Overtopping Flow Impact on a Vertical Wall on a Dike Crest

In this paper the impact process and mechanism of overtopping flow on a vertical wall on a dike crest are investigated by means of a series of physical model tests. A double-peaked force was recognized in a time series of an overtoping flow. Four stages were summarized for the whole overtopping flow impact process. An empirical relationship...

Experimental study of spray from wave impact

Overtopping plumes from wave impact is relevant to coastal defence for overtopping analysis of sea walls, levees, and gates. Improved insight into this phenomenon will further enhance the prediction of wave overtopping and its induced hazard, e.g., erosion, saltwater ingress, and a hindrance to traffic. A series of small-scale experiments have...

Walowa (Wave Loads on Walls): Large-Scale Experiments in the Delta Flume

Overtopping wave loads on vertical structures on top of a dike have been investigated in several small scale experiments in the past. A large-scale validation for a mild foreshore situation is still missing. Hence the WALOWA experimental campaign was carried out to address this topic. In the present paper the objectives of the WALOWA project are...

Non-Repeatability, Scale- and Model Effects in Laboratory Measurement of Impact Loads Induced by an Overtopped Bore on a Dike Mounted Wall

Overtopping bore impact forces on a dike mounted vertical wall were measured in similar large-scale (Froude length scale factor 1-to-4.3) and small-scale (Froude length scale factor 1-to-25) models. The differences due to scale effects were studied, by comparing the up-scaled force measurements from both models in prototype. It was noted that if...