Searched for: +
(1 - 20 of 155)

Pages

document
Ylla Arbos, C. (author), Schielen, R.M.J. (author), van Vuren, Saskia (author), Snoek, Yvo (author), Blom, A. (author)
Channel adjustment in engineered rivers is often associated with channel bed incision (e.g., Chowdhury et al., 2023, Czapiga et al., 2022a, 2022b, Ylla Arbós et al., 2021). Channel bed incision reduces the stability of in-river structures, exposes river-crossing cables and pipelines, and the spatial variability of channel bed incision due to...
abstract 2024
document
Mirra, M. (author), Gerardini, A. (author)
Wood-based retrofitting techniques for seismic upgrading and architectural conservation of existing buildings have found increasing application in the last decades. With reference to the in-plane seismic strengthening of existing timber floors, a particularly efficient solution consists of an overlay of plywood panels fastened to the sheathing....
conference paper 2023
document
Hobeika, N. (author), Garcia Sanchez, C. (author), Bluyssen, P.M. (author)
The corona pandemic underlined a lack of Indoor Air Quality (IAQ) and<br/>ventilation. Consequently, to limit the spread of the virus, researchers explored several indicators that, through different approaches, assess IAQ and ventilation performance in indoor spaces. This paper gives an overview of those indicators and assessment methods used to...
abstract 2023
document
Suzuki, T. (author), Altomare, Corrado (author), Willems, Marc (author), Dan, Sebastian (author)
Understanding key flooding processes such as wave overtopping and overflow (i.e., water flows over a structure when the crest level of the structure is lower than the water level in front) is crucial for coastal management and coastal safety assessment. In port and harbour environments, waves are not only perpendicular to the coastal...
journal article 2023
document
Martinelli, M. (author), Pisano, F. (author)
Cone penetration tests (CPTs) can quantitatively inform about the mechanical state of a sand. However, relating measured cone resistance values to sand state requires complex back-analysis of the processes occurring in the soil during the test. This paper provides new evidence of the value added in this area by modern large-deformation...
journal article 2022
document
Cao, L. (author), Procel Moya, P.A. (author), Alcañiz Moya, A. (author), Yan, J. (author), Tichelaar, F.D. (author), Özkol, E. (author), Zhao, Y. (author), Han, C. (author), Yang, G. (author), Yao, Z. (author), Zeman, M. (author), Santbergen, R. (author), Mazzarella, L. (author), Isabella, O. (author)
Thin films of transition metal oxides such as molybdenum oxide (MoO<sub>x</sub>) are attractive for application in silicon heterojunction solar cells for their potential to yield large short-circuit current density. However, full control of electrical properties of thin MoO<sub>x</sub> layers must be mastered to obtain an efficient hole...
journal article 2022
document
Zhao, Shengying (author), Guan, Xinchun (author), Qiao, Guofu (author)
Superabsorbent polymer (SAP) can modify the microstructure and influence the mechanical properties of cement paste in at least two ways: while cavities left by SAP increase the total porosity, water released by SAP affects the hydration degree of the surrounding paste. As a starting point for investigation into the overall effect, this study...
conference paper 2021
document
Barneveld, Hermjan (author), Hoitink, Ton (author), Mosselman, E. (author), Chavarrias, V. (author)
abstract 2021
document
Dào, H.T. (author), Hofland, Bas (author), Suzuki, Tomohiro (author), Stive, M.J.F. (author), Mai, Tri (author), Tuan, Le Xuan (author)
Mangrove forests, that often act as natural coastal defences, enormously suffered due to ongoing climate change and human disturbances. Thus, it is necessary to have a countermeasure to mitigate the loss of mangroves. Wooden fences are becoming a viable nature-based solution to protect vulnerable replanted mangrove forests. However, the wooden...
journal article 2021
document
Weij, D. (author)
Breaching is an important production mechanism for stationary suction dredgers. It is a process occurring in submerged sandy slopes, which mostly occurs in dense sandy soils with a low permeability. The process is initiated by the formation of a slope under water, whose angle is steeper than the internal friction angle, called the breach face....
doctoral thesis 2020
document
Lucas, Daisy (author), Herzog, Ralf (author), Iten, Markus (author), Buschor, Heinz (author), Kieper, Andreas (author), Askarinejad, A. (author), Springman, Sarah M. (author)
Predicting the trigger of a slope failure of a steep Alpine scree slope in south-west Switzerland is challenging. The groundwater (GW) flow from snow-melting and rainfall infiltration during summer changes the susceptibility to surficial failure, which also depends on the slope angle, bedrock geometry, stratigraphy and the shear strength of the...
journal article 2020
document
Varkey, D. (author), Hicks, M.A. (author), van den Eijnden, A.P. (author), Vardon, P.J. (author)
Various simplified approaches are used to calculate the characteristic values of shear strength properties, which have then been used in deterministic stability analyses of a dyke cross-section. The calculated factors of safety are compared with the 5-percentile ‘system response’ of the dyke cross-section, calculated using the more exhaustive...
journal article 2020
document
Byrne, Byron W. (author), Houlsby, Guy T. (author), Burd, Harvey J. (author), Gavin, Kenneth (author), Igoe, David J.P. (author), Jardine, Richard J. (author), Martin, Christopher M. (author), McAdam, Ross A. (author), Potts, David M. (author)
Offshore wind turbines in shallow coastal waters are typically supported on monopile foundations. Although three-dimensional (3D) finite-element methods are available for the design of monopiles in this context, much of the routine design work is currently conducted using simplified one-dimensional (1D) models based on the p-y method. The p-y...
journal article 2020
document
Taborda, David M.G. (author), Zdravkovic, Lidija (author), Potts, David M. (author), Burd, Harvey J. (author), Byrne, Byron W. (author), Gavin, Kenneth (author), Houlsby, Guy T. (author), Jardine, Richard J. (author), Liu, Tingfa (author)
The paper presents the development of a three-dimensional finite-element model for pile tests in dense Dunkirk sand, conducted as part of the PISA project. The project was aimed at developing improved design methods for laterally loaded piles, as used in offshore wind turbine foundations. The importance of the consistent and integrated...
journal article 2020
document
Burd, Harvey J. (author), Taborda, David M.G. (author), Zdravkovic, Lidija (author), Abadie, Christelle N. (author), Byrne, Byron W. (author), Houlsby, Guy T. (author), Gavin, Kenneth (author), Igoe, David J.P. (author), Jardine, Richard J. (author)
This paper describes a one-dimensional (1D) computational model for the analysis and design of laterally loaded monopile foundations for offshore wind turbine applications. The model represents the monopile as an embedded beam and specially formulated functions, referred to as soil reaction curves, are employed to represent the various...
journal article 2020
document
Liu, H. (author), Abell, J. A. (author), Diambra, A. (author), Pisano, F. (author)
The modelling and simulation of cyclic sand ratcheting is tackled by means of a plasticity model formulated within the well-known critical state, bounding surface SANISAND framework. For this purpose, a third locus – termed the ‘memory surface’ – is cast into the constitutive formulation, so as to phenomenologically capture micro-mechanical,...
journal article 2019
document
Oliveira Santos, Francisco (author), Louter, P.C. (author), Ramôa Correia, João (author)
Thin glass is currently widespread in mobile devices and has great potential for applications in buildings. However, presently there is no standard method to determine the strength of thin glass for building applications and there is little experimental data available on its mechanical behaviour. Hence, this paper presents experimental and...
conference paper 2018
document
Hilgersom, K.P. (author), Zijlema, Marcel (author), van de Giesen, N.C. (author)
The three-dimensional (3-D) modelling of water systems involving double-diffusive processes is challenging due to the large computation times required to solve the flow and transport of constituents. In 3-D systems that approach axisymmetry around a central location, computation times can be reduced by applying a 2-D axisymmetric model set-up....
journal article 2018
document
Mosselman, E. (author)
Marked differences occur between modelling in scientific hydraulic research, in hydraulic engineering and in public decision making. This study reviews ifferences in the required accuracy of model results and differences in the choice between physical and numerical modelling. Physical models are used for studying elementary processes and their...
other 2017
document
Mosselman, E. (author)
Marked differences occur between modelling in scientific hydraulic research, in hydraulic engineering and in public decision making. This study reviews ifferences in the required accuracy of model results and differences in the choice between physical and numerical modelling. Physical models are used for studying elementary processes and their...
abstract 2017
Searched for: +
(1 - 20 of 155)

Pages