Searched for: +
(1 - 20 of 53)

Pages

document
Lin, H. (author), Liang, H. (author), Han, B. (author), Zhong, J. (author), Su, Q. (author), Dorenbos, P. (author), Birowosuto, M.D. (author), Zhang, G. (author), Fu, Y. (author), Wu, W. (author)
journal article 2007
document
Yuan, C.A. (author), Zhang, G.Q. (author), Han, C.N. (author), Chiang, K.N. (author), Cui, Y. (author)
The mechanical characteristics of the long-chain double-stranded DNA (dsDNA) molecule under the axial stretching and lateral unzipping are studied by the clustered atomistic-continuum method (CACM). The CACM consisted of the clustered atom method (CAM) and the atomistic-continuum method (ACM). The CAM treats the specific atomic group as the...
journal article 2007
document
Han, B. (author), Liang, H. (author), Lin, H. (author), Zhong, J. (author), Su, Q. (author), Dorenbos, P. (author), Birowosuto, M.D. (author), Zhang, G. (author), Fu, Y. (author)
The phosphors Ba3Gd(BO3)3:Ce3+ were prepared by a solid-state reaction technique at high temperature. The vacuum ultraviolet-ultraviolet and visible spectroscopic properties of the phosphors together with decay time curves are investigated and discussed. The spectroscopic properties are explained by occupancy of Ce3+ at two different Gd sites in...
journal article 2007
document
Wang, X. (author), Xing, F. (author), Zhang, M. (author), Han, N. (author), Qian, Z. (author)
A new type of self-healing cementitious composites by using organic microcapsules is designed in Guangdong Key Laboratory of Durability for Coastal Civil Engineering, Shenzhen University. For the organic microcapsules, the shell material is urea formoldehyde (UF), and the core healing agent is Epoxy. The effect of organic microcapsules on...
conference paper 2013
document
Zhang, M. (author), Han, N. (author), Xing, F. (author), Wang, X. (author), Schlangen, H.E.J.G. (author)
For a microcapsule based self-healing system in the cementitious material, a fundamental issue is to find and facilitate a suitable microcapsule system, concerning either the material selection or design and manufacture process. In this study, urea formaldehyde resin is used for the shell of microcapsule, and bisphenol – an epoxy resin E-51...
conference paper 2013
document
Zhang, J.L. (author), Deng, X. (author), Feng, X. (author), Han, N.X. (author), Jonkers, H.M. (author)
The CaCO3-mineralizing bacteria from different taxonomic groups have shown potential in restoration of construction material such as concretes, cements and stony materials. However, these strains are far from the demand of practical application due to some shortages, including the low mineralizing capacity. In this work, an integrated high...
conference paper 2013
document
Zhang, M. (author), Han, N. (author), Xing, F. (author), Wang, X. (author), Schlangen, H.E.J.G. (author)
An international cooperation research project has been financially supported by China Nature Science Foundation, which consists of three relatively independent, but strategically integrated research sub-programs, aiming at the formation of a selfhealing system based on the microcapsule principle for the cementitious composites. In this paper, a...
conference paper 2013
document
Zhang, J.L. (author), Deng, X. (author), Feng, X. (author), Han, N.X. (author), Jonkers, H.M. (author)
The CaCO3-mineralizing bacteria from different taxonomic groups have shown potential in restoration of construction material such as concretes, cements and stony materials. However, these strains are far from the demand of practical application due to some shortages, including the low mineralizing capacity. In this work, an integrated high...
conference paper 2013
document
Zhang, M. (author), Han, N. (author), Xing, F. (author), Wang, X. (author), Schlangen, H.E.J.G. (author)
An international cooperation research project has been financially supported by China Nature Science Foundation, which consists of three relatively independent, but strategically integrated research sub-programs, aiming at the formation of a selfhealing system based on the microcapsule principle for the cementitious composites. In this paper, a...
conference paper 2013
document
Wang, X. (author), Xing, F. (author), Zhang, M. (author), Han, N. (author), Qian, Z. (author)
A new type of self-healing cementitious composites by using organic microcapsules is designed in Guangdong Key Laboratory of Durability for Coastal Civil Engineering, Shenzhen University. For the organic microcapsules, the shell material is urea formoldehyde (UF), and the core healing agent is Epoxy. The effect of organic microcapsules on...
conference paper 2013
document
Zhang, M. (author), Han, N. (author), Xing, F. (author), Schlangen, H.E.J.G. (author)
For a microcapsule based self-healing system in the cementitious material, a fundamental issue is to find and facilitate a suitable microcapsule system, concerning either the material selection or design and manufacture process. In this study, urea formaldehyde resin is used for the shell of microcapsule, and bisphenol – an epoxy resin E-51...
conference paper 2013
document
Wang, X. (author), Xing, F. (author), Zhang, M. (author), Han, N. (author), Qian, Z. (author)
The recovery behavior for strength and impermeability of cementitious composites embedded with organic microcapsules was investigated in this study. Mortar specimens were formed by mixing the organic microcapsules and a catalyst with cement and sand. The mechanical behaviors of flexural and compression strength were tested. The results showed...
journal article 2013
document
Prisacaru, Alexandru (author), Gromala, Przemyslaw Jakub (author), Jeromio, Mateus Bagetti (author), Han, Bongtae (author), Zhang, Kouchi (author)
Miniaturization of electronics, reduction of time to market and new functionalities in the current context of autonomous driving, electrification and connectivity, are bringing new reliability challenges. Prognostics and Health Management (PHM) can be used effectively to address some of the key challenges, in particular new challenges...
conference paper 2017
document
Prisacaru, Alexandru (author), Palczynska, Alicja (author), Gromala, Przemyslaw Jakub (author), Han, Bongtae (author), Zhang, Kouchi (author)
Recent advancements in automotive technologies, most notably autonomous driving, demand electronic systemsmuch more complex than realized in the past. The automotiveindustry has been forced to adopt advanced consumerelectronics to satisfy the demand, and thus it becomes morechallenging to assess system reliability while adopting the...
conference paper 2017
document
Prisacaru, Alexandru (author), Palczynska, Alicja (author), Theissler, Andreas (author), Gromala, Przemyslaw (author), Han, Bongtae (author), Zhang, Kouchi (author)
Recent advancements in automotive technologies, most notably autonomous driving, demand electronic systems much more complex than those realized in the past. The automotive industry has been forced to adopt advanced consumer electronics to satisfy the demand, and thus it becomes more challenging to assess system reliability while adopting the...
journal article 2018
document
Li, Y. (author), Han, Qinglin (author), Zhang, Guangjun (author), Horvath, I. (author)
Robotic wire and arc additive manufacturing (WAAM) systems are required to provide predictable and efficient operations to fabricate solid metallic parts with high morphological fidelity and geometric accuracy. Since the metallic parts are fabricated based on a layer-by-layer principle, the interactions between the neighboring beads and...
journal article 2018
document
Han, J. (author), Zhang, Lingling (author), Zhang, Qunfei (author), Leus, G.J.T. (author)
Differential orthogonal frequency division multiplexing (OFDM) is practically attractive for underwater acoustic communications since it has the potential to obviate channel estimation. However, similar to coherent OFDM, it may suffer from severe inter-carrier interference over time-varying channels. To alleviate the induced performance...
journal article 2018
document
Han, J. (author), Chepuri, S.P. (author), Zhang, Qunfei (author), Leus, G.J.T. (author)
Orthogonal signal-division multiplexing (OSDM) is a promising modulation scheme that provides a generalized framework to unify orthogonal frequency-division multiplexing (OFDM) and single-carrier frequency-domain equalization. By partitioning each data block into vectors, it allows for a flexible configuration to trade off resource management...
journal article 2019
document
Li, Y. (author), Han, Qinglin (author), Horvath, I. (author), Zhang, Guangjun (author)
An approach to repairing surface defects of metal parts is proposed, which includes a combined application of (i) groove machining, (ii) wire and arc additive manufacturing (WAAM), and (iii) finishing machining. The completed analysis revealed that (i) the inclination angle of the groove to be machined is strongly influenced by the...
journal article 2019
document
Han, J. (author), Wang, Yujie (author), Zhang, Lingling (author), Leus, G.J.T. (author)
Orthogonal signal-division multiplexing (OSDM) is a recently emerging modulation scheme which, compared to conventional orthogonal frequency-division multiplexing, can effectively lower the peak-to-average power ratio and introduce intra-vector frequency diversity. In this paper, a time-domain oversampled OSDM system for underwater acoustic ...
journal article 2019
Searched for: +
(1 - 20 of 53)

Pages