Searched for: +
(1 - 20 of 37)

Pages

document
Yang, W. (author), Chen, Tingshu (author), He, Renke (author), Goossens, R.H.M. (author), Huysmans, T. (author)
Subjective scales are frequently used in the design process of head-related products to assess pressure discomfort. Nevertheless, some users lack fundamental cognitive and motor abilities (e.g., paralyzed patients). Therefore, it is vital to find non-verbal measurements of pressure discomfort and pressure pain. This study gathered the autonomic...
journal article 2024
document
Yao, Liaojun (author), Wang, Jiexiong (author), He, Yonglyu (author), Zhao, Xiuhui (author), Chen, Xiangming (author), Liu, J. (author), Guo, Licheng (author), Alderliesten, R.C. (author)
Fatigue delamination growth (FDG) is an important failure in composite structures during their long-term operations. Hygrothermal aging can have significant effects on interlaminar resistance. It is therefore really necessary to explore FDG behavior in composite laminates with hygrothermal aging. Dynamic mechanical thermal analysis (DMTA),...
journal article 2024
document
Liang, M. (author), Xie, J. (author), He, S. (author), Chen, Y. (author), Schlangen, E. (author), Šavija, B. (author)
Early-age cracking risk induced by autogenous deformation is high for cementitious materials of low water-binder ratios. The autogenous deformation, viscoelastic properties, and stress evolution are three important factors for understanding and quantifying the early-age cracking risk. This paper systematically reviewed the experimental and...
review 2024
document
Chen, Y. (author), Zhang, Y. (author), He, S. (author), Liang, M. (author), Zhang, Yamei (author), Schlangen, E. (author), Copuroglu, Oguzhan (author)
Limestone-calcined clay-cement (LC3), as one of the most promising sustainable cements, has been under development over the past decade. However, many uncertainties remain regarding its rheological behaviors, such as the metakaolin content of calcined clay. This study aims to investigate the effect of increasing the content of fine-grained...
journal article 2023
document
Boonprakong, Nattapat (author), He, G. (author), Gadiraju, Ujwal (author), Van Berkel, Niels (author), Wang, Danding (author), Chen, Si (author), Liu, Jiqun (author), Tag, Benjamin (author), Goncalves, Jorge (author), Dingler, Tilman (author)
AI systems are increasingly incorporated into human decision-making. Yet, human decision-makers are often affected by their cognitive biases. In critical settings, such as medical diagnosis, criminal judgment, or information consumption, these cognitive biases hinder optimal decision outcomes, thereby resulting in dangerous decisions and...
conference paper 2023
document
Zhao, Xiujie (author), Chen, P. (author), Lv, Shanshan (author), He, Zhen (author)
Return of products within the warranty coverage induces additional cost and loss of reputation to manufacturers. It is of practical interest to predict the return rate by experimental means before introducing a product to the market. In this paper, we propose to optimize accelerated reliability tests to achieve the goal within limited time....
journal article 2023
document
Yang, X. (author), Guo, Fucheng (author), Liu, Tao (author), He, Qiang (author), Vymazal, Jan (author), Chen, Yi (author)
Ammonia-oxidizing microorganisms (AOMs, archaea (AOA) and bacteria (AOB)) are primarily responsible for the ammoxidation in constructed wetlands (CWs). However, little is known about evaluating the response of AOA and AOB to engineered nanomaterials (ENMs) and quantifying the shift of their contribution to ammoxidation. Herein, we operated a...
journal article 2023
document
Zhou, Jianle (author), Hollmann, F. (author), He, Qi (author), Chen, Wen (author), Ma, Yunjian (author), Wang, Yonghua (author)
The realm of photobiocatalytic alkane biofuel synthesis has burgeoned recently; however, the current dearth of well-established and scalable production methodologies in this domain remains conspicuous. In this investigation, we engineered a modified form of membrane-associated fatty acid photodecarboxylase sourced from Micractinium conductrix...
journal article 2023
document
He, S. (author), Chen, Y. (author), Liang, M. (author), Yang, En-Hua (author), Schlangen, E. (author)
This study investigates the microstructural changes of cement paste due to the inclusion of polymeric microfiber at different water-to-cement (w/c) ratios. A procedure to quantify the porosity of epoxy impregnated interfacial transition zone (ITZ) is also presented. Results show that the microstructures of the ITZ beneath and above a...
journal article 2023
document
Meng, Yuanyuan (author), Ye, Xiangqian (author), He, Fuqiong (author), Chen, Zhipeng (author), Hu, Chichun (author), Lin, P. (author)
Terminal blended rubberized asphalt binder (TB) technology, which blends crumb tire rubber (CR) with asphalt under high interaction conditions, offers a promising waste tire recycling solution for pavement construction. By precisely controlling the degradation progress of CR, it is possible to prepare TB with specific property requirements....
journal article 2023
document
Chen, Y. (author), Zhang, Y. (author), He, S. (author), Liang, X. (author), Schlangen, E. (author), Copuroglu, Oguzhan (author)
In 3D concrete printing, fast structuration is a prerequisite for ideal buildability. This paper aims to study the impact of inorganic additives, i.e., CaCl<sub>2</sub> and gypsum, on structural build-up and very early-age hydration of limestone-calcined clay-cement (LC3) pastes within the first 70–80 min. Results show that, increasing the...
journal article 2023
document
Wan, Z. (author), Xu, Y. (author), He, S. (author), Chen, Y. (author), Xie, J. (author), Šavija, B. (author)
Direct ink writing of cementitious materials can be an alternative way for creating vascular self-healing concrete by intentionally incorporating hollow channels in the cementitious matrix. In this study, a 3D-printable fibre reinforced mortar was first developed. Three groups of specimens were fabricated using direct ink writing, where the...
journal article 2023
document
Liang, M. (author), Zhang, Y. (author), He, S. (author), Chen, Y. (author), Schlangen, E. (author), Šavija, B. (author)
This study investigated the evolution process of high-volume slag cement (HVSC) paste from a chemo-mechanical standpoint. HVSC specimens with a 70 w.t. % slag replacement rate were studied at various ages. Evolution of phase assemblage, microstructure development, and micromechanical properties were analyzed using TGA/XRD/MIP/SEM-EDS and nano...
journal article 2023
document
He, S. (author), Wan, Z. (author), Chen, Y. (author), Jonkers, H.M. (author), Schlangen, E. (author)
The current study investigates short-term and long-term crack-healing behaviour of mortars embedded with bacteria-based poly-lactic acid (PLA) capsules under both ideal and realistic environmental conditions. Two sets of specimens were prepared and subjected to different healing regimes, with the first set kept in a mist room for varying...
journal article 2023
document
Chen, Yangkun (author), Yu, Chenghui (author), Zhu, Hengman (author), Liu, Shuai (author), Zhang, Yibing (author), Suarez, Joseph (author), Zhao, Liang (author), He, J. (author), Chen, Jiaxin (author)
We present the results of the second Neural MMO challenge, hosted at IJCAI 2022, which received 1600+ submissions. This competition targets robustness and generalization in multi-agent systems: participants train teams of agents to complete a multi-task objective against opponents not seen during training. We summarize the competition design...
journal article 2023
document
Wang, Zhe (author), Wu, Shilong (author), Chen, Hang (author), He, Mao-Kui (author), Du, Jun (author), Lee, Chin-Hui (author), Chen, Jingdong (author), Watanabe, Shinji (author), Siniscalchi, Sabato Marco (author), Scharenborg, O.E. (author), Liu, Diyuan (author)
The Multi-modal Information based Speech Processing (MISP) challenge aims to extend the application of signal processing technology in specific scenarios by promoting the research into wake-up words, speaker diarization, speech recognition, and other technologies. The MISP2022 challenge has two tracks: 1) audio-visual speaker diarization (AVSD),...
conference paper 2023
document
Gao, Z. (author), He, J. (author), Fritz, Martin (author), Gong, J. (author), Shen, Y. (author), Zong, Z. (author), Chen, Peng (author), Staszewski, R.B. (author), Alavi, S.M. (author), Babaie, M. (author)
In a fractional-N PLL, it is beneficial to minimize the input range of its phase detector (PD) as it promotes better linearity and higher PD gain for suppressing noise contributions of the following loop components. This can be done by canceling the predicted instantaneous time offset between the frequency reference (FREF) and the variable...
conference paper 2022
document
Chen, Y. (author), Chang, Z. (author), He, S. (author), Copuroglu, Oguzhan (author), Šavija, B. (author), Schlangen, E. (author)
A good bond between the layers of 3D printed cementitious materials is a prerequisite for having high structural rigidity for the printed elements. However, the influence of printing process on an interlayer bond is still not well understood. This study investigates the influence of curing methods (i.e., air curing, plastic film covering, wet...
journal article 2022
document
Yang, W. (author), He, Renke (author), Chen, Tingshu (author), Goossens, R.H.M. (author), Huysmans, T. (author)
Analysing the contact area between head-related products and the corresponding craniofacial profile is necessary to make such products more comfortable. The study of soft tissue biomechanical experiments provides a reliable perspective for understanding such contact areas and improving the comfort. In order to obtain more accurate and visualized...
journal article 2022
document
Chen, Y. (author), He, S. (author), Gan, Y. (author), Copuroglu, Oguzhan (author), Veer, F.A. (author), Schlangen, E. (author)
This paper aims to provide a systematical review of the available printing strategies, sustainable cementitious materials and characterization methods for extrusion-based 3D concrete printing (3DCP). The printing strategies, consisting of printing setup, process, and material requirements, were summarized initially. In the material aspect,...
journal article 2022
Searched for: +
(1 - 20 of 37)

Pages