Pages
- 1
- 2
- document
-
Aravind, P.V. (author), Liu, M. (author), Fan, L. (author), Promes, E.J.O. (author), Giraldo, S.Y. (author), Woudstra, T. (author)An overview of the research activities and on-going multiple projects at Delft University of Technology aimed at the development of Gasifier–Solid Oxide Fuel Cell (SOFC) based power plants are presented. Biosyngas generated in gasifiers consists of a mixture of carbon monoxide (CO), carbon dioxide (CO2), methane (CH4), hydrogen (H2), nitrogen ...journal article 2013
- document
-
Yang, Ning (author), Yang, Daoguo (author), Zhang, Kouchi (author), Chen, Liangbiao (author), Liu, Dongjing (author), Cai, Miao (author), Fan, Xuejun (author)The effects of graphene stacking are investigated by comparing the results of methane adsorption energy, electronic performance, and the doping feasibility of five dopants (i.e., B, N, Al, Si, and P) via first-principles theory. Both zigzag and armchair graphenes are considered. It is found that the zigzag graphene with Bernal stacking has...journal article 2018
- document
-
Monteiro Fernandes, A.B. (author), Brabandt, Joerg (author), Posdziech, Oliver (author), Saadabadi, S.A. (author), Recalde Moreno Del Rocio, M.D.R. (author), Fan, L. (author), Promes, E.J.O. (author), Liu, M. (author), Woudstra, T. (author), Aravind, P.V. (author)This paper describes the steps involved in the design, construction, and testing of a gasifier-specific solid oxide fuel cell (SOFC) system. The design choices are based on reported thermodynamic simulation results for the entire gasifier- gas cleanup-SOFC system. The constructed SOFC system is tested and the measured parameters are compared...journal article 2018
- document
-
Liu, Yang (author), Zhang, H. (author), Wang, Lingen (author), Fan, Xuejun (author), Zhang, Kouchi (author), Sun, Fenglian (author)The microstructure, thickness, porosity, and shear performance of the silver (Ag) sintering layers under different sintering pressures were investigated. Experimental results demonstrated that the thickness and the porosity of the sintering layer decreased when the sintering pressure varied from 5 MPa to 30 MPa. This densification phenomenon...journal article 2018
- document
-
Zhang, H. (author), Liu, Yang (author), Wang, Lingen (author), Fan, Jiajie (author), Fan, Xuejun (author), Sun, Fenglian (author), Zhang, Kouchi (author)High reliable packaging materials are needed for electronics when they work at harsh environments. Among which, the nanosilver material has been widely studied and applied in power electronics due to its low processing temperature and high reliability. This paper investigates the bonding properties of nanosilver sintered hermetic cavity. There...journal article 2018
- document
-
Zhang, H. (author), Liu, Y. (author), Wang, Lingen (author), Sun, Fenglian (author), Fan, Jiajie (author), Placette, Mark D. (author), Fan, Xuejun (author), Zhang, Kouchi (author)Modern power electronics has the increased demands in current density and high-temperature reliability. However, these performance factors are limited due to the die attach materials used to affix power dies microchips to electric circuitry. Although several die attach materials and methods exist, nanosilver sintering technology has received...journal article 2019
- document
-
Liu, Y. (author), Zhang, H. (author), Wang, Lingen (author), Fan, Xuejun (author), Zhang, Kouchi (author), Sun, Fenglian (author)Purpose: Crack and stress distribution on dies are key issues for the pressure-assisted sintering bonding of power modules. The purpose of this research is to build a relationship among stress distributions, sintering sequences and sintering pressures during the sintering processes. Design/methodology/approach: Three sintering sequences, S(a)...journal article 2019
- document
-
Ren, S. (author), Liu, X. (author), Fan, Weiyu (author), Wang, H. (author), Erkens, S. (author)A styrene-butadiene-styrene (SBS) latex modifier can be used for asphalt modification due to the fact of its energy-saving, construction convenience, and economic advantages. The objective of this study was to investigate the influence of asphalt type and SBS latex dosage on the rheological properties, compatibility, and storage stability of...journal article 2019
- document
-
Zhang, H. (author), Liu, Y. (author), Wang, Lingen (author), Sun, Fenglian (author), Fan, Xuejun (author), Zhang, Kouchi (author)The nanoindentation test was conducted in this paper to investigate the indentation hardness, plasticity and initial creep properties of pressure sintered nanosilver joint at various test temperatures. The effects of strain rate on the indentation hardness were first investigated. Then yield stress of nanosilver sintered joint was studied in...journal article 2019
- document
-
Hou, F. (author), Zhang, Hengyun (author), Huang, Dezhu (author), Fan, J. (author), Liu, Fengman (author), Lin, Tingyu (author), Cao, Liqiang (author), Fan, Xuejun (author), Ferreira, Braham (author), Zhang, Kouchi (author)In this article, a microchannel thermal management system (MTMS) with the two-phase flow using the refrigerant R1234yf with low global warming potential is presented. The thermal test vehicles (TTVs) were made of either single or multiple thermal test chips embedded in the substrates, which were then attached to the MTMS. The system included...journal article 2020
- document
-
Fan, B. (author), Zhang, K. (author), Liu, Q. (author), Eelkema, R. (author)Introduction of dynamic thiol-alkynone double addition cross-links in a polymer network enable the formation of a self-healing injectable polymer hydrogel. A four-arm polyethylene glycol (PEG) tetra-thiol star polymer is cross-linked by a small molecule alkynone via the thiol-alkynone double adduct to generate a hydrogel network under ambient...journal article 2020
- document
-
Ren, S. (author), Liu, X. (author), Li, Mingliang (author), Fan, Weiyu (author), Xu, Jian (author), Erkens, S. (author)It is well known that crumb rubber (CR) and styrene–butadienestyrene (SBS) composite modified asphalt has better rheological and engineering performance. However, it always presents very poor compatibility and storage stability. Meanwhile, Trans-polyoctenamer (TOR) can effectively improve the compatibility and thermal stability of rubber...journal article 2020
- document
-
Liu, Y. (author), van der Meer, F.P. (author), Sluys, Lambertus J. (author), Fan, J. T. (author)With a classical notched configuration, the damage process in the transverse plane of fiber-reinforced polymer composites are studied by a direct numerical simulation model (DNS). However, to avoid high computational costs the region in which the fiber/matrix microstructure is explicitly modeled must remain small. Therefore, away from the...journal article 2020
- document
-
Ren, S. (author), Liu, X. (author), Wang, H. (author), Fan, Weiyu (author), Erkens, S. (author)Recycling technology is widely used in the asphalt road construction due to its environmental and economic effects. Many efforts have focused on the performance restoration of aged base asphalt by adding light oil, but the possibility of recycling the aged asphalt using low-viscosity asphalt and polymers has been few explored. Therefore, the...journal article 2020
- document
-
Huang, Xinxing (author), Li, Yifan (author), Tian, Zhan (author), Ye, Qinghua (author), Ke, Q. (author), Fan, Dongli (author), Mao, Ganquan (author), Chen, Aifang (author), Liu, Junguo (author)Efficient and accurate streamflow predictions are important for urban water management. Data-driven models, especially neural network (NN) models can predict streamflow fast, while the results are uncertain in some complex river systems. Physically based models can reveal the underlying physics, but it is relatively slow and computationally...journal article 2021
- document
-
Ren, S. (author), Liu, X. (author), Lin, P. (author), Wang, H. (author), Fan, W. (author), Erkens, S. (author)The chemo-rheological properties of crumb rubber modified bitumen are always unstable due to the mutable and uncontrollable swelling-degradation degree of crumb rubber in bitumen matrix. The study aimed at exploring the continuous swelling and degradation behaviors of crumb rubber modified bitumen (CRMB) considering the influence of rubber size...journal article 2021
- document
-
Ma, Bingtao (author), Liu, Hongsen (author), Nan, L. (author), Tang, Xu (author), Fan, Huijie (author), Cong, Yang (author)The 3D mesh is an important representation of geometric data. It is widely used in computer graphics and has attracted more attention in computer vision community recently. However, in the generation of mesh data, geometric deficiencies (e.g., duplicate elements, degenerate faces, isolated vertices, self-intersection, and inner faces) are...conference paper 2021
- document
-
Li, Shizhen (author), Liu, Yang (author), Ye, H. (author), Liu, X. (author), Sun, Fenglian (author), Fan, Xuejun (author), Zhang, Kouchi (author)This paper studied the behaviors of sintering between Ag nanoparticle (NP) and nanoflake (NF) in the same size by molecular dynamics simulation. Before the sintering simulation, the melting simulation of NF was carried out to calculate the melting points of NFs and investigate the thermostability of NF. The Lindemann index and potential...journal article 2022
- document
-
Mao, Pengcheng (author), Fan, Huilin (author), Liu, Chang (author), Lan, Gongxu (author), Huang, Wei (author), Li, Zhipeng (author), Amin Hassan, H.M. (author), Zheng, Runguo (author), Wang, Zhiyuan (author), Sun, Hongyu (author), Liu, Yanguo (author)Thanks to the low cost and earth's abundant potassium resources, potassium ion batteries (PIBs) have attracted much interest as alternative energy storage devices. However, there is still a great challenge to develop suitable anode materials for PIBs with high specific capacity, fast charge/discharge and stable ion storage. Nowadays,...journal article 2022
- document
-
Li, Mingliang (author), Ren, S. (author), Liu, X. (author), Wu, Zhe (author), Zhang, Haopeng (author), Fan, Weiyu (author), Lin, P. (author), Xu, Jian (author)This study aims to comprehensively investigate the rejuvenation efficiency of various self-developed compound rejuvenators on the physical, mechanical, and aging properties of aged bitumen, asphalt mortar, and mixture. The results revealed that the restoration capacity of vacuum distilled-oil rejuvenators on high-and-low temperature performance...journal article 2022
Pages
- 1
- 2