Increasing the Feasibility of Superconducting Generators for 10 MW Direct-Drive Wind Turbines

In recent years, superconducting synchronous generators (SCSGs) have been proposed as an alternative to permanent magnet synchronous generators (PMSGs). They are expected to reduce the top head mass and the nacelle size for such large wind turbines. In 2012, the INNWIND.EU project initiated this research to investigate SCSGs for 10-20MWdirect...

Performance of Multi-Layer and Stator-Shifting Fractional-Slot Concentrated Windings for Superconducting Wind Turbine Generators under Normal and Short-Circuit Operation Conditions

High temperature superconducting (HTS) generators are being considered for large offshore direct-drive (DD) wind turbines as they are expected to be lightweight and compact. However, short circuit torques of an HTS generator with integral-slot distributed windings (ISDWs) are too high for wind turbine constructions, mainly due to the large...

Design Considerations and Short-Circuit Characteristics of Fully Superconducting Wind Turbine Generators

Compared with partially superconducting generators, fully superconducting generators (F-SCGs) can further increase the torque density in large direct-drive wind turbine applications. Design trends of F-SCGs intend to increase the electrical loading by applying superconducting wires and boost the current density in the armature winding to meet...

Investigation into Multi-Phase Armature Windings for High-Temperature Superconducting Wind Turbine Generators

High-Temperature superconducting (HTS) generators are being considered as a competitive candidate in large direct-drive (DD) wind turbines because of their features of being lightweight and compact. Normally a large air gap is inevitable in partially HTS generators, sacrificing the torque producing capability. In this paper, multi-phase...

Short-circuit characteristics of superconducting permanent magnet generators for 10 MW wind turbines

Superconducting permanent magnet generators (SCPMGs) are a potential candidate for 10 MW direct-drive wind turbine applications. This paper presents two 10 MW SCPMG designs using MgB<sub>2</sub> cables for the armature winding and investigates the short-circuit characteristics of the designed SCPMGs. The first part...

The Proportional Integral Notch and Coleman Blade Effective Wind Speed Estimators and Their Similarities

The estimation of the rotor effective wind speed is used in modern wind turbines to provide advanced power and load control capabilities. However, with the ever increasing rotor sizes, the wind field over the rotor surface shows a higher degree of spatial variation. A single effective wind speed estimation therefore limits the attainable...

The Immersion and Invariance Wind Speed Estimator Revisited and New Results

The Immersion and Invariance (II) wind speed estimator is a powerful and widely-used technique to estimate the rotor effective wind speed on horizontal axis wind turbines. Anyway, its global convergence proof is rather cumbersome, which hinders the extension of the method and proof to time-delayed and/or uncertain systems. In this letter, we...