Searched for:
(1 - 20 of 96)

Pages

document
Tang, J. (author)
Foam has unique microstructure in pore networks and reduces gas mobility significantly, which improves considerably the sweep efficiency of gas injection. Foam injection is thus regarded as a promising enhanced oil recovery (EOR) technology. One key to success of foam EOR is foam stability in presence of oil. This thesis seeks to understand...
doctoral thesis 2019
document
Chen, Min (author), Jia, Zihao (author), Tang, Hailong (author), Xiao, Yi (author), Yang, Yonghang (author), Yin, F. (author)
Supersonic civil aircraft is of a promising area in the development of future civil transport, and aircraft propulsion system is one of the key issues which determine the success of the aircraft. To get a good conceptual design and performance investigation of the supersonic civil aircraft engine, in this article, a fast, versatile as well as...
journal article 2019
document
Ha, S. (author), Tang, Y. (author), van Oene, M.M. (author), Janissen, R. (author), Dries, R.M. (author), Solano Hermosilla, B.P. (author), Adam, A.J.L. (author), Dekker, N.H. (author)
Optical trapping of (sub)micron-sized particles is broadly employed in nanoscience and engineering. The materials commonly employed for these particles, however, have physical properties that limit the transfer of linear or angular momentum (or both). This reduces the magnitude of forces and torques, and the spatiotemporal resolution,...
journal article 2019
document
Tang, J. (author), Smit, Michiel (author), Vincent-Bonnieu, S.Y.F. (author), Rossen, W.R. (author)
) definition is proposed for 2-D etched micromodels. We derive the new definition from a force balance on a nonwetting ganglion trapped by capillarity. It incorporates the impact of pore microstructure on mobilization. The geometrical factors introduced can be estimated directly from image analysis of...
journal article 2019
document
Shao, Y. (author), Loktev, Mikhail (author), Tang, Y. (author), Bociort, F. (author), Urbach, Paul (author)
For advanced imaging systems, e.g., projection systems for optical lithography, spatially varying aberration calibration is of utmost importance to achieve uniform imaging performance over the entire field-of-view (FOV). Here we present an efficient, accurate, and robust spatially varying aberration calibration method using a pair of 2...
journal article 2019
document
Zhang, Chi (author), Tang, Qiuhong (author), Chen, Deliang (author), van der Ent, R.J. (author), Liu, Xingcai (author), Li, Wenhong (author), Haile, Gebremedhin Gebremeskel (author)
Precipitation on the Tibetan Plateau (TP) showed different spatial changes during 1979-2016, with an increasing trend over the northern Tibetan Plateau (NTP) and a slightly negative trend over the southern Tibetan Plateau (STP). The changes in precipitation moisture sources over the NTP and STP are investigated using the improved Water...
journal article 2019
document
Tang, J. (author), Avallone, F. (author), Bontempo, R. (author), van Bussel, G.J.W. (author), Manna, M. (author)
This paper reports an experimental investigation on the effect of the duct geometry on the aerodynamic performance of an aerofoil shaped ducted wind turbine (DWT). The tested two-dimensional model is composed of an aerofoil equipped with pressure taps and a uniform porous screen. The experimental setup is based on the assumption that the duct...
journal article 2018
document
Wang, G. (author), Zhao, Junfei (author), Haringa, C. (author), Tang, W. (author), Xia, Jianye (author), Chu, Ju (author), Zhuang, Yingping (author), Zhang, Siliang (author), Deshmukh, A.T. (author), van Gulik, W.M. (author), Heijnen, J.J. (author), Noorman, H.J. (author)
large-scale penicillin fermentor, the cells experience substrate gradient cycles at the timescales of global mixing time about 20–40 s. Here, we used an intermittent feeding regime (IFR) and a two-compartment reactor (TCR) to mimic these substrate gradients at laboratory-scale continuous cultures. The IFR was applied to...
journal article 2018
document
Xiahou, Xiaer (author), Yuan, Jingfeng (author), Liu, Y. (author), Tang, Yuchun (author), Li, Qiming (author)
Construction industrialization (CI) has been adopted worldwide because of its potential benefits. However, current research shows the incentives for adopting CI may differ in different regions. While the promotion of CI in China is still at the initial stage, a systematical analysis of the driving factors would help decision makers get a...
journal article 2018
document
Haringa, C. (author), Tang, W. (author), Wang, G. (author), Deshmukh, A.T. (author), van Winden, Wouter A. (author), Chu, Ju (author), van Gulik, W.M. (author), Heijnen, J.J. (author), Mudde, R.F. (author), Noorman, H.J. (author)
We assess the effect of substrate heterogeneity on the metabolic response of P. chrysogenum in industrial bioreactors via the coupling of a 9-pool metabolic model with Euler-Lagrange CFD simulations. In this work, we outline how this coupled hydrodynamic-metabolic modeling can be utilized in 5 steps. (1) A model response study with a fixed...
journal article 2018
document
Bi, Jichao (author), Yang, L. (author), Yang, Xiaofan (author), Wu, Yingbo (author), Tang, Yuan Yan (author)
This article addresses the tradeoff between the losses caused by a new virus and the size of the team for developing an antivirus against the virus. First, an individual-level virus spreading model is proposed to capture the spreading process of the virus before the appearance of its natural enemy. On this basis, the tradeoff problem is...
journal article 2018
document
Tang, T. (author), Anupam, K. (author), Kasbergen, C. (author), Kogbara, Reginald B. (author), Scarpas, Athanasios (author), Masad, Eyad A. (author)
The skid resistance of a pavement surface is an important characteristic that influences traffic safety. Previous studies have shown that skid resistance varies with temperature. However, relatively limited work has been carried out to study the effect of temperature on skid resistance in hot climates. Recent developments in computing and...
journal article 2018
document
Qian, C. (author), Mirzagheytaghi, Amir (author), Fan, J. (author), Tang, H. (author), Sun, B. (author), Ye, H. (author), Zhang, G.Q. (author)
As an increasing attention towards sustainable development of energy and environment, the power electronics (PEs) are gaining more and more attraction on various energy systems. The insulated gate bipolar transistor (IGBT), as one of the PEs with numerous advantages and potentials for development of higher voltage and current ratings, has been...
journal article 2018
document
Manca, N. (author), Groenendijk, D.J. (author), Pallecchi, Ilaria (author), Autieri, Carmine (author), Tang, Lucas M.K. (author), Telesio, Francesca (author), Mattoni, G. (author), McCollam, Alix (author), Picozzi, Silvia (author), Caviglia, A. (author)
Relating the band structure of correlated semimetals to their transport properties is a complex and often open issue. The partial occupation of numerous electron and hole bands can result in properties that are seemingly in contrast with one another, complicating the extraction of the transport coefficients of different bands. The 5d oxide...
journal article 2018
document
Ye, H. (author), Hu, F.F. (author), Tang, H. (author), Yang, L.W. (author), Chen, Xianping (author), Wang, L.G. (author), Zhang, G.Q. (author)
In this work, the structural, electronic and optical properties of germanene and ZnSe substrate nanocomposites have been investigated using first-principles calculations. We found that the large direct-gap ZnSe semiconductors and zero-gap germanene form a typical orbital hybridization heterostructure with a strong binding energy, which shows...
journal article 2018
document
Liu, Jikai (author), Gaynor, Andrew T. (author), Chen, Shikui (author), Kang, Zhan (author), Suresh, Krishnan (author), Takezawa, Akihiro (author), Li, Lei (author), Kato, Junji (author), Tang, Jinyuan (author), Wang, C.C. (author), Cheng, Lin (author), Liang, Xuan (author), To, Albert. C. (author)
Manufacturing-oriented topology optimization has been extensively studied the past two decades, in particular for the conventional manufacturing methods, for example, machining and injection molding or casting. Both design and manufacturing engineers have benefited from these efforts because of the close-to-optimal and friendly-to-manufacture...
journal article 2018
document
Tang, H. (author), Ye, Huai-Yu (author), Chen, Xian Ping (author), Qian, Cheng (author), Fan, Xuejun (author), Zhang, G.Q. (author)
In this paper, the heat transfer performance of the multi-chip (MC) LED module is investigated numerically by using a general analytical solution. The configuration of the module is optimized with genetic algorithm (GA) combined with a response surface methodology. The space between chips, the thickness of the metal core printed circuit board...
journal article 2017
document
Tang, Linkai (author), He, Yan Bing (author), Wang, Chao (author), Wang, Shuan (author), Wagemaker, M. (author), Li, Baohua (author), Yang, Quan Hong (author), Kang, Feiyu (author)
(LTO) materials enabling high rate performance suffer from a large specific surface area and low tap density lowering the cycle life and practical energy density. Microsized LTO materials have high density which generally compromises their rate capability. Aiming at combining the favorable...
journal article 2017
document
Zhang, Xinying (author), Wu, Yan (author), Xiao, Gao (author), Tang, Zhenping (author), Wang, Meiyin (author), Liu, Fuchang (author), Zhu, X. (author)
Azo dyes are very resistant to light-induced fading and biodegradation. Existing advanced oxidative pre-treatment methods based on the generation of non-selective radicals cannot efficiently remove these dyes from wastewater streams, and post-treatment oxidative dye removal is problematic because it may leave many byproducts with unknown...
journal article 2017
document
Qian, Kun (author), Tang, Linkai (author), Wagemaker, M. (author), He, Yan Bing (author), Liu, Dongqing (author), Li, Hai (author), Shi, Ruiying (author), Li, Baohua (author), Kang, Feiyu (author)
particles. The remarkable improvement of surface quality shows a higher first cycle Coulombic efficiency (≈95%), a significantly enhanced cycling...
journal article 2017
Searched for:
(1 - 20 of 96)

Pages