Searched for:
(1 - 20 of 84,984)

Pages

document
Wu, P. (author)
The European Union and the United States are proposing to bring in more strict flight vehicle emission criteria in their reports of the high‐level groups on aviation research, i.e. EU Flightpath 2050 and US Destination 2025. More fuel‐efficient aircraft must be developed to achieve this target. Moreover, the increasingly competitive aviation...
doctoral thesis 2109
document
Khakzad Rostami, N. (author)
System safety and reliability assessment relies on historical data and experts opinion for estimating the required failure probabilities. When data comes from different sources, be it different databases or subject domain experts, the estimation of accurate probabilities would be very challenging, if not impossible, and subject to high epistemic...
journal article 2019
document
Soleymani Shishvan, M. (author), Benndorf, J. (author)
This paper examines a problem related to dispatching materials to spreaders in coal (lignite) mines operated under the paradigm of continuously excavated material flow. In the considered particular case, complexity arises from different material types of overburden to be placed on the dump site in pre-defined patterns that guarantee...
journal article 2019
document
Turteltaub, S.R. (author), de Jong, Gijs (author)
A multiscale fracture model is developed to study the influence of defects appearing at a microscale in a fiber-reinforced composite laminate. The model establishes a link between the geometrical characteristics of sub-ply imperfections that may be created during manufacturing and the overall fracture strength and fracture energy of the...
journal article 2019
document
Liu, Faqi (author), Yang, Hua (author), Yan, R. (author), Wang, Wei (author)
The behaviour of square steel tube confined reinforced concrete columns after fire exposure was studied experimentally and numerically in this paper. Eighteen stub columns were first heated following the ISO 834 standard fire including both heating and cooling phases, and were subsequently loaded to failure after cooling to ambient temperature....
journal article 2019
document
Tsoy, Natalya (author), Prado, Valentina (author), Wypkema, Aike (author), Quist, J.N. (author), Mourad, Maurice (author)
Environmental analysis should be performed early in the Research and Development (R&D) phases of new technologies to timely determine potential impact and, thereby, include prevention and minimization of unfavorable ecological impact into the innovation process. Here, we demonstrate the application of anticipatory Life Cycle Assessment ...
journal article 2019
document
Jing, Guoqing (author), Qie, Luchao (author), Markine, V.L. (author), Jia, J. (author)
During the development for railway, ballasted track is dominant structure and makes up more than 95% of the whole track modes. However, its shortage is considerable in high speed railway and heavy haul system. Regarding to the ballasted railway track's defects as particle breakage, settlement, and geometry irregularity which lead to enormous...
review 2019
document
Ploussard, Q. (author)
The aim of Transmission Expansion Planning (TEP) studies is to decide which, where, and when new grid elements should be built in order to minimize the total system cost. The lumpiness of the investment decisions, together with the large size of the problem, make the problem very hard to solve. Consequently, methods should be put in place to...
doctoral thesis 2019
document
Walraven, E.M.P. (author)
Developing intelligent decision making systems in the real world requires planning algorithms which are able to deal with sources of uncertainty and constraints. An example can be found in smart distribution grids, in which planning can be used to decide when electric vehicles charge their batteries, such that the capacity limits of lines are...
doctoral thesis 2019
document
Heidary Shalmany, S. (author)
Coulomb counting is a widely used method to estimate battery state-of-charge (SoC). It involves measuring and integrating the battery’s current to determine its net charge flow.
doctoral thesis 2019
document
Bliek, L. (author)
Beamforming is a signal processing technique used in highly directional antennas. An array of antenna elements transmits the same signal, but with a different time delay for each element. By providing the right time delays for each antenna element, the whole array transmits a high-powered signal in one desired direction. This technique can be...
doctoral thesis 2019
document
Smits, J.E.P. (author)
It is hard to imagine a world without bridges. Bridges lie at the heart of our civilization bringing growth and prosperity to our society. It is by virtue of bridges that communities are able to physically connect to new people and to new places that were previously disconnected. However, bridges are more than mere functional assets. A well...
doctoral thesis 2019
document
Yu, C. (author)
The Newton-Raphson method (N-R) has been widely used in nonlinear FEM analysis of quasi brittle materials, such as masonry, concrete and reinforced and prestressed concrete. However, the robustness of the N-R method is still a serious issue when bifurcation, snap-back or divergence problems arise. In order to enhance the robustness of solving...
doctoral thesis 2019
document
Zheng, Z. (author)
With the rising demands from customers and users and the development of ever advanced technologies, many space missions nowadays require more than one satellite to fulfill their mission objectives. Although replacing single satellite systems (SSSs) by multiple satellite systems (MSSs) offers advantages, such as enhanced spatial and temporal...
doctoral thesis 2019
document
Saraiva-Okello, A.M.L. (author)
This study aims at improving the hydrological process understanding of the semi-arid and transboundary Incomati river basin to enable better water management. Comprehensive statistical and trend analysis of rainfall and streamflow were conducted, and the Indicators of Hydrological Alteration tool was deployed to describe the streamflow regime...
doctoral thesis 2019
document
Sánchez-Arriaga, Gonzalo (author), Pastor-Rodríguez, Alejandro (author), Sanjurjo-Rivo, Manuel (author), Schmehl, R. (author)
A parallelized flight simulator for the dynamic analysis of airborne wind energy (AWE) systems for ground- and fly-generation configurations is presented. The mechanical system comprises a kite or fixed-wing drone equipped with rotors and linked to the ground by a flexible tether. The time-dependent control vector of the simulator mimics real...
journal article 2019
document
Homulle, Harald (author)
Quantum computing promises an exponential speed-up of computation compared to what is nowadays achievable with classical computers. In this way, it enables the evaluation of more complex models and the breaching of current security algorithms. For the operation of a quantum system, many questions remain to be answered. Currently, there are...
doctoral thesis 2019
document
Jaxa-Rozen, M. (author), Kwakkel, J.H. (author), Bloemendal, J.M. (author)
The modelling of social-ecological systems can provide useful insights into the interaction of social and environmental processes. However, quantitative social-ecological models should acknowledge the complexity and uncertainty of both underlying subsystems. For example, the agent-based models which are increasingly popular for groundwater...
journal article 2019
document
Bruijn, Willem E.L. (author), Rip, Jolien (author), Hendriks, Antoon J.H. (author), van Gelder, P.H.A.J.M. (author), Jonkman, Sebastiaan N. (author)
A marine project consists of series of operations, with each operation subject to a predefined operational limit and duration. If actual weather conditions exceed the operational limit, the operation cannot be executed and hence downtime occurs. An accurate assessment of uncertainties and the expected downtime during a marine project is...
journal article 2019
document
Parayil Venugopalan, S. (author)
doctoral thesis 2019
Searched for:
(1 - 20 of 84,984)

Pages