- document
-
Hedayati, R. (author), Hosseini-Toudeshky, H (author), Sadighi, M. (author), Mohammadi-Aghdam, M. (author), Zadpoor, A.A. (author)The mechanical behavior of additively manufactured porous biomaterials has recently received increasing attention. While there is a relatively large body of data available on the static mechanical properties of such biomaterials, their fatigue behavior is not yet well-understood. That is partly because systematic study of the fatigue behavior...journal article 2016
- document
-
Langelaar, Matthijs (author)The potential of topology optimization to amplify the benefits of additive manufacturing (AM), by fully exploiting the vast design space that AM allows, is widely recognized. However, existing topology optimization approaches do not consider AM-specific limitations during the design process, resulting in designs that are not self-supporting....journal article 2016
- document
-
Hedayati, R. (author), Sadighi, M. (author)Today, interconnected open-cell porous structures made of titanium and its alloys are replacing the prevalent solid metals used in bone substitute implants. The advent of additive manufacturing techniques has enabled manufacturing of open-cell structures with arbitrary micro-structural geometry. In this paper, rhombic dodecahedron structures...journal article 2016
- document
-
Hakkaart, X.D.V. (author), Pronk, J.T. (author), van Maris, A.J.A. (author)Understanding microbial growth and metabolism is a key learning objective of microbiology and biotechnology courses, essential for understanding microbial ecology, microbial biotechnology and medical microbiology. Chemostat cultivation, a key research tool in microbial physiology that enables quantitative analysis of growth and metabolism under...journal article 2017
- document
-
Li, Y. (author), Zhou, J. (author), Pavanram, P. (author), Leeflang, M.A. (author), Fockaert, L.I. (author), Pouran, B. (author), Tümer, N. (author), Schröder, K. U. (author), Mol, J.M.C. (author), Weinans, Harrie (author), Jahr, H. (author), Zadpoor, A.A. (author)An ideal bone substituting material should be bone-mimicking in terms of mechanical properties, present a precisely controlled and fully interconnected porous structure, and degrade in the human body to allow for full regeneration of large bony defects. However, simultaneously satisfying all these three requirements has so far been highly...journal article 2017
- document
-
Langelaar, Matthijs (author)Additive manufacturing (AM) offers exciting opportunities to manufacture parts of unprecedented complexity. Topology optimization is essential to fully exploit this capability. However, AM processes have specific limitations as well. When these are not considered during design optimization, modifications are generally needed in post...journal article 2017
- document
-
Hedayati, R. (author), Sadighi, M (author), Mohammadi-Aghdam, M (author), Zadpoor, A.A. (author)Additively manufacturing (AM) techniques make it possible to fabricate open-cell interconnected structures with precisely controllable micro-architectures. It has been shown that the morphology, pore size, and relative density of a porous structure determine its macro-scale homogenized mechanical properties and, thus, its biological performance...journal article 2017
- document
-
Hedayati, R. (author), Janbaz, S. (author), Sadighi, M. (author), Mohammadi-Aghdam, M. (author), Zadpoor, A.A. (author)Although the initial mechanical properties of additively manufactured porous biomaterials are intensively studied during the last few years, almost no information is available regarding the evolution of the mechanical properties of implant-bone complex as the tissue regeneration progresses. In this paper, we studied the effects of tissue...journal article 2017
- document
-
van Hengel, I.A.J. (author), Riool, Martijn (author), Fratila-Apachitei, E.L. (author), Witte-Bouma, Janneke (author), Farrell, Eric (author), Zadpoor, A.A. (author), Zaat, Sebastian A.J. (author), Apachitei, I. (author)Additively manufactured Ti-6Al-4V implants were biofunctionalized using plasma electrolytic oxidation. At various time points during this process scanning electron microscopy imaging was performed to analyze the surface morphology (van Hengel et al., 2017) [1]. This data shows the changes in surface morphology during plasma electrolytic...journal article 2017
- document
-
Wu, J. (author), Clausen, Anders (author), Sigmund, Ole (author)Additively manufactured parts are often composed of two sub-structures, a solid shell forming their exterior and a porous infill occupying the interior. To account for this feature this paper presents a novel method for generating simultaneously optimized shell and infill in the context of minimum compliance topology optimization. Our method...journal article 2017
- document
-
Hedayati, R. (author), Amin Yavari, S. (author), Zadpoor, A.A. (author)Additively manufactured porous titanium implants, in addition to preserving the excellent biocompatible properties of titanium, have very small stiffness values comparable to those of natural bones. Although usually loaded in compression, biomedical implants can also be under tensional, shear, and bending loads which leads to crack initiation...journal article 2017
- document
-
Bekker, A.C.M. (author), Verlinden, J.C. (author)Wire and Arc Additive Manufacturing (WAAM) is a metal 3D printing technique based on robotic welding. This technique yields potential in decreasing material consumption due to its high material efficiency and freedom of shape. Empirical measurements of WAAM, using a deposition rate of 1 kg/h, were performed on site of MX3D. The measured power...journal article 2018
- document
-
Li, Y. (author), Jahr, H. (author), Lietaert, K. (author), Pavanram, P. (author), Yilmaz, A. (author), Fockaert, L.I. (author), Leeflang, M.A. (author), Pouran, B. (author), Gonzalez Garcia, Y. (author), Weinans, Harrie (author), Mol, J.M.C. (author), Zhou, J. (author), Zadpoor, A.A. (author)Additively manufactured (AM) topologically ordered porous metallic biomaterials with the proper biodegradation profile offer a unique combination of properties ideal for bone regeneration. These include a fully interconnected porous structure, bone-mimicking mechanical properties, and the possibility of fully regenerating bony defects. Most...journal article 2018
- document
-
Hedayati, R. (author), Sadighi, M. (author), Mohammadi-Aghdam, M (author), Hosseini-Toudeshky, H (author)Additive manufacturing techniques have made it possible to create open-cell porous structures with arbitrary micro-geometrical characteristics. Since a wide range of micro-geometrical features is available for making an implant, having a comprehensive knowledge of the mechanical response of cellular structures is very useful. In this study,...journal article 2018
- document
-
Yang, Y. (author), Knol, Marius (author), van Keulen, A. (author), Ayas, C. (author)Selective laser melting (SLM) wherein a metal part is built in a layer-by-layer manner in a powder bed is a promising and versatile way for manufacturing components with complex geometry. However, components built by SLM suffer from substantial deformation of the part and residual stresses. Residual stresses arise due to temperature gradients...journal article 2018
- document
-
Ahmadi, S.M. (author), Hedayati, R. (author), Li, Y (author), Lietaert, K. (author), Tümer, N. (author), Fatemi, A. (author), Rans, C.D. (author), Pouran, B. (author), Weinans, Harrie (author), Zadpoor, A.A. (author)Additive manufacturing (AM) techniques enable fabrication of bone-mimicking meta-biomaterials with unprecedented combinations of topological, mechanical, and mass transport properties. The mechanical performance of AM meta-biomaterials is a direct function of their topological design. It is, however, not clear to what extent the material type...journal article 2018
- document
-
Verhoef, L.A. (author), Budde, Bart (author), Chockalingam, Cindhuja (author), García Nodar, Brais (author), van Wijk, A.J.M. (author)The effect of disruptive technologies unrelated to the energy sector, such as additive manufacturing (AM), tends to be overlooked in energy scenarios. The present research assessed the potential effect of AM on the global energy demand in four energy scenarios for 2050 with extended versus limited globalisation and limited versus extensive...journal article 2018
- document
-
Hedayati, R. (author), Hosseini-Toudeshky, H. (author), Sadighi, M. (author), Mohammadi-Aghdam, M. (author), Zadpoor, A.A. (author)Advances in additive manufacturing (AM) techniques have enabled fabrication of highly porous titanium implants that combine the excellent biocompatibility of bulk titanium with all the benefits that a regular volume-porous structure has to offer (e.g. lower stiffness values comparable to those of bone). Clinical application of such...journal article 2018
- document
-
Cuellar Lopez, J.S. (author), Smit, G. (author), Zadpoor, A.A. (author), Breedveld, P. (author)In developing countries, prosthetic workshops are limited, difficult to reach, or even non-existent. Especially, fabrication of active, multi-articulated, and personalized hand prosthetic devices is often seen as a time-consuming and demanding process. An active prosthetic hand made through the fused deposition modelling technology and fully...journal article 2018
- document
-
Sakes, A. (author), Hovland, Kevin (author), Smit, G. (author), Geraedts, Jo M.P. (author), Breedveld, P. (author)In current bipolar electrosurgical instruments, a high frequency electrical sinusoidal wave is passed through the patient's body from an active electrode to the return electrode to cut, coagulate, or desiccate tissues. Even though current bipolar electrosurgical instruments have proven effective in minimizing blood loss, advancement is needed...journal article 2018