Searched for: +
(1 - 20 of 257)

Pages

document
Tao, Y. (author), Gao, D.W. (author), Wang, H.Y. (author), Zhang, X. (author), Ghasimi, S.M.D. (author), Ozgun, H. (author), Ersahin, M.E. (author), Zhou, Z.B. (author), Liu, G. (author), Temudo, M.F. (author), Kloek, J. (author), Spanjers, H. (author), De Kreuk, M.K. (author), Van Lier, J.B. (author)
conference paper 2014
document
Zhang, Jiyi (author), Li, Gang (author), Liu, Youzhi (author), Yin, Pengcheng (author), Yu, Jinyu (author), Shi, Zhifeng (author)
Since the introduction of the concept of 3D cadastre, a great many of significant research results have been done. To promote the development of 3D cadatre, 3D cadastre working group sponsored by International Federation Surveyors (FIG) commissions 3 and 7 was organized by Delft University of Technology in 2001. This working group provides a...
conference paper 2018
document
Zuo, Chenjia (author), Zhang, Yixiang (author), Tong, Yudong (author), Liu, Yanbo (author)
Synthetic fibers have been widely studied as reinforcing materials to increase the mechanical and durability properties of concrete. According to its diameter, fibers can be categorized as micro and macro (or coarse) fibers. As most research focuses on the mechanical properties of fiber reinforced concrete, its chloride permeability properties...
conference paper 2021
document
Nie, X. (author), Zhang, J. (author), Huang, H. (author), Liu, Z. (author), Lacasse, S. (author)
In the past few years, random field theory has been increasingly used to model the inherent soil variability. The scale of fluctuation is one of the important parameters describing a stationary random field. In this study, the factors affecting an accurate estimation of the scale of fluctuation were studied with numerical experiments to show how...
conference paper 2015
document
The behavior of particles in compressible turbulence has been seldom investigated to date despite its importance in many natural and industrial flows. Direct numerical simulations of particle-laden compressible isotropic turbulence are performed to study the preferential concentration of particles and the underling mechanisms. It turns out that...
conference paper 2015
document
Liu, Y.L. (author), Ortiz, Marco A. (author), Zhang, D. (author), Bluyssen, P.M. (author)
The airborne transmission of SARS-CoV-2 in educational buildings has raised concerns during the current COVID-19 pandemic. In this study, a portable fog generator system was designed and assembled to visualise the airflow pattern of exhaled droplets in a classroom. The system consists of five components: medium, fog generator, buffer, pump, and...
conference paper 2022
document
Wang, H. (author), Apostolidis, P. (author), Zhang, H. (author), Liu, X. (author), Erkens, S. (author), Scarpas, Athanasios (author)
Microwave heating is a promising heating technology for the maintenance, recycling and deicing of pavement structures. Many experimental studies have been conducted to investigate the microwave heating properties of asphalt mixtures in the laboratory. However, very few studies investigated the application of microwave heating on asphalt...
conference paper 2020
document
Apostolidis, P. (author), Wang, H. (author), Zhang, H. (author), Liu, X. (author), Erkens, S. (author), Scarpas, Athanasios (author)
Oxidative aging is a complex phenomenon in bitumen and its fundamental understanding is needed to optimize paving materials with long-lasting characteristics. This research reports on a diffuse-reaction model for predicting the oxidation of bituminous binders over time and under different conditions. As known, the oxidation of bitumen is...
conference paper 2020
document
Zhang, Y. (author), Liu, X. (author), Jing, R. (author), Apostolidis, P. (author), Erkens, S. (author), Scarpas, Athanasios (author)
During oxidative aging, oxygen reacts with active molecules present in bitumen producing polar compounds, principally ketones and sulfoxides, and increasing in the portion of asphaltenes. In general, oxidation reactions in bitumen yields to change its generic chemical composition and finally its colloidal structure deteriorating the physico...
conference paper 2020
document
Wang, H. (author), Apostolidis, P. (author), Zhang, H. (author), Liu, X. (author), Erkens, S. (author), Scarpas, Athanasios (author)
Fundamental models should be developed and utilized in order to facilitate the chemo-mechanical design of modified binder systems for paving applications but not only. Especially, the fact that the incorporation of new chemical substances used as bio-based modifiers or alternative binders is attracting great interest to replace traditional...
conference paper 2020
document
Apostolidis, P. (author), Liu, X. (author), Zhang, M (author), van de Ven, Martin (author), Erkens, S. (author), Scarpas, Athanasios (author)
The addition of epoxy modifier in bitumen is a relatively new modification technology (1-4) and the most critical epoxy polymerization-induced changes of the epoxy-bituminous materials are not fully understood. Different phenomena take place when epoxy modifiers are incorporated into bitumen and they are dependent on the material hardening...
conference paper 2019
document
Liu, Hexin (author), Perera, Leibny Paola Garcia (author), Zhang, Xinyi (author), Dauwels, J.H.G. (author), Khong, Andy W.H. (author), Khudanpur, Sanjeev (author), Styles, Suzy J. (author)
We propose two end-to-end neural configurations for language diarization on bilingual code-switching speech. The first, a BLSTM-E2E architecture, includes a set of stacked bidirectional LSTMs to compute embeddings and incorporates the deep clustering loss to enforce grouping of languages belonging to the same class. The second, an XSA-E2E...
conference paper 2021
document
Liu, Qilong (author), Breems, Lucien (author), Zhang, Chenming (author), Bajoria, Shagun (author), Bolatkale, M. (author), Rutten, Robert (author), Radulov, Georgi (author)
In the pursuit of ever larger bandwidths, in recent years GHz-rate continuous-time (CT) oversampled ADCs have been reported in literature that achieve bandwidths of hundreds of MHz and have even exceeded the GHz barrier [1]-[3]. As impressive as these bandwidths are for CT ADCs, the required ADC architectures are complex, are sensitive to...
conference paper 2022
document
Ji, X. (author), van Zeijl, H.W. (author), Romijn, J. (author), van Ginkel, H.J. (author), Liu, X. (author), Zhang, Kouchi (author)
The continuous trend to integrate more multi-functions in a package often involves, Heterogeneous Integration of multi-functional blocks in some kind of 3D stacking. The conventional flip chip for die-on-substrate technology applies solder for integration. However, solder joint integration has the disadvantages of restricting height, reflow...
conference paper 2022
document
Hong, H. (author), Ye, Li (author), Li, Ke (author), Sarro, Pasqualina M (author), Zhang, Kouchi (author), Liu, Zewen (author)
In this paper, we report a modified three step anisotropic wet etching (TSWE) method to fabricate solid-state silicon nanoslits. The slit-opening process is performed by <111> crystal plane etching. The etching rate of the <111> crystal plane is reasonably slow as it is only 1/45 of the <100> etching rate, thus allowing and...
conference paper 2021
document
Liu, Minne (author), Ibrahim, Mesfin S. (author), Wen, Minzhen (author), Li, Sheng (author), Wang, An (author), Zhang, Kouchi (author), Fan, J. (author)
Spectral power distribution (SPD) is the radiation power intensity at different wavelengths, containing the most basic photometric and colorimetric performance of the illuminant, which is able to predict the lifetime of LEDs. This paper proposes an SPD model assisted by machine learning algorithms to detect the early failure of white LEDs. The...
conference paper 2023
document
Ji, Liangzheng (author), Li, Zaihuan (author), Zhang, Kouchi (author), Zhang, Jing (author), Liu, Pan (author)
Micro LED displays offer superior performance compared to traditional LCD and OLED displays. However, challenges in transfer technology, such as high throughput and scalability, must be addressed. Among various mass transfer techniques, stamp transfer and laser-assisted transfer are widely used for Micro LED assembly. The laser-assisted transfer...
conference paper 2023
document
Wang, Xinyue (author), Zeng, Zejun (author), Zhang, Jing (author), Zhang, Kouchi (author), Liu, Pan (author)
With the increasing application of wide bandgap materials such as silicon carbide and gallium nitride in power devices, the working temperature of power devices has been pushed further. Therefore, it brings higher requirements for packaging materials. Sintered silver is a widely accepted chip connection material. However, silver suffers from...
conference paper 2022
document
Tan, C. (author), Wang, S. (author), Liu, X. (author), Jiang, Jing (author), Zhang, Kouchi (author), Ye, H. (author)
On the basis of the development and application requirements of flexible DC transmission techniques, a 1 kA/10 kV half-bridge IGBT press-pack module is studied. The module is composed of three subunits in series, and each subunit consists of IGBT chips in parallel. In order to solve the problem of chips failure caused by non-uniform rigid...
conference paper 2022
document
Li, Shizhen (author), Liu, X. (author), Jiang, Jing (author), Tan, C. (author), Gao, Chenshan (author), Liu, Yang (author), Ye, H. (author), Zhang, Kouchi (author)
Cu-Ag core-shell (CS) nanoparticle (NP) is considered as a cost-effective alternative material to nano silver sintering material in die attachment application. To further reduce the cost, the thickness of the Ag shell can be adjusted. Whereas the shell thickness will also affect the thermal stability of the Cu-Ag CSNPs. In this study, molecular...
conference paper 2022
Searched for: +
(1 - 20 of 257)

Pages