Shear and punching capacity predictions for slabs under concentrated loads aided by lefea

One-way slabs under concentrated loads may fail by one-way shear, punching, flexure or a mixed-mode between them. This study examines the benefits of using Linear Elastic Finite Element Analyses (LEFEA) combined with analytical expressions to predict the shear and punching capacities of such slabs. Besides, the determination of the most...

Punching capacity of spread footings using aci 318-19 and the strip model

In design, the sectional depth of reinforced concrete spread footings is usually governed by design code provisions for punching shear, which are derived primarily from experiments on slab-column connections. Previous experiments have shown that the punching behavior of concentrically loaded spread footings differs from that of slab-column...

Predicting the shear capacity of reinforced concrete slabs subjected to concentrated loads close to supports with the modified bond model

The shear problem is typically studied by testing small, heavily reinforced, slender beams subjected to concentrated loads, resulting in a beam shear failure, or by testing slab-column connections, resulting in a punching shear failure. Slabs subjected to concentrated loads close to supports, as occurring when truck loads are placed on slab...

Punching shear strength of transversely prestressed concrete decks

In the Netherlands, there is a need to determine the capacity of bridge decks as a large number of them were built back in the 60’s and 70’s. Since then, not only a lot of additional safety requirements have been incorporated into the modern codes but the traffic flow has also increased drastically. The current research deals with this question...