Searched for:
(1 - 20 of 503)

Pages

document
Zhang, Y. (author)
Among all the contributors to fatal accidents, in-flight loss of control (LOC-I) remains one of the largest categories, as indicated by statistics of investigations into past civil aircraft accidents. In flight LOC generally refers to accidents in which the flight crew was unable to maintain control of the aircraft in flight, resulting in an...
doctoral thesis 2019
document
Zhang, T. (author)
Patients with colorectal cancer are frequently presented with liver metastases for which (partial) resection is often the best therapy. However, the future remnant liver, the remaining part of the liver after resection, should allow adequate liver function to avoid liver failure. This thesis presents novel methods for the accurate voxel-wise...
doctoral thesis 2019
document
Zhang, Z. (author)
Saltwater intrusion is a crucial issue in estuaries. The spread of salinity is described by the dispersion coefficient. A purely empirical equation which links the effective tidal average dispersion to the freshwater discharge was developed by Van der Burgh [1972]. Combining it with the salt balance equation, Savenije [1986] derived a one...
doctoral thesis 2019
document
Xu, Y. (author), Zhang, H. (author), Šavija, B. (author), Chaves Figueiredo, S. (author), Schlangen, E. (author)
A method is presented to model deformation and fracture behavior of 3D printed disordered lattice materials under uniaxial tensile load. A lattice model was used to predict crack pattern and load-displacement response of the printed lattice materials. To include the influence of typical layered structures of 3D printed materials in the...
journal article 2019
document
Zhang, H. (author), Šavija, B. (author), Lukovic, M. (author), Schlangen, E. (author)
This work proposes a method for numerically investigating the fracture mechanism of cement paste at the microscale based on X-ray computed tomography and nanoindentation. For this purpose, greyscale level based digital microstructure was generated by X-ray microcomputed tomography with a resolution of 2 μm/voxel length. In addition,...
journal article 2019
document
Zhang, Chunyan (author), Liu, B. (author), Yu, Baoxing (author), Lu, Xiaopeng (author), Wei, Yong (author), Zhang, Tao (author), Mol, J.M.C. (author), Wang, Fuhui (author)
Surface pretreatment is generally applied before application of protective coatings on Mg alloys, which influences surface microstructure and electrochemical activity of the substrate and has an effect on the coating properties. The effect of various pretreatment processes (sand-blasting, grinding and polishing) on the microstructure and...
journal article 2019
document
Zhang, D. (author), Ortiz Sanchez, M.A. (author), Bluijssen, P.M. (author)
Background: It is well-known that indoor environmental quality (IEQ) in classrooms can have an effect on school children's comfort, health and performance. Unfortunately, information about the school children's perception of IEQ factors in their classrooms is still insufficient. The objective of this study was to better understand school...
journal article 2019
document
Wang, H. (author), Zhang, Yue (author), Zhang, Yi (author), Feng, Shuyin (author), Lu, Guoyang (author), Cao, Lintao (author)
Microwave heating is an encouraging heating technology for the maintenance, recycling, and deicing of asphalt pavement. To investigate the microwave heating properties of asphalt mixture, laboratory tests and numerical simulations were done and compared. Two types of Stone Mastic Asphalt (SMA) mixture samples (with basalt aggregates and steel...
journal article 2019
document
Wu, Dequan (author), Zhang, D. (author), Ye, Yuwei (author), Ma, Lingwei (author), Minhas, Badar (author), Liu, Bei (author), Terryn, H.A. (author), Mol, J.M.C. (author), Li, Xiaogang (author)
Recently, lubricant-infused surfaces (LIS) have emerged as a prominent class of surface technology for antifouling, anti-icing and anticorrosion applications. However, long-term corrosion exposure and mechanical damages may deteriorate the practical performance of LIS during application. In this study, a robust LIS was fabricated by the...
journal article 2019
document
Mehta, D. (author), Zhang, Y. (author), van Zuijlen, A.H. (author), Bijl, H. (author)
Despite advances in turbulence modelling, the Smagorinsky model remains a popular choice for large eddy simulation (LES) due to its simplicity and ease of use. The dissipation in turbulence energy that the model introduces, is proportional to the Smagorinsky constant, of which many different values have been proposed. These values have been...
journal article 2019
document
Ma, Yunjian (author), Li, Yongru (author), Willot, S.J. (author), Zhang, W. (author), Ribitsch, Doris (author), Choi, Young Hae (author), Verpoorte, Robert (author), Hollmann, F. (author), More Authors (author)
...
journal article 2019
document
Han, J. (author), Chepuri, S.P. (author), Zhang, Qunfei (author), Leus, G.J.T. (author)
Orthogonal signal-division multiplexing (OSDM) is a promising modulation scheme that provides a generalized framework to unify orthogonal frequency-division multiplexing (OFDM) and single-carrier frequency-domain equalization. By partitioning each data block into vectors, it allows for a flexible configuration to trade off resource management...
journal article 2019
document
Ramachandrappa Venkatesh, M. (author), Sachdeva, S. (author), Wei, J. (author), Bossche, A. (author), Bosma, D. (author), de Smet, L.C.P.M. (author), Sudholter, Ernst J. R. (author), Zhang, G.Q. (author)
Capacitors made of interdigitated electrodes (IDEs) as a transducer platform for the sensing of volatile organic compounds (VOCs) have advantages due to their lower power operation and fabrication using standard micro-fabrication techniques. Integrating a micro-electromechanical system (MEMS), such as a microhotplate with IDE capacitor,...
journal article 2019
document
Han, J. (author), Zhang, Lingling (author), Zhang, Qunfei (author), Leus, G.J.T. (author)
Orthogonal signal-division multiplexing (OSDM) is a generalized modulation scheme to bridge the gap between orthogonal frequency-division multiplexing (OFDM) and single-carrier frequency-domain equalization. It allows significantly more flexibility in system design; however, over doubly-selective channels, it suffers from a special signal...
journal article 2019
document
Yuan, S. (author), Zhang, Lixian (author), Baldi, S. (author)
In the presence of discontinuous time-varying delays, neither Krasovskii nor Razumikhin techniques can be successfully applied to adaptive stabilization of uncertain switched time-delay systems. This paper develops a new adaptive control scheme for switched time-delay systems that can handle impulsive behavior in both states and time-varying...
journal article 2019
document
Liu, Y. (author), Zhang, H. (author), Wang, Lingen (author), Fan, Xuejun (author), Zhang, G.Q. (author), Sun, Fenglian (author)
Purpose: Crack and stress distribution on dies are key issues for the pressure-assisted sintering bonding of power modules. The purpose of this research is to build a relationship among stress distributions, sintering sequences and sintering pressures during the sintering processes. Design/methodology/approach: Three sintering sequences, S(a)...
journal article 2019
document
Gao, Y. (author), Dong, Jianfei (author), Isabella, O. (author), Santbergen, R. (author), Tan, Hairen (author), Zeman, M. (author), Zhang, G. (author)
Dynamic photovoltaic (PV) greenhouses integrate sustainable energy generation with plant cultivation, offering more possibilities of energy production and microclimate control by adjusting the sun-tracking angles. Previous studies on PV greenhouses barely paid attention to the PV partial shading effects, and rarely recorded the performance...
journal article 2019
document
Zhang, Jian (author), Sokolovskij, R. (author), Chen, Ganhui (author), Zhu, Yumeng (author), Qi, Yongle (author), Lin, Xinpeng (author), Li, Wenmao (author), Zhang, G. (author), Jiang, Yu-Long (author), Yu, Hongyu (author)
S exposure in dry air. A pre...
journal article 2019
document
Zhang, Y. (author), Ye, G. (author)
An analytical model for predicting the relative chloride diffusion coefficient in cementitious materials at different degrees of water saturation is presented in this paper. The model is developed based on the Nernst-Einstein equation and conductivity of cementitious electrolyte, as well as on moisture distribution in the pore structure. Good...
journal article 2019
document
Apostolidis, P. (author), Liu, X. (author), Zhang, M (author), van de Ven, Martin (author), Erkens, Sandra (author), Scarpas, Athanasios (author)
The addition of epoxy modifier in bitumen is a relatively new modification technology (1-4) and the most critical epoxy polymerization-induced changes of the epoxy-bituminous materials are not fully understood. Different phenomena take place when epoxy modifiers are incorporated into bitumen and they are dependent on the material hardening...
conference paper 2019
Searched for:
(1 - 20 of 503)

Pages