Effect of pretreated cow dung fiber on rheological and fatigue properties of asphalt binder

Cow dung waste has caused severe environmental pollution and public health issues in China. In this study, the cow dung residues were used as a cheap renewable fiber to modify asphalt binder, providing a new solution for the proper disposal of cow dung waste. Three cow dung fibers with two lengths were prepared using different treatments,...

Investigation on the technical performance and workability of hot-melting road marking materials using for the high-altitude area

The special environment conditions in high altitude areas leads to serious cracking and peeling of road hot-melt marking coatings. In order to improve the durability of marking paint, a durable hot-melt marking paint was designed by modifying the paint with toughening-agent, rheological agent, and anti-aging agent. The modification mechanism...

Stretchable strain sensor based on HfSe₂/LIG composite with high sensitivity and good linearity within a wide range

Flexible strain sensors based on nanomaterials have sparked a lot of interest in the field of wearable smart electronics. Laser induced graphene (LIG) based sensors in particular stand out due to their straightforward fabrication procedure, three-dimensional porous structures, and exceptional electromechanical capabilities. Recent studies...

Microwave Heating Healing of Asphalt Mixture with Coal Gangue Powder and Basalt Aggregate

Microwave heating is an effective method to achieve autonomic crack healing in asphalt mixtures, and the use of microwave-absorbing materials can largely improve this healing efficiency. As a solid waste, coal gangue contains metal oxides, which shows the possibility of microwave heating. In order to further promote the application of coal...

High-Performance Flexible Strain Sensor Fabricated Using Laser Transmission Pyrolysis

In recent years, metal crack-based stretchable flexible strain sensors have attracted significant attention in wearable device applications due to their extremely high sensitivity. However, the tradeoff between sensitivity and detection range has been an intractable dilemma, severely limiting their practical applications. Herein, we propose a...

Life cycle assessment of material footprint in recycling: A case of concrete recycling

Meeting the current demand for concrete requires not only mining tons of gravel and sand, but also burning large amounts of fossil fuel resources in cement kilning. Consequently, concrete recycling is crucial to achieving a material-efficient society, especially with the application of various categories of concrete and the goal of phasing...

Strain-engineered S-HfSe₂ monolayer as a promising gas sensor for detecting NH₃: A first-principles study

The development of high-performance gas sensing materials is one of the development trends of new gas sensor technology. In this work, in order to predict the gas-sensitive characteristics of HfSe₂ and its potential as a gas-sensitive material, the interactions of nonmetallic element (O, S, Te) doped HfSe₂ monolayer and...

Room temperature ppt-level NO₂ gas sensor based on SnO _x/SnS nanostructures with rich oxygen vacancies

In this paper, tin oxidation (SnO x )/tin-sulfide (SnS) heterostructures are synthesized by the post-oxidation of liquid-phase exfoliated SnS nanosheets in air. We comparatively analyzed the NO2 gas response of samples with different oxidation levels to study the gas sensing mechanisms. The results show that the samples oxidized at 325 °C are...

New innovations in pavement materials and engineering: A review on pavement engineering research 2021

Sustainable and resilient pavement infrastructure is critical for current economic and environmental challenges. In the past 10 years, the pavement infrastructure strongly supports the rapid development of the global social economy. New theories, new methods, new technologies and new materials related to pavement engineering are emerging....

A contactless measuring speed system of belt conveyor based on machine vision and machine learning

During the operation of the belt conveyor, measuring speed of the belt conveyor is vital to the safe and efficient operation. In the existing measuring speed system, the measurement instrument is required contacting with the surface of the belt. The contact measurement method cannot avoid the occurrence of measuring error caused by slipping...