Searched for: +
(1 - 20 of 106)

Pages

document
Langelaar, Matthijs (author)
The potential of topology optimization to amplify the benefits of additive manufacturing (AM), by fully exploiting the vast design space that AM allows, is widely recognized. However, existing topology optimization approaches do not consider AM-specific limitations during the design process, resulting in designs that are not self-supporting....
journal article 2016
document
Hedayati, R. (author), Sadighi, M. (author)
Today, interconnected open-cell porous structures made of titanium and its alloys are replacing the prevalent solid metals used in bone substitute implants. The advent of additive manufacturing techniques has enabled manufacturing of open-cell structures with arbitrary micro-structural geometry. In this paper, rhombic dodecahedron structures...
journal article 2016
document
Hedayati, R. (author), Hosseini-Toudeshky, H (author), Sadighi, M. (author), Mohammadi-Aghdam, M. (author), Zadpoor, A.A. (author)
The mechanical behavior of additively manufactured porous biomaterials has recently received increasing attention. While there is a relatively large body of data available on the static mechanical properties of such biomaterials, their fatigue behavior is not yet well-understood. That is partly because systematic study of the fatigue behavior...
journal article 2016
document
Langelaar, Matthijs (author)
Additive manufacturing (AM) offers exciting opportunities to manufacture parts of unprecedented complexity. Topology optimization is essential to fully exploit this capability. However, AM processes have specific limitations as well. When these are not considered during design optimization, modifications are generally needed in post...
journal article 2017
document
Hedayati, R. (author), Janbaz, S. (author), Sadighi, M. (author), Mohammadi-Aghdam, M. (author), Zadpoor, A.A. (author)
Although the initial mechanical properties of additively manufactured porous biomaterials are intensively studied during the last few years, almost no information is available regarding the evolution of the mechanical properties of implant-bone complex as the tissue regeneration progresses. In this paper, we studied the effects of tissue...
journal article 2017
document
van Hengel, I.A.J. (author), Riool, Martijn (author), Fratila-Apachitei, E.L. (author), Witte-Bouma, Janneke (author), Farrell, Eric (author), Zadpoor, A.A. (author), Zaat, Sebastian A.J. (author), Apachitei, I. (author)
Additively manufactured Ti-6Al-4V implants were biofunctionalized using plasma electrolytic oxidation. At various time points during this process scanning electron microscopy imaging was performed to analyze the surface morphology (van Hengel et al., 2017) [1]. This data shows the changes in surface morphology during plasma electrolytic...
journal article 2017
document
Hedayati, R. (author), Sadighi, M (author), Mohammadi-Aghdam, M (author), Zadpoor, A.A. (author)
Additively manufacturing (AM) techniques make it possible to fabricate open-cell interconnected structures with precisely controllable micro-architectures. It has been shown that the morphology, pore size, and relative density of a porous structure determine its macro-scale homogenized mechanical properties and, thus, its biological performance...
journal article 2017
document
Hedayati, R. (author), Amin Yavari, S. (author), Zadpoor, A.A. (author)
Additively manufactured porous titanium implants, in addition to preserving the excellent biocompatible properties of titanium, have very small stiffness values comparable to those of natural bones. Although usually loaded in compression, biomedical implants can also be under tensional, shear, and bending loads which leads to crack initiation...
journal article 2017
document
van de Ven, E.A. (author), Verboom, J.M. (author), Ayas, C. (author), Langelaar, Matthijs (author), Maas, Robert (author), van Keulen, A. (author)
abstract 2017
document
Yang, Y. (author), Ayas, C. (author), van Keulen, A. (author)
abstract 2017
document
Yang, Y. (author), Ayas, C. (author), van Keulen, A. (author)
abstract 2017
document
Munro, D.P. (author), Ayas, C. (author), Langelaar, Matthijs (author), van Keulen, A. (author)
abstract 2017
document
Langelaar, Matthijs (author)
abstract 2017
document
Li, Y. (author), Zhou, J. (author), Pavanram, P. (author), Leeflang, M.A. (author), Fockaert, L.I. (author), Pouran, B. (author), Tümer, N. (author), Schröder, K. U. (author), Mol, J.M.C. (author), Weinans, Harrie (author), Jahr, H. (author), Zadpoor, A.A. (author)
An ideal bone substituting material should be bone-mimicking in terms of mechanical properties, present a precisely controlled and fully interconnected porous structure, and degrade in the human body to allow for full regeneration of large bony defects. However, simultaneously satisfying all these three requirements has so far been highly...
journal article 2017
document
Hakkaart, X.D.V. (author), Pronk, J.T. (author), van Maris, A.J.A. (author)
Understanding microbial growth and metabolism is a key learning objective of microbiology and biotechnology courses, essential for understanding microbial ecology, microbial biotechnology and medical microbiology. Chemostat cultivation, a key research tool in microbial physiology that enables quantitative analysis of growth and metabolism under...
journal article 2017
document
Sauerwein, M. (author), Bakker, C.A. (author), Balkenende, R. (author)
Circular product design is a relatively new approach to design suitable strategies to realize circular products. Additive manufacturing (AM) is seen as a promising enabling production process. It has digital and additive characteristics, which makes AM different from conventional production techniques. However, it is yet unclear how this...
conference paper 2017
document
Wu, J. (author), Clausen, Anders (author), Sigmund, Ole (author)
Additively manufactured parts are often composed of two sub-structures, a solid shell forming their exterior and a porous infill occupying the interior. To account for this feature this paper presents a novel method for generating simultaneously optimized shell and infill in the context of minimum compliance topology optimization. Our method...
journal article 2017
document
Hedayati, R. (author), Sadighi, M. (author), Mohammadi-Aghdam, M (author), Hosseini-Toudeshky, H (author)
Additive manufacturing techniques have made it possible to create open-cell porous structures with arbitrary micro-geometrical characteristics. Since a wide range of micro-geometrical features is available for making an implant, having a comprehensive knowledge of the mechanical response of cellular structures is very useful. In this study,...
journal article 2018
document
Li, Y. (author), Han, Qinglin (author), Zhang, Guangjun (author), Horvath, I. (author)
Robotic wire and arc additive manufacturing (WAAM) systems are required to provide predictable and efficient operations to fabricate solid metallic parts with high morphological fidelity and geometric accuracy. Since the metallic parts are fabricated based on a layer-by-layer principle, the interactions between the neighboring beads and...
journal article 2018
document
Liu, Jikai (author), Gaynor, Andrew T. (author), Chen, Shikui (author), Kang, Zhan (author), Suresh, Krishnan (author), Takezawa, Akihiro (author), Li, Lei (author), Kato, Junji (author), Tang, Jinyuan (author), Wang, C.C. (author), Cheng, Lin (author), Liang, Xuan (author), To, Albert. C. (author)
Manufacturing-oriented topology optimization has been extensively studied the past two decades, in particular for the conventional manufacturing methods, for example, machining and injection molding or casting. Both design and manufacturing engineers have benefited from these efforts because of the close-to-optimal and friendly-to-manufacture...
journal article 2018
Searched for: +
(1 - 20 of 106)

Pages