Searched for:
(1 - 12 of 12)
document
Schakel, M.D. (author), Smeulders, D.M.J. (author), Slob, E.C. (author), Heller, H.K.J. (author)
Understanding the seismoelectric interface response is important for developing seismoelectric field methods for oil exploration and environmental/engineering geophysics. The existing seismoelectric theory has never been validated systematically by controlled experiments. We have designed and developed an experimental setup in which acoustic-to...
journal article 2011
document
Van der Neut, J.R. (author), Thorbecke, J.W. (author), Mehta, K. (author), Slob, E.C. (author), Wapenaar, C.P.A. (author)
Various researchers have shown that accurate redatuming of controlled seismic sources to downhole receiver locations can be achieved without requiring a velocity model. By placing receivers in a horizontal or deviated well and turning them into virtual sources, accurate images can be obtained even below a complex near-subsurface. Examples...
journal article 2011
document
Mahdad, A. (author), Doulgeris, P. (author), Blacquiere, G. (author)
Seismic acquisition is a trade-off between economy and quality. In conventional acquisition the time intervals between successive records are large enough to avoid interference in time. To obtain an efficient survey, the spatial source sampling is therefore often (too) large. However, in blending, or simultaneous acquisition, temporal overlap...
journal article 2011
document
Gouedard, P. (author), Roux, P. (author), Campillo, M. (author), Verdel, A.R. (author), Yao, H. (author), Van der Hilst, R.D. (author)
We use seismic prospecting data on a 40 × 40 regular grid of sources and receivers deployed on a 1 km × 1 km area to assess the feasibility and advantages of velocity analysis of the shallow subsurface by means of surface-wave tomography with Green's functions estimated from crosscorrelation. In a first application we measure Rayleigh-wave...
journal article 2011
document
Dragoset, B. (author), Verschuur, D.J. (author), Moore, I. (author), Bisley, R. (author)
Surface-related multiple elimination (SRME) is an algorithm that predicts all surface multiples by a convolutional process applied to seismic field data. Only minimal preprocessing is required. Once predicted, the multiples are removed from the data by adaptive subtraction. Unlike other methods of multiple attenuation, SRME does not rely on...
journal article 2010
document
Draganov, D.S. (author), Campman, X. (author), Thorbecke, J.W. (author), Verdel, A. (author), Wapenaar, C.P.A. (author)
One application of seismic interferometry is to retrieve the impulse response (Green's function) from crosscorrelation of ambient seismic noise. Various researchers show results for retrieving the surface-wave part of the Green's function. However, reflection retrieval has proven more challenging. We crosscorrelate ambient seismic noise,...
journal article 2009
document
Jardani, A. (author), Revil, A. (author), Slob, E.C. (author), Söllner, W. (author)
The interpretation of seismoelectrical signals is a difficult task because coseismic and seismoelectric converted signals are recorded simultaneously and the seismoelectric conversions are typically several orders of magnitude smaller than the coseismic electrical signals. The seismic and seismoelectric signals are modeled using a finite-element...
journal article 2009
document
Panea, I. (author), Drijkoningen, G.G. (author)
Coherent noise generated by surface waves or ground roll within a heterogeneous near surface is a major problem in land seismic data. Array forming based on single-sensor recordings might reduce such noise more robustly than conventional hardwired arrays. We use the minimum-variance distortionless-response (MVDR) beamformer to remove (aliased)...
journal article 2008
document
Van Veldhuizen, E.J. (author), Blacquiere, G. (author), Berkhout, A.J. (author)
Increasingly, we must deal with complex subsurface structures in seismic exploration, often resulting in poor illumination and, therefore, poor image quality. Consequently, it is desirable to take into consideration the effects of wave propagation in the subsurface structure when designing an acquisition geometry. We developed a new, model-based...
journal article 2008
document
Turhan Taner, M. (author), Berkhout, A.J. (author), Treitel, S. (author), Kelamis, P.G. (author)
The statics problem, whether short wavelength, long wavelength, residual, or trim, has always been one of the more time-consuming and problematic steps in seismic data processing. We routinely struggle with issues such as poor signal-to-noise (S/N) ratio, cycle skipping, truncated refractors, wavelets with ambiguous first arrival times, etc....
journal article 2007
document
Berkhout, A.J. (author), Verschuur, D.J. (author)
Interpolation of data beyond aliasing limits and removal of noise that occurs within the seismic bandwidth are still important problems in seismic processing. The focal transform is introduced as a promising tool in data interpolation and noise removal, allowing the incorporation of macroinformation about the involved wavefields. From a physical...
journal article 2006
document
Berkhout, A.J. (author)
Until now, seismic processing has been carried out by applying inverse filters in the forward data space. Because the acquired data of a seismic survey is always discrete, seismic measurements in the forward data space can be arranged conveniently in a data matrix (P). Each column in the data matrix represents one shot record. If we represent...
journal article 2006
Searched for:
(1 - 12 of 12)