- document
-
Feng, Lichao (author), Yi, Shengjie (author), Zhao, Shuyuan (author), Zhong, Qiucheng (author), Ren, Feirong (author), Liu, C. (author), Zhang, Y. (author), Wang, Wenshou (author), Li, Zhenming (author)Recycling aluminosilicate-based solid wastes is imperative to realize the sustainable development of constructions. By using alkali activation technology, aluminosilicate-based solid wastes, such as furnace slag, fly ash, red mud, and most of the bio-ashes, can be turned into alternative binder materials to Portland cement to reduce the carbon...review 2024
- document
-
Wu, B. (author)Supplementary cementitious materials (SCMs), like fly ash (FA) and blast furnace slag (BFS), are widely used in concrete to partially replace the cement clinker in the production of blended cement or directly replace part of Ordinary Portland cement (OPC) in the concrete. No matter how the SCMs are introduced, they can reduce the cost of...doctoral thesis 2023
- document
-
Fokkinga, E.P. (author), Hernandez-Tamames, J.A. (author), Ianus, Andrada (author), Nilsson, Markus (author), Tax, Chantal M.W. (author), Perez-Lopez, Raquel (author), Grussu, Francesco (author)Diffusion-weighted magnetic resonance imaging (DW-MRI) aims to disentangle multiple biological signal sources in each imaging voxel, enabling the computation of innovative maps of tissue microstructure. DW-MRI model development has been dominated by brain applications. More recently, advanced methods with high fidelity to histology are...review 2023
- document
-
Asperti, S. (author), Hendrikx, R.W.A. (author), Gonzalez Garcia, Y. (author), Kortlever, R. (author)Copper is one of the most promising catalysts for the CO<sub>2</sub> reduction reaction (CO<sub>2</sub>RR) due to its unique capability of producing multicarbon products in appreciable quantities. Most of the CO<sub>2</sub>RR research efforts have been directed towards the development of new electrocatalysts to either increase product...journal article 2022
- document
-
Yin, Kangting (author), Jiang, Yaqing (author), Wang, Yu (author), Zhao, Wenhao (author), Pan, Zhenghua (author), Li, Z. (author)One-part alkali-activated slag (AAS) as a binder material has a promising application in the construction industry. The properties of one-part AAS incorporating agricultural wastes have been seldom studied. In this paper, the fresh and hardened properties of one-part AAS with the addition of rice straw powder (RSP) were investigated. The...journal article 2022
- document
-
Zhang, Hongzhi (author), Shao, Yingxuan (author), Zhang, Ning (author), Tawfek, Abdullah M. (author), Guan, Yanhua (author), Sun, Renjuan (author), Tian, Changjin (author), Šavija, B. (author)Engineered cementitious composites (ECCs) belong to a broad class of fibre-reinforced concrete. They incorporate synthetic polyvinyl alcohol (PVA) fibres, cement, fly ash and fine aggregates, and are designed to have a tensile strain capacity typically beyond 3%. This paper presents an investigation on the carbonation behaviour of engineered...journal article 2022
- document
-
Li, Wei (author), Yi, Liming (author), Jiang, Wen (author), Dong, H. (author), Zhang, Yong (author)This paper presents experimental investigations into the effects of ultrafine blast furnace slag on microstructure improvements against chloride penetration in saturated and unsaturated cementitious systems exposed to cyclic drying–wetting conditions. The hydration kinetics of ultrafine slag powders and pore solution chemistry in slag-blended...journal article 2022
- document
-
Ren, Jie (author), Sun, Hongfang (author), Li, Qun (author), Li, Z. (author), Zhang, Xiaogang (author), Wang, Yanshuai (author), Li, Linfei (author), Xing, Feng (author)In this research, the effects of natural seawater (SW) on the properties of alkali-activated slag/fly ash (AASF) are studied. AASF prepared with deionized water is set as the reference mixture. The results showed that the use of natural SW resulted in a prolonged setting time and lower heat release, but no obvious impact on the flowability of...journal article 2022
- document
-
Li, Z. (author)Alkali-activated materials (AAMs), as eco-friendly alternatives to Ordinary Portland cement (OPC), have attracted increasing attention of researchers in the past decades. Unlike cement, which requires calcination of limestone, AAMs can be made from industrial by-products, or even wastes, with the use of alkali-activator. The production of AAMs...doctoral thesis 2021
- document
-
Katuin, N. (author), Peeters, D.M.J. (author), Dransfeld, C.A. (author)The outstanding properties of carbon fibre-reinforced polymer composites are affected by the development of its microstructure during processing. This work presents a novel approach to identify microstructural features both along the tape thickness and through the thickness. Voronoi tessellation-based evaluation of the fibre volume content on...journal article 2021
- document
-
Fu, J. (author), Richardson, I.M. (author), Hermans, M.J.M. (author)Oxide dispersion-strengthened (ODS) Eurofer steel was laser welded using a short pulse duration and a designed pattern to minimise local heat accumulation. With a laser power of 2500 W and a duration of more than 3 ms, a full penetration can be obtained in a 1 mm thick plate. Material loss was observed in the fusion zone due to metal...journal article 2021
- document
-
Susanto, A. (author)Stray current has become a main concern for many years due to its effect on (reinforced) concrete structures and underground infrastructures. It has been reported that stray current affects not only steel reinforcement embedded in concrete, but can also induce degradation of the cement-based matrix. Stray current causes an increase of...doctoral thesis 2020
- document
-
Zhang, Y. (author), Liu, X. (author), Apostolidis, P. (author), Jing, R. (author), Erkens, S. (author), Poeran, Natascha (author), Scarpas, Athanasios (author)Organosolv lignin, a natural polymer, has been used in this study as an oxidation inhibitor in bitumen. Particularly, the effect of oxidative aging on the chemical compositional changes and on the rheology of bituminous binders with organosolv lignin and the impact to inhibit oxidation in bitumen were evaluated. Firstly, after analyzing the...journal article 2020
- document
-
Zhang, Yi (author), Liu, X. (author), Apostolidis, P. (author), Gard, W.F. (author), van de Ven, Martin (author), Erkens, S. (author), Jing, R. (author)As bitumen oxidizes, material stiffening and embrittlement occur, and bitumen eventually cracks. The use of anti-oxidants, such as lignin, could be used to delay oxidative aging and to extend the lifetime of asphalt pavements. In this study, the chemical and rheological effect of lignin on bitumen was evaluated by using a single dosage organsolv...journal article 2019
- document
-
Hajizad, O. (author), Kumar, A. (author), Li, Z. (author), Petrov, R.H. (author), Sietsma, J. (author), Dollevoet, R.P.B.J. (author)Wheel–rail contact creates high stresses in both rails and wheels, which can lead to different damage, such as plastic deformation, wear and rolling contact fatigue (RCF). It is important to use high-quality steels that are resistant to these damages. Mechanical properties and failure of steels are determined by various microstructural...journal article 2019
- document
-
Lin, Zidong (author), Goulas, C. (author), Ya, Wei (author), Hermans, M.J.M. (author)Wire and arc additive manufacturing (WAAM) is a 3D metal printing technique based on the arc welding process. WAAM is considered to be suitable to produce large-scale metallic components by combining high deposition rate and low cost. WAAM uses conventional welding consumable wires as feedstock. In some applications of steel components, one-off...journal article 2019
- document
-
Gao, P. (author)For optimization of the use of Supplementary Cementitious Materials (SCMs), i.e. blast furnace slag (BFS) and fly ash (FA), in cementitious system a numerical model for simulating the hydration and microstructure development of blended cements can be used. Several models have been proposed in recent years to simulate the hydration and...doctoral thesis 2018
- document
-
Yu, H. (author), Xu, W. (author), van der Zwaag, S. (author)In this study, the long term creep strength behavior of commercial heat resistant martensitic/ferritic steels with Cr levels ranging from 1 to 15 wt% is analyzed by linking their computed equilibrium compositions to their creep properties. At lower Cr levels, the calculated strength due to precipitation hardening agrees well with the...journal article 2018
- document
-
van der Stok-Nienhuis, J. (author)The different phases in the life of archaeological objects can be described by artefact biography. This dissertation defines an updated version: artefact biography 2.0, and the life phases of Early Iron Age bronze studs from Oss-Zevenbergen, the Netherlands, are elaborated. Throughout the thesis, the research revolves around information value....doctoral thesis 2017
- document
-
Susanto, A. (author), Koleva, D.A. (author), van Breugel, K. (author), van Beek, C. (author)This work reports on the development of microstructural and mechanical properties of mortar cubes under the synergetic action of stray current and various environmental/curing conditions. The study refers to specimens cured for 24h only, followed by a 112 days period of partial or full submersion in water or alkaline medium. Additionally,...journal article 2017