Searched for: +
(1 - 20 of 26)

Pages

document
Yang, G. (author), Zhang, Y. (author), Procel Moya, P.A. (author), Weeber, A.W. (author), Isabella, O. (author), Zeman, M. (author)
Highest conversion efficiency in crystalline silicon (c-Si) solar cells can be enabled by quenching minority carriers' recombination at c-Si/contact interface owing to carrier-selective passivating contacts. With the semi-insulating poly-crystalline silicon (SIPOS, poly-Si) a very good passivation of c-Si surfaces was obtained. We have...
journal article 2017
document
Yang, G. (author), Guo, Peiqing (author), Procel Moya, P.A. (author), Weeber, A.W. (author), Isabella, O. (author), Zeman, M. (author)
The poly-Si carrier-selective passivating contacts (CSPCs) parasitically absorb a substantial amount of light, especially in the form of free carrier absorption. To minimize these losses, we developed CSPCs based on oxygen-alloyed poly-Si (poly-SiO<sub>x</sub>) and deployed them in c-Si solar cells. Transmission electron microscopy analysis...
journal article 2018
document
Yang, G. (author), Guo, Peiqing (author), Procel Moya, P.A. (author), Limodio, G. (author), Weeber, A.W. (author), Isabella, O. (author), Zeman, M. (author)
In this work, we present the application of poly-Si carrier-selective passivating contacts (CSPCs) as both polarities in interdigitated back-contacted (IBC) solar cell architectures. We compared two approaches to form a gap between the back-surface field (BSF) and emitter fingers. It is proved that the gaps prepared by both approaches are...
journal article 2018
document
Procel Moya, P.A. (author), Yang, G. (author), Isabella, O. (author), Zeman, M. (author)
In this work we present a theoretical analysis of charge carriers transport mechanisms in IBC-SHJ solar cells. The concepts of contact and transport selectivity are correlated through the band bending at c-Si interface and are used to identify thin-film silicon parameters affecting fill factor (FF) and open-circuit voltage (V<sub>OC</sub>)....
journal article 2018
document
Han, C. (author), Mazzarella, L. (author), Zhao, Y. (author), Yang, G. (author), Procel Moya, P.A. (author), Tijssen, M. (author), Bento Montes, A.R. (author), Isabella, O. (author), Zeman, M. (author)
Broadband transparent conductive oxide layers with high electron mobility (μ<sub>e</sub>) are essential to further enhance crystalline silicon (c-Si) solar cell performances. Although metallic cation-doped In<sub>2</sub>O<sub>3</sub> thin films with high μ<sub>e</sub> (&gt;60 cm<sup>2</sup> V<sup>-1</sup> s<sup>-1</sup>) have been extensively...
journal article 2019
document
Limodio, G. (author), Yang, G. (author), Ge, H. (author), Procel Moya, P.A. (author), de Groot, Y. (author), Mazzarella, L. (author), Isabella, O. (author), Zeman, M. (author)
In this work we develop a rear emitter silicon solar cell integrating carrier-selective passivating contacts (CSPCs) with different thermal budget in the same device. The solar cell consists of a B-doped poly-Si/SiO<sub>x</sub> hole collector and an i/n hydrogenated amorphous silicon (a-Si:H) stack acting as electron collector placed on the...
journal article 2019
document
Procel Moya, P.A. (author), Yang, G. (author), Isabella, O. (author), Zeman, M. (author)
This paper presents an analysis of physical mechanisms related to operation and optimization of interdigitated back contact (IBC) poly-silicon-based devices. Concepts of carrier selectivity and tunneling are used to identify the parameters that impact on the fill factor. Then, based on technology computer-aided design (TCAD) numerical...
journal article 2019
document
Procel Moya, P.A. (author), Xu, Haiyuan (author), Saez, Aurora (author), Ruiz Tobon, C.M. (author), Mazzarella, L. (author), Zhao, Y. (author), Han, C. (author), Yang, G. (author), Zeman, M. (author), Isabella, O. (author)
The contact resistivity is a key parameter to reach high conversion efficiency in solar cells, especially in architectures based on the so-called carrier-selective contacts. The importance of contact resistivity relies on the evaluation of the quality of charge collection from the absorber bulk through adjacent electrodes. The electrode...
journal article 2020
document
Zhao, Y. (author), Mazzarella, L. (author), Procel Moya, P.A. (author), Han, C. (author), Yang, G. (author), Weeber, A.W. (author), Zeman, M. (author), Isabella, O. (author)
Hydrogenated nanocrystalline silicon oxide (nc-SiO<sub>x</sub>:H) layers exhibit promising optoelectrical properties for carrier-selective-contacts in silicon heterojunction (SHJ) solar cells. However, achieving high conductivity while preserving crystalline silicon (c-Si) passivation quality is technologically challenging for growing thin...
journal article 2020
document
Mazzarella, L. (author), Alcañiz Moya, A. (author), Kawa, Eliora (author), Procel Moya, P.A. (author), Zhao, Y. (author), Han, C. (author), Yang, G. (author), Zeman, M. (author), Isabella, O. (author)
Electrical simulations show that the dipole formed at (i)a-Si:H/MoOx interface can explain electrical performance degradation. We experimentally manipulate this interface by a plasma treatment (PT) to mitigate the dipole strength without harming the optical response. The optimal PT + MoOx stack results in strongly improved electrical...
conference paper 2020
document
Han, C. (author), Yang, G. (author), Montes, Ana (author), Procel Moya, P.A. (author), Mazzarella, L. (author), Zhao, Y. (author), Eijt, S.W.H. (author), Schut, H. (author), Zhang, Xiaodan (author), Zeman, M. (author), Isabella, O. (author)
In high-efficiency silicon solar cells featuring carrier-selective passivating contacts based on ultrathin SiOx/poly-Si, the appropriate implementation of transparent conductive oxide (TCO) layers is of vital importance. Considerable deterioration in passivation quality occurs for thin poly-Si-based devices owing to the sputtering damage...
journal article 2020
document
Mazzarella, L. (author), Alcañiz Moya, A. (author), Procel Moya, P.A. (author), Kawa, Eliora (author), Zhao, Y. (author), Tiringer, U. (author), Han, C. (author), Yang, G. (author), Taheri, P. (author), Zeman, M. (author), Isabella, O. (author)
Molybdenum oxide (MoO<sub>x</sub>) is attractive for applications as hole-selective contact in silicon heterojunction solar cells for its transparency and relatively high work function. However, the integration of MoO<sub>x</sub> stacked on intrinsic amorphous silicon (i)a-Si:H layer usually exhibits some issues that are still not fully...
journal article 2020
document
Han, C. (author), Zhao, Y. (author), Mazzarella, L. (author), Santbergen, R. (author), Bento Montes, A.R. (author), Procel Moya, P.A. (author), Yang, G. (author), Zhang, Xiaodan (author), Zeman, M. (author), Isabella, O. (author)
The window layers limit the performance of silicon heterojunction (SHJ) solar cells with front and back contacts. Here, we optimized tungsten-doped indium oxide (IWO) film deposited by radio frequency magnetron sputtering at room temperature. The opto-electrical properties of the IWO were manipulated when deposited on top of thin-film silicon...
journal article 2021
document
Ortiz Lizcano, J.C. (author), Procel Moya, P.A. (author), Calcabrini, A. (author), Yang, G. (author), Ingenito, Andrea (author), Santbergen, R. (author), Zeman, M. (author), Isabella, O. (author)
Building Integrated Photovoltaic systems can produce a significant portion of the energy demand of urban areas. Despite their potential, they remain a niche technology that architects and project engineers still find esthetically limited. The dark blue or black color of standard photovoltaic panels is considered inappropriate for restoration...
journal article 2021
document
Zhao, Y. (author), Procel Moya, P.A. (author), Han, C. (author), Mazzarella, L. (author), Yang, G. (author), Weeber, A.W. (author), Zeman, M. (author), Isabella, O. (author)
Low activation energy (E<sub>a</sub>) and wide bandgap (E<sub>g</sub>) are essential for (p)-contacts to achieve effective hole collection in silicon heterojunction (SHJ) solar cells. In this work, we study Plasma-Enhanced Chemical Vapor Deposition p-type hydrogenated nanocrystalline silicon oxide, (p)nc-SiO<sub>x</sub>:H, combined with (p)nc...
journal article 2021
document
Zhao, Y. (author), Mazzarella, L. (author), Procel Moya, P.A. (author), Han, C. (author), Tichelaar, F.D. (author), Yang, G. (author), Weeber, A.W. (author), Zeman, M. (author), Isabella, O. (author)
Low parasitic absorption and high conductivity enable (n)-type hydrogenated nanocrystalline silicon [(n)nc-Si:H], eventually alloyed with oxygen [(n)nc-SiO<sub>x</sub>:H], to be deployed as window layer in high-efficiency silicon heterojunction (SHJ) solar cells. Besides the appropriate opto-electrical properties of these nanocrystalline...
journal article 2021
document
Yang, G. (author), Han, C. (author), Procel Moya, P.A. (author), Zhao, Y. (author), Singh, M. (author), Mazzarella, L. (author), Zeman, M. (author), Isabella, O. (author)
Crystalline silicon solar cells with passivating contacts based on doped poly-Si exhibit high optical parasitic losses. Aiming at minimizing these losses, we developed the oxygen-alloyed poly-Si (poly-SiOx) as suitable material for passivating contacts. From passivation point of view, poly-SiOx layers show excellent passivation quality and...
journal article 2022
document
Han, C. (author), Yang, G. (author), Procel Moya, P.A. (author), O'Connor, D. (author), Zhao, Y. (author), Gopalakrishnan, Anirudh (author), Zhang, Xiaodan (author), Zeman, M. (author), Mazzarella, L. (author), Isabella, O. (author)
Bifacial (BF) copper-plated crystalline silicon solar cell is an attractive topic to concurrently reduce silver consumption and maintain good device performance. However, it is still challenging to realize a high aspect ratio (AR) of the metal fingers. Herein, a new type of hybrid-shaped Cu finger is electromagnetically fabricated in a BF...
journal article 2022
document
Han, C. (author), Santbergen, R. (author), van Duffelen, Max (author), Procel Moya, P.A. (author), Zhao, Y. (author), Yang, G. (author), Zhang, Xiaodan (author), Zeman, M. (author), Mazzarella, L. (author), Isabella, O. (author)
Reducing indium consumption, which is related to the transparent conductive oxide (TCO) use, is a key challenge for scaling up silicon heterojunction (SHJ) solar cell technology to terawatt level. In this work, we developed bifacial SHJ solar cells with reduced TCO thickness. We present three types of In<sub>2</sub>O<sub>3</sub>-based TCOs,...
journal article 2022
document
Zhao, Y. (author), Procel Moya, P.A. (author), Smets, A.H.M. (author), Mazzarella, L. (author), Han, C. (author), Yang, G. (author), Cao, L. (author), Yao, Z. (author), Weeber, A.W. (author), Zeman, M. (author), Isabella, O. (author)
Excellent surface passivation induced by (i)a-Si:H is critical to achieve high-efficiency silicon heterojunction (SHJ) solar cells. This is key for conventional single-junction cell applications but also for bottom cell application in tandem devices. In this study, we investigated the effects of (i)a-Si:H deposition temperature on passivation...
journal article 2022
Searched for: +
(1 - 20 of 26)

Pages