Pages
- 1
- 2
- document
-
Ubacht, J. (author), Schmid, Jonathan (author), Rietveld, Elmer (author), Lennartz, Jelmer (author), Rukanova, B.D. (author), Tan, Y. (author)The European Commission initiated a series of Directives and Regulations that aim to turn the linear economy into a climate-neutral and circular economy. Business-to-government information- sharing arrangements play an essential role in monitoring compliance with these regulatory measures. To this end data from the supply chain of products needs...conference paper 2023
- document
-
Panasiuk, Daryna (author), Daigo, Ichiro (author), Hoshino, Takeo (author), Hayashi, Hideo (author), Yamasue, Eiji (author), Tran, Duc Huy (author), Sprecher, Benjamin (author), Shi, Feng (author), Shatokha, Volodymyr (author)The accumulation of impurities in the recycling of steel impacts the quality of secondary steel. Understanding impurity levels is crucial in the context of the proliferation of circular economy policies, expected high recycling rates, and growth of scrap consumption. By assuming the accumulation of impurities to be equal worldwide, the...journal article 2022
- document
-
van Lieshout, P.S. (author)Structural geometry and stochastic loads such as swell and wind seas can typically induce multiaxial stress states in welded details of marine structures. It is known that such complex time varying stress states determine the fatigue resistance of welded steel joints. Therefore, it is of importance to account for them in fatigue lifetime...doctoral thesis 2020
- document
-
Shakerifard, B. (author)Global warming, continuous demand on energy from fossil fuels as a limited natural resource, and costumers’ high expectations regarding product quality are three global challenges that the automotive industry is facing. Fuel consumption reduction has a significant impact on preserving fossil fuels, lowering fossil fuel dependency and the CO2...doctoral thesis 2019
- document
-
Farahani, H. (author), Zijlstra, Gerrit (author), Mecozzi, M.G. (author), Ocelík, Václav (author), De Hosson, Jeff Th M. (author), van der Zwaag, S. (author)In this research, in situ high-temperature electron backscattered diffraction (EBSD) mapping is applied to record and analyze the migration of the α/3 interfaces during cyclic austenite-ferrite phase transformations in a medium manganese steel. The experimental study is supplemented with related 3D phase field (PF) simulations to better...journal article 2019
- document
-
Fang, H. (author), van der Zwaag, S. (author), van Dijk, N.H. (author)The magnetic configuration of a ferromagnetic system with mono-disperse and poly-disperse distribution of magnetic particles with inter-particle interactions has been computed. The analysis is general in nature and applies to all systems containing magnetically interacting particles in a non-magnetic matrix, but has been applied to steel...journal article 2018
- document
-
Garbatov, Y. (author), Ås, S.K. (author), Branner, Kim (author), Choi, B.K. (author), den Besten, J.H. (author), Dong, P. (author), Lillemäe, I. (author), Lindstrom, P. (author), Lourenço de Souz, M. (author), Parmentier, G. (author), Quéméner, Y. (author), Rizzo, C.M. (author), Rörup, J. (author), Vhanmane, Suhas (author), Villavicencio, R. (author), Wang, F. (author), Yuan, Yue (author)Concern for crack initiation and growth under cyclic loading as well as unstable crack propagation and tearing in the ship and offshore structures. Due attention shall be paid to the suitability and uncertainty of physical models and testing. Consideration is to be given to practical application, statistical description and fracture control...conference paper 2018
- document
-
Versteylen, C.D. (author), Szymański, N. K. (author), Sluiter, M.H.F. (author), van Dijk, N.H. (author)In recently discovered self healing creep steels, open-volume creep cavities are filled by the precipitation of supersaturated solute. These creep cavities form on the grain boundaries oriented perpendicular to the applied stress. The presence of a free surface triggers a flux of solute from the matrix, over the grain boundaries towards the...journal article 2018
- document
-
Farahani, H. (author), Xu, W. (author), van der Zwaag, S. (author)Predicting the effect of alloying elements on the degree of incomplete austenite to bainite transformation in low carbon steels is of great industrial importance. This study introduces an extended Gibbs energy balance model which makes use of an additive approach to calculate the coupled effect of Mn, Si and Mo on the fraction of bainitic...journal article 2018
- document
-
de Barros, S. (author), Teixeira De Freitas, S. (author), Banea, M.D. (author), Budhe, S. (author), Arouche, M.M. (author), dos Santos, B.L. (author)In this work, peel tests were used to assess the adhesion quality between carbon fiber reinforced polymers (CFRP) and carbon steel plates. The tests were performed according to the ASTM standard of floating roller peel tests (D3167–97) with a new specimen layup. The layup and geometry of specimens was defined in order to have the CFRP as the...conference paper 2016
- document
-
Farias Moreno, D.E. (author)Weight reduction of car bodies can be achieved by application of steel components with a lower thickness; however mechanical properties (for constructive and safety reasons) must be maintained, which can be achieved by using (U)HSS steels. These steels have been designed and optimized for improved mechanical behavior and therefore normally have...doctoral thesis 2014
- document
-
Tirumalasetty, G.K. (author), Fang, C.M. (author), Jansen, J. (author), Yokosawa, T. (author), Boeije, M.J.F. (author), Sietsma, J. (author), Van Huis, M.A. (author), Zandbergen, H.W. (author)Chromium (Cr), Manganese (Mn), and Carbon (C) are well known alloying elements used in technologically important alloy steels and advanced high strength steels. It is known that binary CrCx and MnCx carbides can be formed in steels, but in this study we reveal for the first time that Cr and Mn were found combined in novel ternary cementite type ...journal article 2014
- document
-
Koleva, D.A. (author), Jonkers, H.M. (author), van Breugel, K. (author)The improvement of material properties of cement-based materials e.g. reduced permeability, porosity, uniform distribution of hydration products, etc. is of a significant importance and related to durability and sustainability of concrete and reinforced concrete structures. With this respect, a recent and novel approach is to "create" self...journal article 2013
- document
-
Santillana, M.B. (author)Nowadays a vast majority of the steel produced worldwide is via the continuous casting process route because this is the most low-cost, efficient and high quality method to mass produce metal products in a variety of sizes and shapes. Most of the continuous casters are the initial manufacturing step of a product which is very close to the final...doctoral thesis 2013
- document
-
Chen, H. (author)Mechanical properties of low alloyed steels are directly determined by their microstructures. Thanks to versatility in their microstructures, the mechanical properties of low alloyed steels are much more adjustable than other materials. In the industry, one of the most effective ways to obtain the microstructure for the targeted mechanical...doctoral thesis 2013
- document
-
Langelaan, G. (author), Zhang, S. (author), Brück, E. (author), Van der Zwaag, S. (author), Van Dijk, N.H. (author)Abstract only.conference paper 2013
- document
-
Van Heel, D.D. (author), Maas, T. (author), De Gijt, J.G. (author), Said, M. (author)This paper describes quay wall and bridge designs in different materials, which are compared with regard the the CO2-emission and the Life Cycle Analysis (LCA). For this study the requirements and boundary conditions from the Euromax Terminal quay wall, in the Port of Rotterdam, have been used. The preliminary designs of the quay wall (made...conference paper 2011
- document
- Van Dijk, N.H. (author), He, S. (author), Paladugu, M. (author), Schut, H. (author), Van der Zwaag, S. (author) conference paper 2011
- document
-
Van der Aa, E.M. (author)One of the major problems during welding of thin plate structures is the occurrence of buckling distortion. This type of distortion is caused by the formation of compressive welding stresses; when these stresses exceed a certain critical stress level, the structure will buckle. Most methods for eliminating the welding induced buckling distortion...doctoral thesis 2007
- document
-
Koleva, D.A. (author), De Wit, J.H.W. (author), Van Breugel, K. (author), Lodhi, Z.F. (author), Van Westing, E. (author)The electrochemical behavior of steel reinforcement in conditions of corrosion and cathodic protection was studied, using electrochemical impedance spectroscopy (EIS) and compared to reference (noncorroding) conditions. Polarization resistance (PR) method and potentiodynamic polarization (PDP) were employed as well, in addition to ac 2 pin...journal article 2007
Pages
- 1
- 2