- document
-
Bufalari, G. (author), den Besten, J.H. (author), Kaminski, M.L. (author)The response of maritime structures can be multiaxial, involving predominant mode-I and non-negligible mode-III components. Adopting a stress distribution formulation based effective notch stress as fatigue strength parameter for mixed mode-{I, III} multiaxial fatigue assessment purposes, a mode-I equivalent von Mises type of failure...journal article 2024
- document
-
Schrijvershof, Pim (author), Rahimi, A. Masie (author), Leone, Nicola (author), Bloemendaal, Alexander (author), Daams, Freek (author), Arezzo, Alberto (author), Mintz, Yoav (author), Horeman, T. (author)Surgeons performing robotic-assisted laparoscopic surgery experience physical stress and overuse of shoulder muscles due to sub-optimal arm support during surgery. The objective is to present a novel design and prototype of a dynamic arm support for robotic laparoscopic surgery to evaluate its ergonomics and performance on the AdLap-VR...journal article 2024
- document
-
Yao, Liaojun (author), Wang, Jiexiong (author), He, Yonglyu (author), Zhao, Xiuhui (author), Chen, Xiangming (author), Liu, J. (author), Guo, Licheng (author), Alderliesten, R.C. (author)Fatigue delamination growth (FDG) is an important failure in composite structures during their long-term operations. Hygrothermal aging can have significant effects on interlaminar resistance. It is therefore really necessary to explore FDG behavior in composite laminates with hygrothermal aging. Dynamic mechanical thermal analysis (DMTA),...journal article 2024
- document
-
Janssen, M. (author), Zuidema, J (author), Wanhill, R.J.H. (author)In this second edition, which is the result of numerous revisions, updates and additions, the authors cover the basic concepts of fracture mechanics for both the linear elastic and elastic-plastic regimes. The fracture mechanics parameters K, G, J and CTOD are treated in a basic manner along with the test methods to determine critical values....book 2024
- document
-
Leciñana, I. (author), Renart, J. (author), Carreras, L. (author), Turon, A. (author), Zurbitu, J. (author), Tijs, B.H.A.H. (author)The main objective of this paper is to present a delamination benchmark test concept for composite materials that develop non-self-similar delamination in characterization specimens. The non-self-similar delamination is induced by rotating the loading blocks. The simplicity of the test allows for analyzing the loading mode history by...journal article 2024
- document
-
Khoshmanesh, S. (author), Watson, S.J. (author), Zarouchas, D. (author)Wind turbine blades carry the risk of impact damage during transportation, installation, and operation. Such impacts can cause levels of damage that can propagate throughout the structure compromising performance and safety. In this study, the effect of impact damage on fatigue damage propagation in test specimens representative of a spar cap...journal article 2024
- document
-
Gomez, A. (author), Banis, A. (author), Avella, M. (author), Molina-Aldareguia, J. M. (author), Petrov, R.H. (author), Dutta, A. (author), Sabirov, I. (author)Numerous studies have demonstrated the viability of lightweight Fe-Mn-Al-C steels for exhibiting an improved balance of high strength and high ductility in automotive applications. However, their high-cycle fatigue behaviour has been scarcely studied. This work examines the effect of κ-carbides formed during the aging treatment on the high...journal article 2024
- document
-
Gan, Yidong (author), Liang, M. (author), Schlangen, E. (author), van Breugel, K. (author), Šavija, B. (author)This study employs a lattice fracture model to simulate static and fatigue fracture behaviour of Interfacial Transition Zone (ITZ) at microscale and mortar at mesoscale. The heterogeneous microstructure of ITZ and mesostructure of mortar are explicitly considered in the models. The initial step involves calibrating and validating the...journal article 2024
- document
-
Pascoe, J.A. (author), Tu, W. (author), Biagini, D. (author), Alderliesten, R.C. (author)Fibre reinforced polymer composites have found increasing use in aircraft structures. This means that fleet managers need damage assessment tools for such materials, in order to decide on appropriate sustainment strategies. Developing such tools is hindered by the difficulty of generalising from lab tests to predict the behaviour of full-scale...conference paper 2023
- document
-
Biagini, D. (author), Pascoe, J.A. (author), Alderliesten, R.C. (author)Impacts on carbon fiber reinforced composites (CFRP) can produce a complex internal damage comprising multiple delaminations, which is hard to detect from visual inspection. This situation is known as barely visible impact damage (BVID). Considering that every airplane faces several impacts during its operational life, and that the majority of...conference paper 2023
- document
-
Galanopoulos, Georgios (author), Milanoski, Dimitrios (author), Eleftheroglou, N. (author), Broer, Agnes A.R. (author), Zarouchas, D. (author), Loutas, Theodoros (author)An increasing interest for Structural Health Monitoring has emerged in the last decades. Acoustic emission (AE) is one of the most popular and widely studied methodologies employed for monitoring, due to its capabilities of detecting, locating and capturing the evolution of damage. Most literature so far, has employed AE for characterizing...journal article 2023
- document
-
Ashcroft, Ian (author), Pascoe, J.A. (author)The fatigue behavior of an adhesively bonded joint is of key importance to its long-term structural integrity. However, the complex stress distribution inside a bonded joint does not make it easy to evaluate the fatigue behavior. This chapter discusses the various approaches that have been developed for predicting the fatigue behavior of...book chapter 2023
- document
-
Pascoe, J.A. (author)This article presents an overview of methods for analyzing the facture and failure of adhesives. Special attention is given to stress analysis in adhesive bonds, as the difficulty of performing an accurate stress analysis is a major limitation of many failure analysis methods. The article also covers the effect of manufacturing and...book chapter 2023
- document
-
Li, X. (author), Benedictus, R. (author), Zarouchas, D. (author)The present work aims at understanding the stochastic matrix crack evolution in CFRP cross-ply laminates under tension–tension fatigue loading. An experimental campaign was carried out on twenty-three specimens at different stress levels, while two optical techniques were used for the in-situ monitoring of the accumulation of transverse...journal article 2023
- document
-
Biagini, D. (author), Pascoe, J.A. (author), Alderliesten, R.C. (author)In previous literature, a plateau phase in fatigue growth of impact delamination projected area in CFRP was found. Explaining this plateau phase still represents a knowledge gap. In the present work, echo-pulse and through thickness transmission ultrasonic scan inspections were combined with acoustic emission monitoring to explain this...journal article 2023
- document
-
Khoshmanesh, S. (author), Watson, S.J. (author), Zarouchas, D. (author)In this paper, a new indicator to localize fatigue damage in a fibre glass composite structure, i.e. spar cap to shear web thick adhesive joint of a wind turbine blade, is presented. This indicator is based on the effect of damping on the phase of the mode shapes of the structure. When fatigue damage occurs, damping increases in the defective...journal article 2023
- document
-
Paz Mendez, J. (author), Raimondo, A. (author), Bisagni, C. (author)This study aims at better understanding the damage tolerance of stiffened composite panels subjected to fatigue loads in the post-buckling regime. Ten single-stringer hat-stiffened specimens with an initial delamination between the skin and the stringer foot were manufactured, and then tested under quasi-static and fatigue loads in post...journal article 2023
- document
-
Li, X. (author)Fatigue damage of composite laminates has attracted considerable attention from research community and industry, in view that laminated structures are inevitable to suffer from fatigue loading during their service life. It is rather complicated to understand and explain, what governs the initiation, accumulation, interaction (synergy or...doctoral thesis 2022
- document
-
Tieleman, O.C. (author)Flood gates form an essential part of many flood defence systems in coastal areas. During storm events, these gates are subjected to extreme loads from various sources. This dissertation addresses the dynamic behaviour of flood gates induced by wave impacts. A semi-analytical fluid-structure interaction model is developed to predict vertical...doctoral thesis 2022
- document
-
Smeets, E.T.B. (author), Rans, C.D. (author), Alderliesten, R.C. (author), Castro, Saullo G.P. (author), Villegas, I.F. (author)Ultrasonic spot welding is a joining technique for thermoplastic composites with great potential regarding processing speed and cost. To investigate the damage tolerance and possible inherent damage arresting behavior of multi-spot welded joints, a technique is necessary to measure damage growth in the joints under cyclic loading. Visual...conference paper 2022