Pages
- 1
- 2
- document
-
Zhang, Liang (author), Li, Guang (author), Chen, Huang (author), Tang, Jingtian (author), Yang, Guanci (author), Yu, Mingbiao (author), Hu, Yong (author), Xu, Jun (author), Sun, J. (author)Audio magnetotelluric (AMT) is commonly used in mineral resource exploration. However, the weak energy of AMT signals makes them susceptible to being overwhelmed by noise, leading to erroneous geophysical interpretations. In recent years, deep learning has been applied to AMT denoising and has shown better denoising performance compared to...journal article 2024
- document
-
Liu, Shurui (author), Lu, T. (author), Tang, Z. (author), Chen, Zhiyuan (author), Jiang, Junmin (author), Zhao, Bo (author), Du, S. (author)In this article, we propose a reconfigurable regulating rectifier with a wide operational range for wireless power transfer. The proposed three-mode rectifier achieves a broad range voltage regulation without global loop control to minimize the chip area occupation. Compared with previous work, more working modes and greater voltage gain...journal article 2023
- document
-
Li, Wenyu (author), Chen, Wei (author), Jiang, Jing (author), Tang, H. (author), Fan, J. (author)Double-sided packages for heat dissipation are an efficient thermal management mechanism for power semiconductor devices. A fan-out panel-level packaging (FOPLP), as one of the double-sided forms, exhibits excellent electro–thermal characteristics and provides low stray inductance and thermal resistance. Besides, the temperature at each point...journal article 2023
- document
-
Guo, Huadong (author), Chen, Fulong (author), Tang, Yunwei (author), Ding, Yanbin (author), Chen, Min (author), Zhou, Wei (author), Zhu, Meng (author), Zheng, Wenwu (author), Pereira Roders, A. (author)The quantification of the extent and dynamics of land-use changes is a key metric employed to assess the progress toward several Sustainable Development Goals (SDGs) that form part of the United Nations 2030 Sustainable Development Agenda. In terms of anthropogenic factors threatening the conservation of heritage properties, such a metric...journal article 2023
- document
-
Tang, Yingjie (author), Mou, Junmin (author), Chen, Linying (author), Zhou, Y. (author)Through the continuous development of intellectualization, considering the lifecycle of ships, the future of a waterborne traffic system is bound to be a mixed scenario where intelligent ships of different autonomy levels co-exist, i.e., mixed waterborne traffic. According to the three modules of ships’ perception, decision-making, and execution...review 2022
- document
-
Chen, Qixin (author), Fang, Xichen (author), Guo, Hongye (author), Zheng, Kedi (author), Tang, Qinghu (author), Lv, Ruike (author), Pan, K. (author), Palensky, P. (author), Kirschen, Daniel S. (author), Kang, Chongqing (author)Equilibrium analysis has been widely studied as an effective tool to model gaming interactions and predict market results. However, as competition modes are fundamentally changed by the decarbonization and decentralization of power systems, analysis techniques must evolve. This article comprehensively reviews recent developments in modelling...journal article 2022
- document
-
Li, Yuanyuan (author), Li, Jun (author), Li, Chao (author), Chen, Anqi (author), Bai, Tao (author), Tang, Shimin (author), Wu, Shaopeng (author), Gao, Y. (author), Zhu, Hongbin (author), Feng, Jianlin (author)A self-compacting steel slag epoxy resin concrete (SERC) was designed with steel slag as aggregate and epoxy resin as binder for rapid repair of road expansion joints and pavement. At the same time, a group of self-compacting basalt epoxy resin concrete (BERC) with basalt as coarse aggregate and limestone as fine aggregate was set up as the...journal article 2022
- document
-
Fan, Jiajie (author), Qian, Yichen (author), Chen, Wei (author), Jiang, Jing (author), Tang, Zhuorui (author), Fan, Xuejun (author), Zhang, Kouchi (author)A fan-out panel-level packaging (FOPLP) with an embedded redistribution layer (RDL) via interconnection reduces the size, thermal resistance, and parasitic inductance of power module packaging. In this study, the effect of the RDL via size on the reliability of a FOPLP SiC MOSFET power module was investigated. To improve the thermal management...conference paper 2022
- document
-
Liu, Yubo (author), Zhang, Chi (author), Tang, Qiuhong (author), Hosseini-Moghari, Seyed Mohammad (author), Haile, Gebremedhin Gebremeskel (author), Li, Laifang (author), Li, Wenhong (author), Yang, Kun (author), van der Ent, R.J. (author), Chen, Deliang (author)Rainfall is one of the most influential climatic factors on regional development and environment, and changes in rainfall intensity are of specific concern. In the Huaihe River Valley (HRV), heavy rainfall is a primary trigger of floods. However, the difference in the origin of moisture contributed to heavy rainfall and light rainfall is...journal article 2021
- document
-
Chen, M. (author), Zhu, Li (author), Chen, Jingwen (author), Yang, Fenglin (author), Tang, Chuyang Y. (author), Guiver, Michael D. (author), Dong, Yingchao (author)Highly efficient and economic treatment of wastewater sludges and wastewaters in one way is a challenging issue in the water treatment field. Herein we present a waste-to-resource strategy for rational fabrication of low–cost ceramic membranes, which simultaneously addresses the treatment of heavy metal-laden sludges and the separation of oil...journal article 2020
- document
-
Zou, Sheng (author), Xiao, Hanbin (author), Ye, Fangping (author), Li, Z. (author), Tang, Wenzhi (author), Zhu, Feng (author), Chen, Chentong (author), Zhu, Chao (author)The inevitably formed residual stress in the Selective Laser Melting (SLM) process leads to distortion, crack and even delamination of the workpiece. Single laser is commonly applied during SLM processing. However, its productivity is much lower than multiple lasers. In addition, the research of residual stress with multi-laser condition...journal article 2020
- document
-
Xu, Junzhong (author), Gao, Fei (author), Soeiro, Thiago B. (author), Chen, Linglin (author), Tarisciotti, Luca (author), Tang, Houjun (author), Bauer, P. (author)The implementation of traditional finite-control-set model predictive control (FCS-MPC) with variable switching frequency in voltage source rectifiers (VSRs) can make the system suffer from poor current harmonics performance. In fact, the resulting wide-spread voltage harmonic generated at the AC terminals makes the design of the typical multi...conference paper 2020
- document
-
Xu, Junzhong (author), Gao, Fei (author), Soeiro, Thiago B. (author), Chen, Linglin (author), Tarisciotti, Luca (author), Tang, Houjun (author), Bauer, P. (author)In the applications of three-phase two-level voltage source inverters (VSIs) relatively large energy storage capacitors are used to absorb the high DC-link current ripples mainly caused by the circulating reactive power, the switched AC phase current flowing to the DC-link, and other dynamic and/or asymmetric operating conditions. Especially for...conference paper 2020
- document
-
Shen, X. J. (author), Li, D. Z. (author), Tang, S. (author), Chen, J. (author), Fang, H. (author), Wang, G. D. (author)It is still a big challenge to obtain excellent low-temperature toughness for bulk steel materials. Delamination is an effective method to improve low-temperature toughness. In the present study, delamination toughening in a low carbon microalloyed steel plate with elongated and ultrafine-grained microstructure rolled in the dual-phase region...journal article 2019
- document
-
Han, Rui (author), Liu, Chi Harold (author), Li, Shilin (author), Chen, Lydia Y. (author), Wang, Guoren (author), Tang, Jian (author), Ye, Jieping (author)The core of many large-scale machine learning (ML) applications, such as neural networks (NN), support vector machine (SVM), and convolutional neural network (CNN), is the training algorithm that iteratively updates model parameters by processing massive datasets. From a plethora of studies aiming at accelerating ML, being data...journal article 2019
- document
-
Zhang, Chi (author), Tang, Qiuhong (author), Chen, Deliang (author), van der Ent, R.J. (author), Liu, Xingcai (author), Li, Wenhong (author), Haile, Gebremedhin Gebremeskel (author)Precipitation on the Tibetan Plateau (TP) showed different spatial changes during 1979-2016, with an increasing trend over the northern Tibetan Plateau (NTP) and a slightly negative trend over the southern Tibetan Plateau (STP). The changes in precipitation moisture sources over the NTP and STP are investigated using the improved Water...journal article 2019
- document
-
Chen, Min (author), Jia, Zihao (author), Tang, Hailong (author), Xiao, Yi (author), Yang, Yonghang (author), Yin, F. (author)Supersonic civil aircraft is of a promising area in the development of future civil transport, and aircraft propulsion system is one of the key issues which determine the success of the aircraft. To get a good conceptual design and performance investigation of the supersonic civil aircraft engine, in this article, a fast, versatile as well as...journal article 2019
- document
-
Ye, H. (author), Hu, F.F. (author), Tang, H. (author), Yang, L.W. (author), Chen, X.P. (author), Wang, L.G. (author), Zhang, Kouchi (author)In this work, the structural, electronic and optical properties of germanene and ZnSe substrate nanocomposites have been investigated using first-principles calculations. We found that the large direct-gap ZnSe semiconductors and zero-gap germanene form a typical orbital hybridization heterostructure with a strong binding energy, which shows...journal article 2018
- document
-
Liu, Jikai (author), Gaynor, Andrew T. (author), Chen, Shikui (author), Kang, Zhan (author), Suresh, Krishnan (author), Takezawa, Akihiro (author), Li, Lei (author), Kato, Junji (author), Tang, Jinyuan (author), Wang, C.C. (author), Cheng, Lin (author), Liang, Xuan (author), To, Albert. C. (author)Manufacturing-oriented topology optimization has been extensively studied the past two decades, in particular for the conventional manufacturing methods, for example, machining and injection molding or casting. Both design and manufacturing engineers have benefited from these efforts because of the close-to-optimal and friendly-to-manufacture...journal article 2018
- document
-
Tang, H. (author), Ye, Huai-Yu (author), Chen, Xian-Ping (author), Qian, Cheng (author), Fan, Xue-Jun (author), Zhang, Kouchi (author)In this paper, the heat transfer performance of the multi-chip (MC) LED module is investigated numerically by using a general analytical solution. The configuration of the module is optimized with genetic algorithm (GA) combined with a response surface methodology. The space between chips, the thickness of the metal core printed circuit board...journal article 2017
Pages
- 1
- 2