Searched for: +
(1 - 20 of 52)

Pages

document
Yu, Z. (author), Ye, G. (author), Van Breugel, K. (author), Chen, W. (author)
Deterioration of microstructure in cement concrete will cause changes in the transport properties of the concrete. Transport properties at different ages of the concrete provide information about the microstructural changes of the material. A way to measure the transport properties, i.e. the chloride diffusion coefficient, in the laboratory is...
conference paper 2014
document
Khaliq, J. (author), Li, C. (author), Chen, K. (author), Shi, B. (author), Ye, H. (author), Grande, A.M. (author), Yan, H. (author), Reece, M.J. (author)
The effect of substitution and oxidation-reduction on the thermal conductivity of perovskite-like layered structure (PLS) ceramics was investigated in relation to mass contrast and non-stoichiometry. Sr (acceptor) was substituted on the A site, while Ta (donor) was substituted on the B site of La2Ti2O7. Substitution in PLS materials creates...
journal article 2015
document
Chen, X.P. (author), Jiang, J.K. (author), Liang, Q.H. (author), Yang, N. (author), Ye, H.Y. (author), Cai, M. (author), Shen, L. (author), Yang, D.G. (author), Ren, T.L. (author)
We present a first-principles density functional theory study focused on how the chemical and electronic properties of polyaniline are adjusted by introducing suitable substituents on a polymer backbone. Analyses of the obtained energy barriers, reaction energies and minimum energy paths indicate that the chemical reactivity of the polyaniline...
journal article 2015
document
Chen, Xianping (author), Ye, H. (author), Fan, Xuejun (author), Ren, Tianling (author), Zhang, Kouchi (author)
Heat pipes (HPs) have received considerable attention in recent decades, especially in the field of cooling electronics, which requires the removal of added heat from an area of limited volume to the environment. Small HPs are widely used in electronic applications, which are normally limited by the compact structure and dimensions of the...
journal article 2016
document
Ye, H. (author), Leung, Stanley Y.Y. (author), Wong, K.Y. (author), Chen, Xianping (author), Lin, Kai (author), Fan, J. (author), Kjelstrup, Signe (author), Fan, Xuejun (author), Zhang, Kouchi (author)
Using the analogue of the electric inductance, we reveal the properties of the thermal inductance in GaN-based light-emitting diode devices by testing their transient thermal behaviors. We find that the devices exhibit a transient thermal response under step-down or step-up currents and observe notable inductive phenomena of the temperature...
journal article 2016
document
Chen, J. (author), Liu, Xian (author), Ye, G. (author)
Microcracks play vital roles in the prediction of the service life of concrete structure. Because microcracks in concrete structure are the preferential ingression channels for aggressive ions, e.g., chloride, sulphate, etc. However, microcracks have potentials to self-heal autogenously due to the continuous hydration of unhydrated cement,...
conference paper 2016
document
Hu, Fa-Fei (author), Tang, H. (author), Ye, H. (author), Chen, X. (author), Zhang, Kouchi (author)
The sensing behavior of monolayer tin sulfide (SnS) for four gas molecules (NH<sub>3</sub>, NO<sub>2</sub>, CO, and H<sub>2</sub>O) are studied by the first-principle calculation based on density-functional theory. We calculate adsorption energy, adsorption distance, and Hirshfeld charge to estimate the adsorption ability of monolayer SnS for...
journal article 2017
document
Tang, H. (author), Ye, H. (author), Wong, K.Y. (author), Leung, Stanley Y.Y. (author), Fan, Jiajie (author), Chen, Xianping (author), Fan, Xuejun (author), Zhang, Kouchi (author)
The objective of this study is to quantitatively evaluate the impacts of LED components on the overdriving reliability of high power white LED chip scale packages (CSPs). The reliability tests under room temperature are conducted over 1000 h in this study on CSP LEDs with overdriving currents. A novel method is proposed to investigate the...
journal article 2017
document
Tang, H. (author), Ye, Huai-Yu (author), Chen, Xian-Ping (author), Qian, Cheng (author), Fan, Xue-Jun (author), Zhang, Kouchi (author)
In this paper, the heat transfer performance of the multi-chip (MC) LED module is investigated numerically by using a general analytical solution. The configuration of the module is optimized with genetic algorithm (GA) combined with a response surface methodology. The space between chips, the thickness of the metal core printed circuit board...
journal article 2017
document
Ye, H. (author), Hu, F.F. (author), Tang, H. (author), Yang, L.W. (author), Chen, X.P. (author), Wang, L.G. (author), Zhang, Kouchi (author)
In this work, the structural, electronic and optical properties of germanene and ZnSe substrate nanocomposites have been investigated using first-principles calculations. We found that the large direct-gap ZnSe semiconductors and zero-gap germanene form a typical orbital hybridization heterostructure with a strong binding energy, which shows...
journal article 2018
document
Yang, Huiru (author), Wang, Zeping (author), Ye, H. (author), Zhang, Kai (author), Chen, X. (author), Zhang, Kouchi (author)
Sensitive materials for formaldehyde (HCHO) sensor need high sensitivity and selectivity. The research on two dimensional (2D) sensitive material is growing, and most studies focus on the pristine or modified graphene. So it is essential to introduce other 2D materials into HCHO gas sensor. In this report, the adsorption behaviors of organic...
journal article 2018
document
Chen, B. (author), Sun, Yubo (author), Jacquemin, Loic (author), Zhang, Shizhe (author), Blom, Kees (author), Lukovic, M. (author), Ye, G. (author)
At present, most municipal solid waste incineration (MSWI) bottom ash, as being disposed of as waste, is directly landfilled, raising concern about the environmental issue and potential loss of resources. Given that the natural raw materials used for cement production are being depleted, the recycling of MSWI bottom ash for the application as...
conference paper 2019
document
Li, Z. (author), Nedeljković, Marija (author), Chen, B. (author), Ye, G. (author)
This study investigates the effectiveness of metakaolin (MK)in mitigating the autogenous shrinkage of alkali-activated slag (AAS). It is found that the autogenous shrinkage of AAS paste can be reduced by 40% and 50% when replacing 10% and 20% slag with MK, respectively. By providing additional Si and Al, and decreasing the pH of the pore...
journal article 2019
document
Li, Z. (author), Zhang, Shizhe (author), Zuo, Y. (author), Chen, Wei (author), Ye, G. (author)
Chemical deformation (chemical shrinkage/expansion), the absolute volume change during reactions, is a key parameter influencing the volume stability, especially the autogenous deformation of a binder material. This work, for the first time, reports an in-depth investigation on the chemical deformation of metakaolin based geopolymer (MKG)....
journal article 2019
document
Chen, J. (author), Ye, G. (author)
Cracking is inevitable during the service period of concrete structures. They are preferential ingression channels for aggressive ions. It is difficult or even impossible to repair all the cracks due to the limitation of practical conditions. However, cracks have potentials to self-heal due to further hydration and carbonization. The effect of...
journal article 2019
document
Han, Rui (author), Liu, Chi Harold (author), Li, Shilin (author), Chen, Lydia Y. (author), Wang, Guoren (author), Tang, Jian (author), Ye, Jieping (author)
The core of many large-scale machine learning (ML) applications, such as neural networks (NN), support vector machine (SVM), and convolutional neural network (CNN), is the training algorithm that iteratively updates model parameters by processing massive datasets. From a plethora of studies aiming at accelerating ML, being data...
journal article 2019
document
Zou, Sheng (author), Xiao, Hanbin (author), Ye, Fangping (author), Li, Z. (author), Tang, Wenzhi (author), Zhu, Feng (author), Chen, Chentong (author), Zhu, Chao (author)
The inevitably formed residual stress in the Selective Laser Melting (SLM) process leads to distortion, crack and even delamination of the workpiece. Single laser is commonly applied during SLM processing. However, its productivity is much lower than multiple lasers. In addition, the research of residual stress with multi-laser condition...
journal article 2020
document
Li, Z. (author), Yao, X. (author), Chen, Y. (author), Lu, T. (author), Ye, G. (author)
Alkali-activated slag and fly ash (AASF) materials are emerging as promising alternatives to conventional Portland cement. Despite the superior mechanical properties of AASF materials, they are known to show large autogenous shrinkage, which hinders the wide application of these eco-friendly materials in infrastructure. To mitigate the...
journal article 2020
document
Qiu, Xiujiao (author), Chen, J. (author), Ye, G. (author), De Schutter, Geert (author)
ASR (alkali-silica reaction) is one of the toughest durability problems in engineering. However, the damage induced by ASR is still fairly unpredictable due to the lack of microstructural information of cement-based materials affected by ASR, while the microstructure determines the global performance. In order to fill this gap, a multiscale...
conference paper 2021
document
Chen, Y. (author), Dolado, Jorge S. (author), Yin, Suhong (author), Yu, Qijun (author), Kostiuchenko, A. (author), Li, Z. (author), Ye, G. (author)
The understanding of sodium aluminosilicate hydrate (N-A-S-H) gel is still limited due to its complex and amorphous structure. Recently, molecular dynamics simulation has provided a unique opportunity to better understand the structure of N-A-S-H gel from nanoscale. In this work, the N-A-S-H gel structure was obtained by simulating the...
conference paper 2021
Searched for: +
(1 - 20 of 52)

Pages