Searched for:
(1 - 20 of 374)

Pages

document
Zhao, Yuan (author), Alderliesten, R.C. (author), Wu, Zengwen (author), Zhou, Zhengong (author), Fang, Guodong (author), Zhang, Jiazhen (author), Benedictus, R. (author)
Finite-width-correction factors (FWCF) are required for GLARE to accurately predict fatigue crack growth using linear elastic fracture mechanics. As demonstrated in earlier work, these factors effectively correct for the change in specimen compliance, which in GLARE relates to intact fibre layers and the formation of delaminations between...
journal article 2019
document
Zhang, D. (author), Bluijssen, P.M. (author)
Indoor environmental quality (IEQ) in classrooms can have an effect on school children’s comfort, health, and performance. In most classrooms, the teacher is the only one who can take actions to change the IEQ. The objective of this study was to identify what teachers usually do to improve IEQ in classrooms and how these actions relate to...
journal article 2019
document
Zhang, H. (author), Liu, Y. (author), Wang, Lingen (author), Sun, Fenglian (author), Fan, Xuejun (author), Zhang, G.Q. (author)
The nanoindentation test was conducted in this paper to investigate the indentation hardness, plasticity and initial creep properties of pressure sintered nanosilver joint at various test temperatures. The effects of strain rate on the indentation hardness were first investigated. Then yield stress of nanosilver sintered joint was studied in...
journal article 2019
document
Zhang, H. (author), Šavija, B. (author), Lukovic, M. (author), Schlangen, E. (author)
This work proposes a method for numerically investigating the fracture mechanism of cement paste at the microscale based on X-ray computed tomography and nanoindentation. For this purpose, greyscale level based digital microstructure was generated by X-ray microcomputed tomography with a resolution of 2 μm/voxel length. In addition,...
journal article 2019
document
Xu, Y. (author), Zhang, H. (author), Šavija, B. (author), Chaves Figueiredo, S. (author), Schlangen, E. (author)
A method is presented to model deformation and fracture behavior of 3D printed disordered lattice materials under uniaxial tensile load. A lattice model was used to predict crack pattern and load-displacement response of the printed lattice materials. To include the influence of typical layered structures of 3D printed materials in the...
journal article 2019
document
Hou, Chengcheng (author), Qiao, Tiezhu (author), Zhang, Haitao (author), Pang, Y. (author), Xiong, Xiaoyan (author)
As an important part of modern coal mine production, conveyor belts are widely used in the coal collection and transportation. In order to ensure the safe operation of the coal mine conveyor belt and solve the drawbacks of the existing conveyor belt longitudinal tear detection technology, a multispectral visual detection method for conveyor...
journal article 2019
document
Zhang, Y. (author), Luo, Liang (author), Ge, Jin (author), Yan, Su Qiong (author), Peng, Yan Xin (author), Liu, Ya Ru (author), Liu, Jin Xiang (author), Liu, C. (author), Ma, Tianqiong (author), More Authors (author)
An "on water" organocatalytic cyanoarylmethylation of aryl acetonitrile to isatins is developed, giving products in high yields and up to excellent diastereoselectivities. A remarkable enhancement of reaction rates and diastereoselectivities by water was observed under mild conditions. Moreover, this approach provides a highly efficient and...
journal article 2019
document
Zhang, F. (author), de Ridder, H. (author), Barla, Pascal (author), Pont, S.C. (author)
Photographers and lighting designers set up lighting environments that best depict objects and human figures to convey key aspects of the visual appearance of various materials, following rules drawn from experience. Understanding which lighting environment is best adapted to convey which key aspects of materials is an important question in...
journal article 2019
document
Zhang, Y. (author), Yang, B. (author), Yang, Zhengxian (author), Ye, G. (author)
Capturing the long-term performance of concrete must be underpinned by a detailed understanding of the pore structure. Mercury intrusion porosimetry (MIP) is a widely used technique for pore structure characterization. However, it has been proven inappropriate to measure the pore size distribution of cementitious materials due to the ink-bottle...
journal article 2019
document
Weppelman, I.G.C. (author), Moerland, R.J. (author), Zhang, L (author), Kruit, P. (author), Hoogenboom, J.P. (author)
Crucial for the field of ultrafast electron microscopy is the creation of sub-picosecond, high brightness electron pulses. The use of a blanker to chop the beam that originates from a high brightness Schottky source may provide an attractive alternative to direct pulsed laser illumination of the source. We have recently presented the concept...
journal article 2019
document
Liu, Q. (author), Zhao, M. (author), Mytnyk, S. (author), Klemm, B. (author), Zhang, K. (author), Wang, Y. (author), Yan, Dadong (author), Mendes, E. (author), van Esch, J.H. (author)
Hydrogel microparticles are important in materials engineering, but their applications remain limited owing to the difficulties associated with their manipulation. Herein, we report the self-orientation of crescent-shaped hydrogel microparticles and elucidate its mechanism. Additionally, the microparticles were used, for the first time, as...
journal article 2019
document
Šavija, B. (author), Zhang, H. (author), Schlangen, E. (author)
Properties of concrete are, to a large extent, dependent on the properties of its binding constituent, hydrated cement paste. Therefore, knowledge of properties of hydrated cement paste is crucial for predicting concrete behavior. This paper presents an experimentally informed approach for modeling elastic and transport properties of cement...
journal article 2019
document
Baldi, S. (author), Zhang, Fan (author), Le, Quang Thuan (author), Endel, Petr (author), Holub, Ondrej (author)
In smart buildings, the models used for energy management and those used for maintenance scheduling differ in scope and structure: while the models for energy management describe continuous states (energy, temperature), the models used for maintenance scheduling describe only a few discrete states (healthy/faulty equipment, and fault typology...
journal article 2019
document
Zhang, L. (author), Slob, E.C. (author)
We have derived a scheme for retrieving the primary reflections from the acoustic surface-reflection response by eliminating the free-surface and internal multiple reflections in one step. This scheme does not require model information and adaptive subtraction. It consists only of the reflection response as a correlation and convolution operator...
journal article 2019
document
Hou, F. (author), Wang, W. (author), Lin, Tingyu (author), Cao, Liqiang (author), Zhang, G.Q. (author), Ferreira, J.A. (author)
In this paper, a novel fan-out panel-level printed circuit board (PCB) embedded package technology for silicon carbide (SiC) MOSFET power module is presented to address parasitic inductances, heat dissipation, and reliability issues that are inherent with aluminum wires used in conventional packaging scheme. To withstand high temperature...
journal article 2019
document
Zhang, W. (author), Ma, M. (author), Huijbers, M.M.E. (author), Filonenko, G.A. (author), Pidko, E.A. (author), van Schie, M.M.C.H. (author), de Boer, Sabrina (author), Smith, W.A. (author), Hollmann, F. (author), More Authors (author)
A recently discovered photodecarboxylase from Chlorella variabilis NC64A ( CvFAP) bears the promise for the efficient and selective synthesis of hydrocarbons from carboxylic acids. CvFAP, however, exhibits a clear preference for long-chain fatty acids thereby limiting its broad applicability. In this contribution, we demonstrate that the...
journal article 2019
document
Bommer, J.D.S. (author), Zhang, Hao (author), Gül, Önder (author), Nijholt, B. (author), Wimmer, M.T. (author), Rybakov, Filipp N. (author), Garaud, Julien (author), Car, Diana (author), Plissard, Sebastien R. (author), Bakkers, E.P.A.M. (author), Kouwenhoven, Leo P. (author)
Spin-orbit interaction (SOI) plays a key role in creating Majorana zero modes in semiconductor nanowires proximity coupled to a superconductor. We track the evolution of the induced superconducting gap in InSb nanowires coupled to a NbTiN superconductor in a large range of magnetic field strengths and orientations. Based on realistic...
journal article 2019
document
Li, Z. (author), Zhang, S. (author), Zuo, Y. (author), Chen, Wei (author), Ye, G. (author)
Chemical deformation (chemical shrinkage/expansion), the absolute volume change during reactions, is a key parameter influencing the volume stability, especially the autogenous deformation of a binder material. This work, for the first time, reports an in-depth investigation on the chemical deformation of metakaolin based geopolymer (MKG)....
journal article 2019
document
Zhang, Chi (author), Tang, Qiuhong (author), Chen, Deliang (author), van der Ent, R.J. (author), Liu, Xingcai (author), Li, Wenhong (author), Haile, Gebremedhin Gebremeskel (author)
Precipitation on the Tibetan Plateau (TP) showed different spatial changes during 1979-2016, with an increasing trend over the northern Tibetan Plateau (NTP) and a slightly negative trend over the southern Tibetan Plateau (STP). The changes in precipitation moisture sources over the NTP and STP are investigated using the improved Water...
journal article 2019
document
Zhang, Y. (author), Ouyang, Xiaowei (author), Yang, Zhengxian (author)
The internal relative humidity (RH) plays a crucial role in most of the concrete properties. Self-desiccation caused by continuous cement hydration is a major factor affecting the RH of concrete. This paper investigates the relationship between RH and microstructure for cementitious systems in the case of self-desiccation. A series of paste...
journal article 2019
Searched for:
(1 - 20 of 374)

Pages