Searched for: +
(1 - 20 of 28)

Pages

document
Liu, Shurui (author), Lu, T. (author), Tang, Z. (author), Chen, Zhiyuan (author), Jiang, Junmin (author), Zhao, Bo (author), Du, S. (author)
In this article, we propose a reconfigurable regulating rectifier with a wide operational range for wireless power transfer. The proposed three-mode rectifier achieves a broad range voltage regulation without global loop control to minimize the chip area occupation. Compared with previous work, more working modes and greater voltage gain...
journal article 2023
document
Liu, Yuxuan (author), Eeltink, D. (author), Tang, Tianning (author), Barratt, D. (author), Li, Ye (author), Adcock, T. A.A. (author), van den Bremer, T.S. (author)
Wave breaking is the main mechanism that dissipates energy from ocean waves by wind. Its effects on the frequency spectrum cause a downshift of the spectral peak and dissipation of the total energy of the spectrum. Various reduced-form wave breaking models have been developed to capture wave breaking in envelope-based wave evolution equations...
journal article 2023
document
Li, Xiao (author), Tang, Jiuyang (author), Zhao, Jiayan (author), Li, Jinbing (author), Zhang, Kouchi (author), Liu, Pan (author)
With the development of 5G communication technology and the rise of power semiconductors, the switching frequency of the circuit keeps increasing, which pushes for miniaturization of power modules and related components. Therefore, in this paper, a one-step molding technology was proposed for a DC/DC buck converter power module. We proposed a...
conference paper 2022
document
Tang, Ruifan (author), De Donato, Lorenzo (author), Bešinović, Nikola (author), Flammini, Francesco (author), Goverde, R.M.P. (author), Lin, Zhiyuan (author), Liu, Ronghui (author), Tang, Tianli (author), Vittorini, Valeria (author), Wang, Z. (author)
Nowadays it is widely accepted that Artificial Intelligence (AI) is significantly influencing a large number of domains, including railways. In this paper, we present a systematic literature review of the current state-of-the-art of AI in railway transport. In particular, we analysed and discussed papers from a holistic railway perspective,...
review 2022
document
Yuan, Xiangyang (author), Cui, Endian (author), Liu, K. (author), Jiang, Ying (author), Yang, Xiaoyan (author), Tang, Jianfeng (author), Yang, Lu (author), Liao, Xiaoling (author), Zhao, Yanan (author)
In this work, different lanthanides (Tm<sup>3+</sup>, Er<sup>3+</sup>; Yb<sup>3+</sup>, Ho<sup>3+</sup>, Nd<sup>3+</sup>) were doped into NaYF<sub>4</sub> via a high-temperature coprecipitation method, and followed by SiO<sub>2</sub> coating to improve the water dispersibility, resulting in NaYF<sub>4</sub>:Tm<sup>3+</sup>, Er<sup>3+</sup>...
journal article 2022
document
Jiang, Qian (author), Ren, Feng (author), Wang, Chenglei (author), Wang, Zhaokun (author), Kefayati, Gholamreza (author), Kenjeres, S. (author), Vafai, Kambiz (author), Liu, Yang (author), Tang, Hui (author)
We developed a dedicated computational framework by coupling the lattice-Boltzmann-method (LBM) modeling and the particle-swarm-optimization (PSO) algorithm to search optimal strategies of magnetic nanoparticle (MNP) injection for hyperthermia-based cancer treatment. Two simplified tumor models were considered: a circular model representing...
journal article 2022
document
Hou, Shuhan (author), Wang, Zhaokun (author), Yang, Huiru (author), Jiang, Jing (author), Gao, Chenshan (author), Liu, Yufei (author), Tang, Xiaosheng (author), Ye, H. (author)
For the relevant properties of pristine and doped (Si, P, Se, Te, As) monolayer WS<sub>2</sub> before and after the adsorption of CO, CO<sub>2</sub>, N<sub>2</sub>, NO, NO<sub>2</sub> and O<sub>2</sub>, density functional theory (DFT) calculations are made. Calculation results reveal that the monolayer WS<sub>2</sub> doped with P and As atoms...
journal article 2022
document
Tian, Zhan (author), Yu, Ziwei (author), Li, Yifan (author), Ke, Q. (author), Liu, Junguo (author), Luo, Hongyan (author), Tang, Yingdong (author)
Climate change and rapid urbanization have made it difficult to predict the risk of pollution in cities under different types of rainfall. In this study, a data-driven approach to quantify the effects of rainfall characteristics on river pollution was proposed and applied in a case study of Shiyan River, Shenzhen, China. The results indicate...
journal article 2022
document
Yang, Huiru (author), Li, Junfeng (author), Shao, Ziyuan (author), Tan, C. (author), Gao, Chenshan (author), Cui, Hongyuan (author), Tang, Xiaosheng (author), Liu, Yufei (author), Zhang, Kouchi (author), Ye, H. (author)
The development of high-performance gas sensing materials is one of the development trends of new gas sensor technology. In this work, in order to predict the gas-sensitive characteristics of HfSe<sub>2</sub> and its potential as a gas-sensitive material, the interactions of nonmetallic element (O, S, Te) doped HfSe<sub>2</sub> monolayer and...
journal article 2022
document
Tang, Jiuyang (author), Li, Liangtao (author), Zhang, Kouchi (author), Zhang, Jing (author), Liu, Pan (author)
Ultrasonic wedge bonding of aluminum (Al) wires is a widely applied interconnect technology for power electronic packaging. The joint quality of the wedge bonding is mainly affected by the process parameters and material properties. Inappropriate process parameters will lead to failure modes such as chip surface pit, metal layer peeling off,...
journal article 2022
document
Ma, Bingtao (author), Liu, Hongsen (author), Nan, L. (author), Tang, Xu (author), Fan, Huijie (author), Cong, Yang (author)
The 3D mesh is an important representation of geometric data. It is widely used in computer graphics and has attracted more attention in computer vision community recently. However, in the generation of mesh data, geometric deficiencies (e.g., duplicate elements, degenerate faces, isolated vertices, self-intersection, and inner faces) are...
conference paper 2021
document
Liu, Zhihui (author), Wang, Li (author), Kong, Fanlei (author), Huang, Xia (author), Tang, Zhi (author), He, Shi (author), Vink, P. (author)
BACKGROUND: Many occupations require workers to stand for prolonged periods, which can cause discomfort, pain and even injures. Some supermarkets in life provide a foot pad for checkout staff to let them stand on it at work, thereby reducing standing fatigue caused by standing for a long time. The inclined platform is the same as the foot pad...
journal article 2021
document
Ran, Jiangjun (author), Ditmar, P.G. (author), Liu, Lin (author), Xiao, Yun (author), Klees, R. (author), Tang, Xueyuan (author)
Mascon products derived from Gravity Recovery and Climate Experiment satellite gravimetry data are widely used to study the Greenland ice sheet mass balance. However, the products released by different research groups—JPL, CSR, and GSFC—show noticeable discrepancies. To understand them, we compare those mascon products with mascon solutions...
journal article 2021
document
Liu, Yubo (author), Zhang, Chi (author), Tang, Qiuhong (author), Hosseini-Moghari, Seyed Mohammad (author), Haile, Gebremedhin Gebremeskel (author), Li, Laifang (author), Li, Wenhong (author), Yang, Kun (author), van der Ent, R.J. (author), Chen, Deliang (author)
Rainfall is one of the most influential climatic factors on regional development and environment, and changes in rainfall intensity are of specific concern. In the Huaihe River Valley (HRV), heavy rainfall is a primary trigger of floods. However, the difference in the origin of moisture contributed to heavy rainfall and light rainfall is...
journal article 2021
document
Li, Z. (author), Jiang, X. (author), Hopman, J.J. (author), Zhu, Ling (author), Liu, Z. (author), Tang, Weiguo (author)
Surface cracked steel plates reinforced with single-side Fiber-Reinforced Polymer (FRP) subjected to cyclic tension are experimental studied. The main purpose is to analyze the effect of FRP reinforcement on the crack growth. The failure modes and their effects are analyzed as well. Given the single-side reinforcement, reinforcing the cracked...
journal article 2020
document
Han, Rui (author), Liu, Chi Harold (author), Li, Shilin (author), Chen, Lydia Y. (author), Wang, Guoren (author), Tang, Jian (author), Ye, Jieping (author)
The core of many large-scale machine learning (ML) applications, such as neural networks (NN), support vector machine (SVM), and convolutional neural network (CNN), is the training algorithm that iteratively updates model parameters by processing massive datasets. From a plethora of studies aiming at accelerating ML, being data...
journal article 2019
document
Zhang, Chi (author), Tang, Qiuhong (author), Chen, Deliang (author), van der Ent, R.J. (author), Liu, Xingcai (author), Li, Wenhong (author), Haile, Gebremedhin Gebremeskel (author)
Precipitation on the Tibetan Plateau (TP) showed different spatial changes during 1979-2016, with an increasing trend over the northern Tibetan Plateau (NTP) and a slightly negative trend over the southern Tibetan Plateau (STP). The changes in precipitation moisture sources over the NTP and STP are investigated using the improved Water...
journal article 2019
document
Liu, Jikai (author), Gaynor, Andrew T. (author), Chen, Shikui (author), Kang, Zhan (author), Suresh, Krishnan (author), Takezawa, Akihiro (author), Li, Lei (author), Kato, Junji (author), Tang, Jinyuan (author), Wang, C.C. (author), Cheng, Lin (author), Liang, Xuan (author), To, Albert. C. (author)
Manufacturing-oriented topology optimization has been extensively studied the past two decades, in particular for the conventional manufacturing methods, for example, machining and injection molding or casting. Both design and manufacturing engineers have benefited from these efforts because of the close-to-optimal and friendly-to-manufacture...
journal article 2018
document
Liu, Jianguo (author), Beard, Matt (author), Isabella, O. (author), Tang, Jianxin (author)
The editors introduce the feature issue on “Energy, Light and the Environment (LEE) 2017”, which is based on the topics presented at a congress of the same name held in Boulder, CO, US, from November 6 to November 9. This feature issue presents 13 papers selected from the voluntary submissions by attendees who presented at the progress and...
review 2018
document
Xiahou, Xiaer (author), Yuan, Jingfeng (author), Liu, Y. (author), Tang, Yuchun (author), Li, Qiming (author)
Construction industrialization (CI) has been adopted worldwide because of its potential benefits. However, current research shows the incentives for adopting CI may differ in different regions. While the promotion of CI in China is still at the initial stage, a systematical analysis of the driving factors would help decision makers get a...
journal article 2018
Searched for: +
(1 - 20 of 28)

Pages