The Effect of Conductive Alginate Capsules Encapsulating Rejuvenator (HealRoad Capsules) on the Healing Properties of 10 mm Stone Mastic Asphalt Mix

Conductive alginate capsules encapsulating a bitumen rejuvenator (HealRoad capsules) has demonstrated good healing abilities in pure bitumen and mortar mixes. HealRoad capsules can efficiently heal damage via induction heating. They also release the encapsulated rejuvenator, thereby rejuvenating aged bitumen. These findings indicate that...

3D Printing of a Self-Healing Thermoplastic Polyurethane through FDM: From Polymer Slab to Mechanical Assessment

The use of self-healing (SH) polymers to make 3D-printed polymeric parts offers the po-tential to increase the quality of 3D-printed parts and to increase their durability and damage toler-ance due to their (on-demand) dynamic nature. Nevertheless, 3D-printing of such dynamic poly-mers is not a straightforward process due to their polymer...

On the Applicability of a Precursor Derived from Organic Waste Streams for Bacteria-Based Self-Healing Concrete

Bacteria-based self-healing concrete has the ability to heal cracks due to the bacterial conversion of incorporated organic compounds into calcium carbonate. Precipitates seal the cracks, theoretically increasing the service life of constructions. The aim of this paper is to propose a precursor for bacteria-based self-healing concrete derived...

Corrosion Inhibition at Scribed Locations in Coated AA2024-T3 by Cerium- and DMTD-Loaded Natural Silica Microparticles under Continuous Immersion and Wet/Dry Cyclic Exposure

Earlier studies on cerium-loaded naturally occurring silica microparticles (i.e., diatomaceous earth) demonstrated the potential to efficiently protect small scratches in epoxy-coated AA2024-T3 panels during relatively short immersion times. The current work investigates the potential of such inhibitor-loaded microparticles to protect wide...

Damage evolution in a self-healing air plasma sprayed thermal barrier coating containing self-shielding MoSi ₂ particles

A self‐healing thermal barrier coating (TBC) system is manufactured by air plasma spraying (APS) and tested by thermal cycling. The ceramic topcoat in the self‐healing APS TBC system consists of an yttria stabilised zirconia (YSZ) matrix and contains self‐shielding aluminium containing MoSi2 healing particles dispersed close to the topcoat/bond...

Finite element modelling of creep cavity filling by solute diffusion

In recently discovered self healing creep steels, open-volume creep cavities are filled by the precipitation of supersaturated solute. These creep cavities form on the grain boundaries oriented perpendicular to the applied stress. The presence of a free surface triggers a flux of solute from the matrix, over the grain boundaries towards the...

Autonomous high-temperature healing of surface cracks in Al₂O₃ containing Ti₂AlC particles

In this work, the oxidation-induced crack healing of Al₂O₃ containing 20 vol.% of Ti₂AlC MAX phase inclusions as healing particles was studied. The oxidation kinetics of the Ti₂AlC particles having an average diameter of about 10 μm was studied via thermogravimetry and/or differential thermal...

A review study on encapsulation-based self-healing for cementitious materials

Encapsulation-based self-healing technology is an effective method for healing the crack-deteriorated cementitious material. Encapsulation-based self-healing initiates by crack occurrence and progresses by chemical reaction of released self-healing agents in the cracks, which are contained in capsules. In this paper, a review has been...

Simulation-Aided Design of Tubular Polymeric Capsules for Self-Healing Concrete

Polymeric capsules can have an advantage over glass capsules used up to now as proof-of-concept carriers in self-healing concrete. They allow easier processing and afford the possibility to fine tune their mechanical properties. Out of the multiple requirements for capsules used in this context, the capability of rupturing when crossed by a...

Effect of the Dianhydride/Branched Diamine Ratio on the Architecture and Room Temperature Healing Behavior of Polyetherimides

Traditional polyetherimides (PEIs) are commonly synthesized from an aromatic diamine and an aromatic dianhydride (e.g., 3,4′-oxidianiline (ODA) and 4,4′-oxidiphtalic anhydride (ODPA)) leading to the imide linkage and outstanding chemical, thermal and mechanical properties yet lacking any self-healing functionality. In this work, we have replaced...

Reinforcement and healing of asphalt mixtures by rejuvenator encapsulation in alginate compartmented fibres

This paper explores the potential use of compartmented alginate fibres as a new method of incorporating rejuvenators into asphalt pavement mixtures. The compartmented fibres are employed to locally distribute the rejuvenator and to overcome the problems associated with spherical capsules and hollow fibres. The work presents proof of concept of...

Demonstrating the self-healing behaviour of some selected ceramics under combustion chamber conditions

Closure of surface cracks by self-healing of conventional and MAX phase ceramics under realistic turbulent combustion chamber conditions is presented. Three ceramics namely; Al₂O₃, Ti₂AlC and Cr₂AlC are investigated. Healing was achieved in Al₂O₃ by even dispersion of TiC...

Healing of Early Stage Fatigue Damage in Ionomer/Fe₃O₄ Nanoparticle Composites

This work reports on the healing of early stage fatigue damage in ionomer/nano-particulate composites. A series of poly(ethylene-co-methacrylic acid) zinc ionomer/Fe3O4 nanoparticle composites with varying amounts of ionic clusters were developed and subjected to different levels of fatigue loading. The initiated damage was healed upon localized...

Effect of polymer architecture on the intrinsic self-healing character of polymers

Intrinsic and extrinsic self-healing strategies can be employed to mitigate the effects of local damage in order to (partially) restore a lost property or functionality and to avoid premature catastrophic failure of the whole system. It is well known that polymer architecture has a crucial influence on mechanical, physical and thermal properties...

Un nouveau béton auto-cicatrisant grâce à l’incorporation de bactéries

La formation d’un réseau continu de fissures contribue à l’augmentation de la perméabilité du béton, réduisant ainsi de manière importante sa résistance à l’attaque d’agents agressifs dissous dans l’eau. Afin d’augmenter la capacité de cicatrisation autogène du béton, certains agents cicatrisants spécifiques peuvent être incorporés dans la...

Application of encapsulated lightweight aggregate impregnated with sodium monofluorophosphate as a self-healing agent in blast furnace slag mortar

This paper studies the potential of using expanded clay lightweight aggregate impregnated with sodium monofluorophosphate (Na2FPO3) solution which is eventually encapsulated by a cement paste layer to produce a self-healing system in blast furnace slag cement mortars. It was found that the technique significantly improved the quality of the...

Induction heating of mastic containing conductive fibers and fillers

The objective of this research is to examine the induction heating of mastic through the addition of electrically conductive fillers and fibers (graphite and steel wool), and to prove that this material can be healed with induction energy. The effect of fibers content, sand–bitumen ratio and the combination of fillers and fibers on the induction...