Optical Simulation-Aided Design and Engineering of Monolithic Perovskite/Silicon Tandem Solar Cells

Monolithic perovskite/c-Si tandem solar cells have attracted enormous research attention and have achieved efficiencies above 30%. This work describes the development of monolithic tandem solar cells based on silicon heterojunction (SHJ) bottom- and perovskite top-cells and highlights light management techniques assisted by optical simulation...

Strategies for realizing high-efficiency silicon heterojunction solar cells

Silicon heterojunction (SHJ) solar cells have achieved a record efficiency of 26.81% in a front/back-contacted (FBC) configuration. Moreover, thanks to their advantageous high V_OC and good infrared response, SHJ solar cells can be further combined with wide bandgap perovskite cells forming tandem devices to enable efficiencies well...

Effects of (i)a-Si: H deposition temperature on high-efficiency silicon heterojunction solar cells

Excellent surface passivation induced by (i)a-Si:H is critical to achieve high-efficiency silicon heterojunction (SHJ) solar cells. This is key for conventional single-junction cell applications but also for bottom cell application in tandem devices. In this study, we investigated the effects of (i)a-Si:H deposition temperature on passivation...

Design and optimization of hole collectors based on nc-SiO_x:H for high-efficiency silicon heterojunction solar cells

Low activation energy (E_a) and wide bandgap (E_g) are essential for (p)-contacts to achieve effective hole collection in silicon heterojunction (SHJ) solar cells. In this work, we study Plasma-Enhanced Chemical Vapor Deposition p-type hydrogenated nanocrystalline silicon oxide, (p)nc-SiO_x:H, combined with (p)nc...

Ultra-thin electron collectors based on nc-Si:H for high-efficiency silicon heterojunction solar cells

Low parasitic absorption and high conductivity enable (n)-type hydrogenated nanocrystalline silicon [(n)nc-Si:H], eventually alloyed with oxygen [(n)nc-SiO_x:H], to be deployed as window layer in high-efficiency silicon heterojunction (SHJ) solar cells. Besides the appropriate opto-electrical properties of these nanocrystalline...

Doped hydrogenated nanocrystalline silicon oxide layers for high-efficiency c-Si heterojunction solar cells

Hydrogenated nanocrystalline silicon oxide (nc-SiO_x:H) layers exhibit promising optoelectrical properties for carrier-selective-contacts in silicon heterojunction (SHJ) solar cells. However, achieving high conductivity while preserving crystalline silicon (c-Si) passivation quality is technologically challenging for growing thin...

Poly-crystalline silicon-oxide films as carrier-selective passivating contacts for c-Si solar cells

The poly-Si carrier-selective passivating contacts (CSPCs) parasitically absorb a substantial amount of light, especially in the form of free carrier absorption. To minimize these losses, we developed CSPCs based on oxygen-alloyed poly-Si (poly-SiO_x) and deployed them in c-Si solar cells. Transmission electron microscopy analysis...

High-efficiency black IBC c-Si solar cells with poly-Si as carrier-selective passivating contacts

In this work, we present the application of poly-Si carrier-selective passivating contacts (CSPCs) as both polarities in interdigitated back-contacted (IBC) solar cell architectures. We compared two approaches to form a gap between the back-surface field (BSF) and emitter fingers. It is proved that the gaps prepared by both approaches are...

Poly-Si(O)x passivating contacts for high-efficiency c-Si IBC solar cells

Highest conversion efficiency in crystalline silicon (c-Si) solar cells can be enabled by quenching minority carriers' recombination at c-Si/contact interface owing to carrier-selective passivating contacts. With the semi-insulating poly-crystalline silicon (SIPOS, poly-Si) a very good passivation of c-Si surfaces was obtained. We have...