Experimental evaluation of interface adhesion of a flax fiber composite patch with epoxy and polyurethane adhesives for the reinforcement of steel structures

Using fiber-reinforced composite patches for repairing damaged structures made of metal or/and concrete is an interesting and widely available solution on the market using synthetic materials. These repairing patches are bonded on the structures’ surfaces to increase their strength against internal stresses, as well as protect them from external...

Multiscale Soft Surface Instabilities for Adhesion Enhancement

Soft polymeric gels are susceptible to buckling-induced instabilities due to their great compliance to surface deformations. The instability patterns at soft interfaces have great potential in engineering functional materials with unique surface properties. In this work, we systematically investigated how swelling-induced instability patterns...

Synthesis and characterization of novel eco-epoxy adhesives based on the modified tannic acid for self-healing joints

The aim of this research was to investigate the self-healing potential of damaged Al joints when bonded using novel eco-epoxide adhesives derived from tannic acid (TA). Two eco-epoxy components based on TA, (A) glycidyl ether and (B) glycidyl phosphate ester of TA, were produced. The effect of the eco-epoxy components on the self-healing...

An experimental study on the effects of friction modifiers on wheel–rail dynamic interactions with various angles of attack

By modifying friction to the desired level, the application of friction modifiers (FMs) has been considered as a promising emerging tool in the railway engineering for increasing braking/traction force in poor adhesion conditions and mitigating wheel/rail interface deterioration, energy consumption, vibration and noise. Understanding the...

Adhesion Improvement of Thermoplastics-Based Composites by Atmospheric Plasma and UV Treatments

The present work is concerned with adhesive bonding of thermoplastic composites used in general aerospace applications, including polyphenylene sulfide (PPS), polyetherimide (PEI) and polyetheretherketone (PEEK) carbon fibre composites. Three different surface treatments have been applied to the PEEK, PPS and PEI-based composites in order to...

Self-healing capability of novel eco-epoxy adhesives based on the modified tannic acid on Al adherends tested in a single lap joint

The aim of this paper is to study the self-healing capability of fractured Al joints bonded with novel eco-epoxide adhesives synthesized from a bio-renewable raw material (tannic acid – TA). Two synthesized eco-epoxy components based on TA, (A) glycidyl ether and (B) glycidyl phosphate ester of TA, were used as a replacement for the toxic epoxy...

Molecular dynamics and experimental study on the adhesion mechanism of polyvinyl alcohol (PVA) fiber in alkali-activated slag/fly ash

This paper aims to study the adhesion mechanism of polyvinyl alcohol (PVA) fiber within alkali-activated slag/fly ash (AASF) matrix using molecular dynamics (MD) simulation in combination with systematic experimental characterization. The adhesion of PVA to C-(N-)A-S-H gel with different Ca/(Si+Al) and Al/Si ratios was modeled using MD...

Tailored Adhesion Properties of Acrylate Adhesives on Al Alloys by the Addition of Mn-Al–LDH

The goal of this study was to investigate the effect of the structure of Mn-Al layered double hydroxide (LDH) on the adhesion behavior of composite adhesives on two Al alloys (L3005 and L8079). The composite adhesives were made out of the UV-curing Bisphenol A glycidylmethacrylate/triethylene glycol dimethacrylate (BT) as polymer matrix and the...

Effect of salt spray ageing on the fracture of composite-to-metal bonded joints

This work investigates the effect of long-term environmental exposure on the performance of composite-to-metal bonded joints. Specimens are manufactured using a carbon-fiber reinforced polymer (CFRP) co-bonded to a steel member with epoxy adhesive and aged in a salt spray chamber. The mixed-mode fracture behavior of the non-aged and aged...

The mechanical effects of kissing bonding defects in hybrid metal-composite laminates

Fibre metal laminates (FML) are hybrid materials perspective for wind-turbine, containers and marine objects, besides the aerospace industry. During the manufacturing process some faults can occur and can be hazardous for the reliability of FML structures. One of the most critical defects are kissing bonding due to their lack of detectability...

Effect of surface roughness and chemistry on the adhesion and durability of a steel-epoxy adhesive interface

This work focuses on the effect of surface roughness and surface chemistry on the initial adhesion strength and corrosive de-adhesion properties of adhesive bonds. The adherend used in this study is a S690 low-alloy steel whereas the adhesive is a 2-component epoxy-amine adhesive (Araldite 2015). The steel surface is subjected to different...

On the load-area relation in rough adhesive contacts

It is well established that, at small loads, a linear relation exists between contact area and reduced pressure for elastic bodies with non-adhesive rough surfaces. In the case of adhesive contacts, however, there is not yet a general consensus on whether or not linearity still holds. In this work evidence is provided, through numerical...

Effect of lateral reinforcements on the adhesion and friction of micropillar adhesives

Micropillar adhesives have gained increasing attention because they generate high pull-off forces. The generation of high friction, however, has been proven difficult with such geometries, because micropillars tend to buckle under shear loading. Here, we fabricated orthogonal arrays of composite poly-dimethoxysiloxane (PDMS) micropillars with...

Pull-off and friction forces of micropatterned elastomers on soft substrates: The effects of pattern length scale and stiffness

The adhesiveness of biological micropatterned adhesives primarily relies on their geometry (e.g., feature size, architecture) and material properties (e.g., stiffness). Over the last few decades, researchers have been mimicking the geometry and material properties of biological micropatterned adhesives. The performance of these biomimetic...

The photo-stability of acrylic tri-block copolymer blends for the consolidation of cultural heritage

A variety of adhesives are used for the conservation of paintings. These materials include natural adhesives such as animal glues, waxes, and gums which may chemically degrade over time resulting in unwanted discoloration and mechanical failure. Synthetic adhesives have been introduced to address these concerns. However, most consolidating...

Damage characterization of adhesively-bonded Bi-material joints using acoustic emission

The aim of the present study is to characterize the damage in bi-material steel-to-composite double-lap adhesively-bonded joints using Acoustic Emission (AE). Two different structural adhesives, a ductile (Methacrylate-based) and brittle (Epoxy-based), were used to bond CFRP skins to a steel core. The fabricated joints were loaded in tension...