Searched for:
(1 - 20 of 204)

Pages

document
Ge, W. (author), Jiao, Yutie (author), Sun, Heqiang (author), Li, Zongkun (author), Zhang, Hexiang (author), Zheng, Yan (author), Guo, Xinyan (author), Zhang, Zhaosheng (author), van Gelder, P.H.A.J.M. (author)
Dam breach has catastrophic consequences for human lives and economy. In previous studies, empirical models are often, to a limited extent, due to the inadequacy of historical dam breach events. Physical models, which focus on simulating human behavior during floods, are not suitable for fast analysis of a large number of dams due to the...
journal article 2019
document
Huynh, Nathan (author), Smith, Daniel (author), van Duin, J.H.R. (author), Dulebenets, Maxim (author), Sun, Yansuhuo (author), Schonfeld, Paul (author), Hutson, Nathan (author), Sauri, Sergi (author), Dau-Ngo, Theresa (author), Harder, Frank (author), Khankarli, Ghassan (author)
report 2019
document
Sun, J. (author), Blom, H.A.P. (author), Ellerbroek, J. (author), Hoekstra, J.M. (author)
This article investigates the estimation of aircraft mass and thrust settings of departing aircraft using a recursive Bayesian method called particle filtering. The method is based on a nonlinear state-space system derived from aircraft point-mass performance models. Using only aircraft surveillance data, flight states such as position,...
journal article 2019
document
Sun, J. (author)
A large number of stakeholders exist in the modern air traffic management ecosystem. Air transportation studies benefit from collaboration and the sharing of knowledge and findings between these different players. However, not all parties have equal access to information. Due to the lack of open-source tools and models, it is not always possible...
doctoral thesis 2019
document
Zhang, H. (author), Liu, Y. (author), Wang, Lingen (author), Sun, Fenglian (author), Fan, Xuejun (author), Zhang, G.Q. (author)
The nanoindentation test was conducted in this paper to investigate the indentation hardness, plasticity and initial creep properties of pressure sintered nanosilver joint at various test temperatures. The effects of strain rate on the indentation hardness were first investigated. Then yield stress of nanosilver sintered joint was studied in...
journal article 2019
document
Sun, Wenwen (author)
In Beijing’s old city, the emergence of conflictual practices in the street life have challenged the conventional concepts of ‘public’ and ‘private’, as well as the design principles based on this normative expression. This paper proposes a novel way of reading and understanding the street spaces by exploring a traditional type of street in...
abstract 2019
document
Zhang, Youyou (author), Mosallam, Ayman (author), Liu, Yuqing (author), Sun, Yun (author), Xin, H. (author), He, Jun (author)
In this study, flexural behaviors of the pultruded composite laminate were evaluated through experiments and theoretical analysis. Three-point flexural tests were performed for pultruded specimens. The typical failure mode for the longitudinal flexural specimens was local crush on the top surface accompanied with local cracks on the bottom...
journal article 2019
document
Chen, Z. (author), Wang, Li jun (author), Du, Xiao jia (author), Sun, Zai hong (author), Li, Fu shen (author), Chou, Kuo Chih (author)
A commercial solid oxide fuel cell with a Ni/YSZ anode was characterized under a pure methane atmosphere. The amount of deposited carbon increased with an increase in temperature but decreased when the temperature exceeded 700°C. The reactivity of carbon decreased with increasing deposition temperature. Filamentous carbon was deposited from...
journal article 2019
document
Liu, Y. (author), Zhang, H. (author), Wang, Lingen (author), Fan, Xuejun (author), Zhang, G.Q. (author), Sun, Fenglian (author)
Purpose: Crack and stress distribution on dies are key issues for the pressure-assisted sintering bonding of power modules. The purpose of this research is to build a relationship among stress distributions, sintering sequences and sintering pressures during the sintering processes. Design/methodology/approach: Three sintering sequences, S(a)...
journal article 2019
document
Filonenko, G.A. (author), Sun, D. (author), Weber, Manuela (author), Müller, Christian (author), Pidko, E.A. (author)
Photoluminescent compounds can undergo various structural changes upon interaction with light. When these changes manifest themselves in the excited state, the resulting emitters can obtain a sensory function. In this work, we designed coordination compounds that can vary their emission color in response to thermal and mechanical stimuli....
journal article 2019
document
Berghauser Pont, Meta (author), Stavroulaki, Gianna (author), Gil, Jorge (author), Marcus, Lars (author), Olsson, Jesper (author), Sun, Kailun (author), Serra, Miguel (author), Hausleitner, B. (author), Dhanani, Ashley (author), Legeby, Ann (author)
Typologies have always played an important role in urban planning and design practice and formal studies have been central to the field of urban morphology. These studies have predominantly been of a historical-qualitative nature and do not support quantitative comparisons between urban areas and between different cities, nor offer the precise...
journal article 2019
document
Dong, Xichao (author), Hu, Jiaqi (author), Hu, Cheng (author), Li, Y. (author), Sun, Shiyu (author)
The sub-satellite track of geosynchronous synthetic aperture radar (GEO SAR) presents the figure "8" or "O", which causes the great changes of platform motion direction and the different projection of anisotropic irregularities along the line-of-sight (LOS) direction. Due to the almost equal angle velocity to that of Earth, the GEO SAR has...
journal article 2019
document
Liping, Jing (author), Sun, L. (author), Zhu, K. (author), Zhu, Fengji (author)
Since the development of architectural disciplines, Dutch architectural style and architects have played important role in the world. In the wave of local urban renewal in the Netherlands, Dutch architects represented by Rem Koolhass, Francine Houben, Winy Maas and Kees Kaan and etc. have shown rich practices and experiences, therefore, the...
poster 2019
document
Zhu, Fengji (author), Sun, L. (author), Zhu, K. (author), Jing, Liping (author)
The educational space of Architecture faculty is used to cultivate architects. At the same time, it becomes the carrier of architectural ideas and teaching methods. The type of architecture and its spatial organization reflect the architectural education philosophy and attitude. Back in history, as early as the Renaissance, there had emerged...
conference paper 2019
document
Zha, Jingrong (author), Xie, Guoqi (author), Sun, L. (author)
Under the background of coordinated development between urban and rural areas, rural revival is a hot topic. The research focuses on the landscape spatial form under the Characteristic and Idyllic Village. From the perspective of rural experience, it uses settlement space and landscape space analysis method to construct the renewal strategy of...
journal article 2019
document
Sun, L. (author), Zhao, Pingping (author), Xu, Qingqing (author)
This paper reviews the development of New-Bud System, analyzes the humanistic connotation of“light-weight”comparing with Japanese architect Shigeru’s similar practices, and interprets New-Bud’s construction concept based on humanism and its “autonomic, evolving, derivative”systematic vitality. The concept and pursuit of“light-weight for...
journal article 2019
document
Sun, B. (author), Fan, J. (author), Fan, Xuejun (author), Zhang, G.Q. (author), Zhang, Guohao (author)
In this paper, a physics of failure-based prediction method is combined with statistical models to consider the impact of current crowding and current droop effects on the reliability of LED arrays. Electronic-thermal models of LEDs are utilized to obtain the operation conditions under the influences of current crowding and current droop. A...
journal article 2019
document
Zhang, H. (author), Liu, Y. (author), Wang, Lingen (author), Sun, Fenglian (author), Fan, Jiajie (author), Placette, Mark D. (author), Fan, Xuejun (author), Zhang, G.Q. (author)
Modern power electronics has the increased demands in current density and high-temperature reliability. However, these performance factors are limited due to the die attach materials used to affix power dies microchips to electric circuitry. Although several die attach materials and methods exist, nanosilver sintering technology has received...
journal article 2019
document
Sun, X. (author), Jansma, H. (author), Miyama, Toshihito (author), Sanjeewa Aluthge, Rasika Dasanayake (author), Shinmei, Kenichi (author), Yagihashi, Noritoshi (author), Nishiyama, Haruka (author), Osadchii, D. (author), van der Linden, B. (author), Makkee, M. (author)
Abstract: Mn and Li promoted Rh catalysts supported on SiO<sub>2</sub> with a thin TiO<sub>2</sub> layer were synthesized by stepwise incipient wetness impregnation approach. The thin TiO<sub>2</sub> layer on the surface of SiO<sub>2</sub> was proved to stabilize those small Rh nanoparticles and hinder their agglomeration. The reducibility of...
journal article 2019
document
Sun, Z. (author), Kasbergen, C. (author), Scarpas, A. (author), Anupam, K. (author), van Dalen, K.N. (author), Erkens, S.M.J.G. (author)
In order to design high-performance roadways, a robust tool which can compute the structural response caused by moving vehicles is necessary. Therefore, this paper proposes a spectral element method-based model to accurately and effectively predict the 3D dynamic response of layered systems under a moving load. A layer spectral element and a...
journal article 2019
Searched for:
(1 - 20 of 204)

Pages