Searched for:
(1 - 20 of 297)

Pages

document
Liu, Faqi (author), Yang, Hua (author), Yan, R. (author), Wang, Wei (author)
The behaviour of square steel tube confined reinforced concrete columns after fire exposure was studied experimentally and numerically in this paper. Eighteen stub columns were first heated following the ISO 834 standard fire including both heating and cooling phases, and were subsequently loaded to failure after cooling to ambient temperature....
journal article 2019
document
Apostolidis, P. (author), Liu, X. (author), Erkens, Sandra (author), Scarpas, Athanasios (author)
In epoxy-bitumen systems, temperature contributes to the development of physiochemical and mechanical characteristics during curing (chemical hardening) and at the long-term service (oxidative aging) of pavement structures. Hardening (i.e., chemical or oxidative controlled) is a complex phenomenon in epoxy-modified binders and the in-depth...
journal article 2019
document
Zhang, H. (author), Liu, Y. (author), Wang, Lingen (author), Sun, Fenglian (author), Fan, Xuejun (author), Zhang, G.Q. (author)
The nanoindentation test was conducted in this paper to investigate the indentation hardness, plasticity and initial creep properties of pressure sintered nanosilver joint at various test temperatures. The effects of strain rate on the indentation hardness were first investigated. Then yield stress of nanosilver sintered joint was studied in...
journal article 2019
document
Liu, Mengyao (author), Lin, Jintai (author), Folkert Boersma, K. (author), Pinardi, Gaia (author), Wang, Yang (author), Chimot, J.J. (author), Wagner, Thomas (author), Xie, Pinhua (author), Eskes, Henk (author), More Authors (author)
pollution and impact evaluation. For regions with high aerosol loadings, the retrieval accuracy is greatly affected by whether aerosol optical effects are treated implicitly (as additional effective clouds)...
journal article 2019
document
Zhang, H. (author), Liu, Y. (author), Wang, Lingen (author), Sun, Fenglian (author), Fan, Jiajie (author), Placette, Mark D. (author), Fan, Xuejun (author), Zhang, G.Q. (author)
Modern power electronics has the increased demands in current density and high-temperature reliability. However, these performance factors are limited due to the die attach materials used to affix power dies microchips to electric circuitry. Although several die attach materials and methods exist, nanosilver sintering technology has received...
journal article 2019
document
Ma, Jiliang (author), van Ommen, J.R. (author), Liu, Daoyin (author), Mudde, R.F. (author), Chen, Xiaoping (author), Pan, Suyang (author), Liang, Cai (author)
The increase of inter-particle cohesive force greatly changes the fluidization dynamics, finally leading to the partial or complete failure of fluidization. However, few studies concern such transition process. This paper investigates the fluidization dynamics of Geldart B particles with a wide-range of cohesive force by analyzing the in-bed...
journal article 2019
document
Zhang, Y. (author), Luo, Liang (author), Ge, Jin (author), Yan, Su Qiong (author), Peng, Yan Xin (author), Liu, Ya Ru (author), Liu, Jin Xiang (author), Liu, C. (author), Ma, Tianqiong (author), More Authors (author)
An "on water" organocatalytic cyanoarylmethylation of aryl acetonitrile to isatins is developed, giving products in high yields and up to excellent diastereoselectivities. A remarkable enhancement of reaction rates and diastereoselectivities by water was observed under mild conditions. Moreover, this approach provides a highly efficient and...
journal article 2019
document
Liu, Q. (author), Zhao, M. (author), Mytnyk, S. (author), Klemm, B. (author), Zhang, K. (author), Wang, Y. (author), Yan, Dadong (author), Mendes, E. (author), van Esch, J.H. (author)
Hydrogel microparticles are important in materials engineering, but their applications remain limited owing to the difficulties associated with their manipulation. Herein, we report the self-orientation of crescent-shaped hydrogel microparticles and elucidate its mechanism. Additionally, the microparticles were used, for the first time, as...
journal article 2019
document
Ma, Jiliang (author), van Ommen, J.R. (author), Liu, Daoyin (author), Mudde, R.F. (author), Chen, Xiaoping (author), Wagner, E.C. (author), Liang, Cai (author)
Due to the presence of inter-particle cohesive force, cohesive particles reveal totally different fluidization behaviors as compared to the non-cohesive system. This paper studies the fluidization dynamics of Geldart B particles with varying thermal-induced cohesive forces. Multi-source X-ray tomography was applied to reconstruct 3D temporal...
journal article 2019
document
Wang, Y. (author), Lovrak, M. (author), Liu, Q. (author), Maity, C. (author), le Sage, V.A.A. (author), Guo, Xuhong (author), Eelkema, R. (author), van Esch, J.H. (author)
Hierarchical compartmentalization through the bottom-up approach is ubiquitous in living cells but remains a formidable task in synthetic systems. Here we report on hierarchically compartmentalized supramolecular gels that are spontaneously formed by multilevel self-sorting. Two types of molecular gelators are formed in situ from...
journal article 2019
document
Apostolidis, P. (author), Liu, X. (author), Daniel, Gerald C. (author), Erkens, Sandra (author), Scarpas, Athanasios (author)
The utilisation of synthetic fibres has been reported in the past showing enhancement of fatigue and thermal cracking resistance in asphaltic materials. However, the limited evidences about the benefits of these fibres in asphaltic materials at low material scales have been noticed. Also, the exact reinforcing mechanism of binding system in the...
journal article 2019
document
Zhang, Chi (author), Tang, Qiuhong (author), Chen, Deliang (author), van der Ent, R.J. (author), Liu, Xingcai (author), Li, Wenhong (author), Haile, Gebremedhin Gebremeskel (author)
Precipitation on the Tibetan Plateau (TP) showed different spatial changes during 1979-2016, with an increasing trend over the northern Tibetan Plateau (NTP) and a slightly negative trend over the southern Tibetan Plateau (STP). The changes in precipitation moisture sources over the NTP and STP are investigated using the improved Water...
journal article 2019
document
Holland, Oliver (author), Steinbach, Eckehard (author), Venkatesha Prasad, R.R. (author), Liu, Qian (author), Dawy, Zaher (author), Aijaz, Adnan (author), Pappas, Nikolaos (author), Joshi, K.C. (author), Rao, V.S. (author), More Authors (author)
The IEEE 'Tactile Internet' (TI) Standards working group (WG), designated the numbering IEEE 1918.1, undertakes pioneering work on the development of standards for the TI. This paper describes the WG, its intentions, and its developing baseline standard and the associated reasoning behind that and touches on a further standard already...
journal article 2019
document
Wang, X. (author), Shan, M. (author), Liu, X. (author), Wang, M. (author), Doherty, Cara M. (author), Osadchii, D. (author), Kapteijn, F. (author)
Increasing helium use in research and production processes necessitates separation techniques to secure sufficient supply of this noble gas. Energy-efficient helium production from natural gas is still a big challenge. Membrane gas separation technology could play an important role. Herein, a novel poly(p-phenylene benzobisimidazole) (PBDI)...
journal article 2019
document
Josa-Culleré, Laia (author), Lahdenperä, Antti S.K. (author), Ribaucourt, Aubert (author), Höfler, G.T. (author), Gargiulo, S. (author), Liu, Yuan Yang (author), Paradisi, Francesca (author), Hollmann, F. (author), Paul, C.E. (author), More Authors (author)
Redox reactions catalyzed by highly selective nicotinamide-dependent oxidoreductases are rising to prominence in industry. The cost of nicotinamide adenine dinucleotide coenzymes has led to the use of well-established elaborate regeneration systems and more recently alternative synthetic biomimetic cofactors. These biomimetics are highly...
journal article 2019
document
Apostolidis, P. (author), Liu, X. (author), van de Ven, Martin (author), Erkens, Sandra (author), Scarpas, Athanasios (author)
Epoxy modification of asphalt binders has been recognized as a very effective technology to alter the chemistry of asphaltic materials in such a way that long-lasting pavement structures can be designed. However, the phenomena that are involved to build up the physico-mechanical properties of epoxy asphalt systems are still unknown. The focus of...
journal article 2019
document
Zhang, Chunyan (author), Liu, B. (author), Yu, Baoxing (author), Lu, Xiaopeng (author), Wei, Yong (author), Zhang, Tao (author), Mol, J.M.C. (author), Wang, Fuhui (author)
Surface pretreatment is generally applied before application of protective coatings on Mg alloys, which influences surface microstructure and electrochemical activity of the substrate and has an effect on the coating properties. The effect of various pretreatment processes (sand-blasting, grinding and polishing) on the microstructure and...
journal article 2019
document
Yu, T. (author), Liu, Chuanpu (author), Yu, Haiming (author), Blanter, Y.M. (author), Bauer, G.E. (author)
We theoretically investigate the interlayer dipolar and exchange couplings between an array of metallic magnetic nanowires grown on top of an extended ultrathin yttrium iron garnet film. The calculated interlayer dipolar coupling agrees with observed anticrossings [Chen et al., Phys. Rev. Lett. 120, 217202 (2018)PRLTAO0031-900710.1103...
journal article 2019
document
Lyu, Maolong (author), Baldi, S. (author), Liu, Zongcheng (author)
This work removes the critical assumptions of continuity, differentiability, and state-independent boundedness, which are typical of compounded disturbances in disturbance observer-based adaptive designs. Crucial in removing such assumptions are a novel observer-based design with state-dependent gain in place of a constant one, and a novel...
journal article 2019
document
Zhang, Youyou (author), Mosallam, Ayman (author), Liu, Yuqing (author), Sun, Yun (author), Xin, H. (author), He, Jun (author)
In this study, flexural behaviors of the pultruded composite laminate were evaluated through experiments and theoretical analysis. Three-point flexural tests were performed for pultruded specimens. The typical failure mode for the longitudinal flexural specimens was local crush on the top surface accompanied with local cracks on the bottom...
journal article 2019
Searched for:
(1 - 20 of 297)

Pages