Searched for: +
(1 - 20 of 28)

Pages

document
Liu, Y. (author), Tang, Q. (author), Fox, R.O. (author)
Computational fluid dynamics (CFD) is a useful tool for modeling chemical reactors. However, because the design goals and expected outcomes are different than in "traditional'' CFD applications, chemical reactors require special attention to the treatment of chemical reactions, and heat and mass transfer. Here we provide an overview of the...
conference paper 2006
document
Zhang, Su-xia (author), Tang, You-gang (author), Liu, Xi-jun (author)
journal article 2012
document
Liu, Liqin (author), Incecik, A. (author), Zhang, Y. (author), Tang, Y. (author)
journal article 2014
document
Liu, H. (author), Tang, G. (author), Imparato, D. (author), Cui, H. (author), Song, B. (author), Rizos, C. (author)
Multi-GNSS networks, for example M-GEX and iGMAS, are set up and grow quickly with the development of new navigation systems and multi-GNSS receivers. It is unavoidable that GNSS signals are deteriorated by several error sources. Thus GNSS network operators, data users and receiver designers all require data quality checking (QC). However, few...
conference paper 2014
document
Liu, Z. (author), Shao, J. (author), Tang, Y. (author)
An experimental study was carried out on the time-dependent mechanical and transport behaviors of the Callovo-Oxfordian (Cox) argillite, the geological barriers for high-level radioactive waste disposal in France. Six coupled one-step creep tests under the same confining pressure 6MPa and different deviatoric stresses were proposed to...
conference paper 2016
document
Wang, Jijie (author), Li, G. (author), Li, Zelong (author), Tang, Chizhou (author), Feng, Zhaochi (author), An, Hongyu (author), Liu, Hailong (author), Liu, Taifeng (author), Li, Can (author)
Although methanol synthesis via CO hydrogenation has been industrialized, CO<sub>2</sub> hydrogenation to methanol still confronts great obstacles of low methanol selectivity and poor stability, particularly for supported metal catalysts under industrial conditions. We report a binary metal oxide, ZnO-ZrO<sub>2</sub> solid solution catalyst,...
journal article 2017
document
Qian, Kun (author), Tang, Linkai (author), Wagemaker, M. (author), He, Yan Bing (author), Liu, Dongqing (author), Li, Hai (author), Shi, Ruiying (author), Li, Baohua (author), Kang, Feiyu (author)
Through a facile sodium sulfide (Na<sub>2</sub>S)-assisted hydrothermal treatment, clean and nondefective surfaces are constructed on micrometer-sized Li<sub>4</sub>Ti<sub>5</sub>O<sub>12</sub> particles. The remarkable improvement of surface quality shows a higher first cycle Coulombic efficiency (≈95%), a significantly enhanced cycling...
journal article 2017
document
Zhang, Xinying (author), Wu, Yan (author), Xiao, Gao (author), Tang, Zhenping (author), Wang, Meiyin (author), Liu, Fuchang (author), Zhu, X. (author)
Azo dyes are very resistant to light-induced fading and biodegradation. Existing advanced oxidative pre-treatment methods based on the generation of non-selective radicals cannot efficiently remove these dyes from wastewater streams, and post-treatment oxidative dye removal is problematic because it may leave many byproducts with unknown...
journal article 2017
document
Liu, Jikai (author), Gaynor, Andrew T. (author), Chen, Shikui (author), Kang, Zhan (author), Suresh, Krishnan (author), Takezawa, Akihiro (author), Li, Lei (author), Kato, Junji (author), Tang, Jinyuan (author), Wang, C.C. (author), Cheng, Lin (author), Liang, Xuan (author), To, Albert. C. (author)
Manufacturing-oriented topology optimization has been extensively studied the past two decades, in particular for the conventional manufacturing methods, for example, machining and injection molding or casting. Both design and manufacturing engineers have benefited from these efforts because of the close-to-optimal and friendly-to-manufacture...
journal article 2018
document
Liu, Jianguo (author), Beard, Matt (author), Isabella, O. (author), Tang, Jianxin (author)
The editors introduce the feature issue on “Energy, Light and the Environment (LEE) 2017”, which is based on the topics presented at a congress of the same name held in Boulder, CO, US, from November 6 to November 9. This feature issue presents 13 papers selected from the voluntary submissions by attendees who presented at the progress and...
review 2018
document
Xiahou, Xiaer (author), Yuan, Jingfeng (author), Liu, Y. (author), Tang, Yuchun (author), Li, Qiming (author)
Construction industrialization (CI) has been adopted worldwide because of its potential benefits. However, current research shows the incentives for adopting CI may differ in different regions. While the promotion of CI in China is still at the initial stage, a systematical analysis of the driving factors would help decision makers get a...
journal article 2018
document
Zhang, Chi (author), Tang, Qiuhong (author), Chen, Deliang (author), van der Ent, R.J. (author), Liu, Xingcai (author), Li, Wenhong (author), Haile, Gebremedhin Gebremeskel (author)
Precipitation on the Tibetan Plateau (TP) showed different spatial changes during 1979-2016, with an increasing trend over the northern Tibetan Plateau (NTP) and a slightly negative trend over the southern Tibetan Plateau (STP). The changes in precipitation moisture sources over the NTP and STP are investigated using the improved Water...
journal article 2019
document
Han, Rui (author), Liu, Chi Harold (author), Li, Shilin (author), Chen, Lydia Y. (author), Wang, Guoren (author), Tang, Jian (author), Ye, Jieping (author)
The core of many large-scale machine learning (ML) applications, such as neural networks (NN), support vector machine (SVM), and convolutional neural network (CNN), is the training algorithm that iteratively updates model parameters by processing massive datasets. From a plethora of studies aiming at accelerating ML, being data...
journal article 2019
document
Li, Z. (author), Jiang, X. (author), Hopman, J.J. (author), Zhu, Ling (author), Liu, Z. (author), Tang, Weiguo (author)
Surface cracked steel plates reinforced with single-side Fiber-Reinforced Polymer (FRP) subjected to cyclic tension are experimental studied. The main purpose is to analyze the effect of FRP reinforcement on the crack growth. The failure modes and their effects are analyzed as well. Given the single-side reinforcement, reinforcing the cracked...
journal article 2020
document
Ma, Bingtao (author), Liu, Hongsen (author), Nan, L. (author), Tang, Xu (author), Fan, Huijie (author), Cong, Yang (author)
The 3D mesh is an important representation of geometric data. It is widely used in computer graphics and has attracted more attention in computer vision community recently. However, in the generation of mesh data, geometric deficiencies (e.g., duplicate elements, degenerate faces, isolated vertices, self-intersection, and inner faces) are...
conference paper 2021
document
Liu, Zhihui (author), Wang, Li (author), Kong, Fanlei (author), Huang, Xia (author), Tang, Zhi (author), He, Shi (author), Vink, P. (author)
BACKGROUND: Many occupations require workers to stand for prolonged periods, which can cause discomfort, pain and even injures. Some supermarkets in life provide a foot pad for checkout staff to let them stand on it at work, thereby reducing standing fatigue caused by standing for a long time. The inclined platform is the same as the foot pad...
journal article 2021
document
Ran, Jiangjun (author), Ditmar, P.G. (author), Liu, Lin (author), Xiao, Yun (author), Klees, R. (author), Tang, Xueyuan (author)
Mascon products derived from Gravity Recovery and Climate Experiment satellite gravimetry data are widely used to study the Greenland ice sheet mass balance. However, the products released by different research groups—JPL, CSR, and GSFC—show noticeable discrepancies. To understand them, we compare those mascon products with mascon solutions...
journal article 2021
document
Liu, Yubo (author), Zhang, Chi (author), Tang, Qiuhong (author), Hosseini-Moghari, Seyed Mohammad (author), Haile, Gebremedhin Gebremeskel (author), Li, Laifang (author), Li, Wenhong (author), Yang, Kun (author), van der Ent, R.J. (author), Chen, Deliang (author)
Rainfall is one of the most influential climatic factors on regional development and environment, and changes in rainfall intensity are of specific concern. In the Huaihe River Valley (HRV), heavy rainfall is a primary trigger of floods. However, the difference in the origin of moisture contributed to heavy rainfall and light rainfall is...
journal article 2021
document
Li, Xiao (author), Tang, Jiuyang (author), Zhao, Jiayan (author), Li, Jinbing (author), Zhang, Kouchi (author), Liu, Pan (author)
With the development of 5G communication technology and the rise of power semiconductors, the switching frequency of the circuit keeps increasing, which pushes for miniaturization of power modules and related components. Therefore, in this paper, a one-step molding technology was proposed for a DC/DC buck converter power module. We proposed a...
conference paper 2022
document
Tang, Ruifan (author), De Donato, Lorenzo (author), Bešinović, Nikola (author), Flammini, Francesco (author), Goverde, R.M.P. (author), Lin, Zhiyuan (author), Liu, Ronghui (author), Tang, Tianli (author), Vittorini, Valeria (author), Wang, Z. (author)
Nowadays it is widely accepted that Artificial Intelligence (AI) is significantly influencing a large number of domains, including railways. In this paper, we present a systematic literature review of the current state-of-the-art of AI in railway transport. In particular, we analysed and discussed papers from a holistic railway perspective,...
review 2022
Searched for: +
(1 - 20 of 28)

Pages