Searched for:
(1 - 20 of 69)

Pages

document
Derelioglu, Z. (author), Ponnusami, S.A. (author), Turteltaub, S. (author), Van der Zwaag, S. (author), Sloof, W.G. (author)
Crack healing in ceramic thermal barrier coatings (TBCs) may be realized by embedding Mo-Si based particles in the thermal barrier coating. Upon cracking, these particles are exposed to oxygen that permeates through the top layer and the crack gap is filled with SiO2 which is produced from oxidation at high temperature. Due to its amorphous...
conference paper 2013
document
Hand, R.J. (author), Field, J.E. (author), Van der Zwaag, S. (author)
conference paper 1989
document
Prajer, M. (author), Wu, X. (author), Garcia Espallargas, S.J. (author), Van der Zwaag, S. (author)
Polymers reinforced with high performance fibres are successfully replacing metal alloys in lightweight aircraft structures. A critical factor in structural design is the resistance of a structure to progressive damage which develops during its service time. The brittle nature of matrix cracking is the main source of composite failure initiating...
conference paper 2013
document
Baldi, A. (author), Grande, A.M. (author), Bose, R.K. (author), Airoldi, A. (author), Garcia Espallargas, S.J. (author), Di Liandro, L. (author), Van der Zwaag, S. (author)
Several polymeric systems with intrinsic Self-Healing (SH) capabilities have been reported in literature. Many of them showed healing upon contact across the crack interface. Different parameters such as contact time, temperature, pressure or chemical activity determine the degree of healing obtained. In this work, a numerical simulation of the...
conference paper 2013
document
Carabat, A.L. (author), Van der Zwaag, S. (author), Sloof, W.G. (author)
Easy crack propagation in oxide ceramic coatings limits their application in high temperature environment (e.g. such as engines and gas turbine components) [1]. In order to overcome this problem, incorporation of sacrificial particles into an oxide ceramic coating may be a viable option. Particles of silicon compounds, such as: Si3N4, SiC, MoSi2...
conference paper 2013
document
Vega Vega, J.M. (author), Van der Zwaag, S. (author), Garcia Espallargas, S.J. (author)
Poly(ethylene-co-methacrylic acid) (EMAA) ionomers have shown healing capabilities in both ballistic and static tests. In previous studies it was shown that the degree of crosslinking (clusters) affects (positively or negatively) the healing under impact tests. Moreover, it has also been reported that the modification of the ionomers by...
conference paper 2013
document
Javierre, E. (author), Vuik, C. (author), Vermolen, F.J. (author), Segal, A. (author), Van der Zwaag, S. (author)
In thermal processing of alloys, homogenization of the as-cast microstructure by annealing at such a high temperature that unwanted precipitates are fully dissolved, is required to obtain a microstructure suited to undergo heavy plastic deformation. This process is governed by Fickian diffusion and can be modelled as a Stefan problem. In binary...
conference paper 2006
document
Kötteritzsch, J. (author), Hager, M.D. (author), Schubert, U.S. (author), Bose, R.K. (author), Garcia Espallargas, S.J. (author), Van der Zwaag, S. (author)
Because of its thermal reversibility, the retro-Diels-Alder (RDA) reaction represents an appealing possibility to produce self-healing polymers with well-defined architectures and tunable properties [1]. However, the polymer architecture for which the Diels-Alder (DA) reaction can best be used to contribute to the healing process is still not...
conference paper 2013
document
Zhang, S. (author), Langelaan, G. (author), Schut, H. (author), Brück, E. (author), Van der Zwaag, S. (author), Van Dijk, N.H. (author)
Steels are among the most widely used construction materials as their mechanical properties can be tuned over a very wide range of desired combinations of strength formability and other properties. However, when exposed for long times to high temperatures steel components can exhibit premature and low-ductility creep fracture, which arises from...
conference paper 2013
document
Duan, X. (author), Jia, D. (author), Yang, Z. (author), Zhou, Y. (author), Ouyang, J. (author), Sloof, W.G. (author), Van der Zwaag, S. (author)
Abstract only.
conference paper 2013
document
Shen, L. (author), Li, S.B. (author), Van der Zwaag, S. (author), Sloof, W.G. (author)
The oxidation crack healing of Cr2AlC and Cr2(Al,Si)C was studied and compared with known healing of Ti2AlC. The oxidation induced crack healing of Ti2AlC is relatively fast and leads to full strength recovery, but the oxidation product contains besides ?-Al2O3 also undesired TiO2. However, when oxidizing Cr2AlC only ?-Al2O3 is formed, but full...
conference paper 2013
document
Li, S.B. (author), Xiao, L.O. (author), Song, G.M. (author), Wu, X.M. (author), Sloof, W.G. (author), Van der Zwaag, S. (author)
conference paper 2011
document
AbdolahZadeh, M. (author), Esteves, A.C.C. (author), Van der Zwaag, S. (author), Garcia Espallargas, S.J. (author)
Sol-gel technology is increasingly being used in coatings for corrosion protection and adhesion improvement. So far, the self-healing concept in sol-gel coatings has only been approached from extrinsic healing perspective (i.e. use of nano and micro carriers of corrosion inhibitors) [1]. Despite the benefits of this approach, the damaged area...
conference paper 2013
document
Lafont, U. (author), Van Zeijl, H.W. (author), Van der Zwaag, S. (author)
conference paper 2011
document
Kop, T.A. (author), Sietsma, J. (author), Van der Zwaag, S. (author)
conference paper 1997
document
Van Dijk, N.H. (author), He, S. (author), Paladugu, M. (author), Schut, H. (author), Van der Zwaag, S. (author)
conference paper 2011
document
Sloof, W.G. (author), Li, S. (author), Song, G. (author), Kwakernaak, C. (author), Wu, X. (author), Van der Zwaag, S. (author)
conference paper 2011
document
Bode, S. (author), Bose, R. (author), Sandmann, B. (author), Hager, M.D. (author), Garcia, S.J. (author), Van der Zwaag, S. (author), Schubert, U.S. (author)
In the last decade several intrinsic self-healing materials have been developed in which the healing mechanism was mainly based on the reversibility of a certain structural element. For this purpose, reversible covalent bonds, e.g., based on the Diels-Alder reaction or weaker non-covalent interactions, e.g., hydrogen bonding, ionic interactions...
conference paper 2013
document
Baldi, A. (author), Grande, A.M. (author), Bose, R.K. (author), Airoldi, A. (author), Garcia Espallargas, S.J. (author), Di Landro, L. (author), Van der Zwaag, S. (author)
Several polymeric systems with intrinsic Self-Healing (SH) capabilities have been reported in literature. Many of them showed healing upon contact across the crack interface. Different parameters such as contact time, temperature, pressure or chemical activity determine the degree of healing obtained. In this work, a numerical simulation of the...
conference paper 2013
document
Vermolen, F. (author), Vuik, K. (author), Van der Zwaag, S. (author)
conference paper 1997
Searched for:
(1 - 20 of 69)

Pages