugged, and safe) method and ultrahigh-performance liquid chromatography coupled to tandem mass spectrometry (UHPLC-MS/MS) were optimized and validated for 16 antibiotics belonging to three families (macrolides, quinolones, and sulfonamides) that were found in preserved eggs. Samples were...
journal article 2018
document
Yang, Z. (author), Boogaard, M.A. (author), Chen, Rong (author), Dollevoet, R.P.B.J. (author), Li, Z. (author)
This paper presents an analysis of the transient contact solutions of wheel-rail frictional rolling impacts calculated by an explicit finite element model of the wheel-insulated rail joint (IRJ) dynamic interaction. The ability of the model to simulate the dynamic behavior of an IRJ has been validated against a comprehensive field measurement in...
journal article 2018
document
Li, Z. (author), Ganapathy, S. (author), Xu, Y. (author), Zhu, Quanyao (author), Chen, Wen (author), Kochetkov, A (author), George, C. (author), Nazar, Linda F. (author), Wagemaker, M. (author)
journal article 2018
document
Li, Bin (author), Jiang, Peng (author), Zhai, Famin (author), Chen, Junhong (author), Bei, G. (author), Hou, Xinmei (author), Chou, Kuo Chih (author)
-SiC phase leads to the shrinkage of the SiC lattice due to the substitution of Si atoms (0.134 nm radius) by smaller B atoms (0.095 nm radius). The presence of B in the SiC...
journal article 2018
document
Liu, Jikai (author), Gaynor, Andrew T. (author), Chen, Shikui (author), Kang, Zhan (author), Suresh, Krishnan (author), Takezawa, Akihiro (author), Li, Lei (author), Kato, Junji (author), Tang, Jinyuan (author), Wang, C.C. (author), Cheng, Lin (author), Liang, Xuan (author), To, Albert. C. (author)
Manufacturing-oriented topology optimization has been extensively studied the past two decades, in particular for the conventional manufacturing methods, for example, machining and injection molding or casting. Both design and manufacturing engineers have benefited from these efforts because of the close-to-optimal and friendly-to-manufacture...
journal article 2018
document
Lin, Yu-Fen (author), Chen, Banjamin P. (author), Li, Wende (author), Perko, Z. (author), Wang, Yi (author), Testa, Mauro (author), Robert, Schneider (author), Lu, Hsaio-Ming (author), Gerweck, Leo E. (author)
Purpose: Variations in the radiosensitivity of tumor cells within and between tumors impact tumor response to radiation, including the dose required to achieve permanent local tumor control. The increased expression of DNA-PKcs, a key component of a major DNA damage repair pathway in tumors treated by radiation, suggests that DNA-PKcs– dependent...
journal article 2018
document
Wu, Yue (author), Liu, Xiuming (author), Li, Q. (author), Chen, Boxuan (author), Luo, Peng (author), Pronk, Arno (author), Mergny, Elke (author)
By using inflatable moulds and then spraying cellulose-water mixture, one ice dome and two ice towers were built in Harbin in December 2016. During the whole process, form-finding of the inflatable moulds as well as the construction of these ice composite shell structures are very important for the final results.
The mould for the ice dome...
conference paper 2017
document
Chen, Zhi Guo (author), Chen, R. Y. (author), Zhong, R. D. (author), Schneeloch, John (author), Zhang, C. (author), Huang, Y. (author), Qu, F. (author), Li, Q. (author), Gu, G. D. (author), Wang, N. L. (author)
Three-dimensional topological insulators (3D TIs) represent states of quantum matters in which surface states are protected by timereversal symmetry and an inversion occurs between bulk conduction and valence bands. However, the bulk-band inversion, which is intimately tied to the topologically nontrivial nature of 3D Tis, has rarely been...
journal article 2017
document
Wang, H. (author), Chen, Chuyi (author), Qu, B. (author), Li, Daqing (author)
The participation of individuals in multi-layer networks allows for feedback between network layers, opening new possibilities to mitigate epidemic spreading. For instance, the spread of a biological disease such as Ebola in a physical contact network may trigger the propagation of the information related to this disease in a communication...
journal article 2017
document
Li, Z. (author), Ganapathy, S. (author), Xu, Y. (author), Heringa, J.R. (author), Zhu, Quanyao (author), Chen, Wen (author), Wagemaker, M. (author)
The lithium air, or Li–O2, battery system is a promising electrochemical energy storage system because of its very high theoretical specific energy, as required by automotive applications. Fundamental research has resulted in much progress in mitigating detrimental (electro)chemical processes; however, the detailed structural evolution of the...
journal article 2017
Searched for:
(1 - 20 of 29)

Pages