Searched for: +
(1 - 20 of 24)

Pages

document
Fang, G. (author), Zhang, Tianyu (author), Huang, Yuming (author), Zhang, Zhizhou (author), Masania, K. (author), Wang, C.C. (author)
This work explores a spatial printing method to fabricate continuous fiber-reinforced thermoplastic composites (CFRTPCs), which can achieve exceptional mechanical performance. For models giving complex 3D stress distribution under loads, typical planar-layer based fiber placement usually fails to provide sufficient reinforcement due to their...
journal article 2024
document
Sun, Zhu (author), Fang, Hui (author), Yang, J. (author), Qu, Xinghua (author), Liu, Hongyang (author), Yu, Di (author), Ong, Yew Soon (author), Zhang, Jie (author)
Recently, one critical issue looms large in the field of recommender systems - there are no effective benchmarks for rigorous evaluation - which consequently leads to unreproducible evaluation and unfair comparison. We, therefore, conduct studies from the perspectives of practical theory and experiments, aiming at benchmarking recommendation...
journal article 2023
document
Yao, Mingchen (author), Zhang, Yue (author), Dai, Zihan (author), Ren, Anran (author), Fang, Jiaxing (author), Li, Xiaoming (author), van der Meer, Walter (author), Medema, G.J. (author), Rose, Joan B. (author), Liu, Gang (author)
Premise plumbing plays an essential role in determining the final quality of drinking water consumed by customers. However, little is known about the influences of plumbing configuration on water quality changes. This study selected parallel premise plumbing in the same building with different configurations, i.e., laboratory and toilet...
journal article 2023
document
Zhang, Zhihai (author), Xiao, Hong (author), Wang, Y. (author), Fang, Jia (author), Nadakatti, M. M. (author), Wang, Haoyu (author)
The lateral resistance of ballast bed is an important parameter to prevent track expansion and maintain track stability. The invasion of sand particles can cause the change of lateral resistance of ballast bed and affect the stability of track structure, but little attention has been paid to the change characteristics of nonlinear lateral...
journal article 2022
document
Zhang, Z. (author), Yan, Gaowei (author), Qiao, Tiezhu (author), Fang, Yaling (author), Pang, Y. (author)
Aiming at the problem of mismatch between real-time data distribution and modeling data distribution caused by the change of working conditions in industrial process, which leads to the performance deterioration of the soft sensor model, a multi-source unsupervised soft sensor method based on joint distribution alignment and mapping structure...
journal article 2022
document
Zhang, Z. (author), Wu, Chenming (author), Dai, C. (author), Shi, Qingqing (author), Fang, G. (author), Xie, Dongfang (author), Zhao, Xiangjie (author), Liu, Yong Jin (author), Wang, C.C. (author), Wang, Xiu Jie (author)
Despite the recent advances in artificial tissue and organ engineering, how to generate large size viable and functional complex organs still remains as a grand challenge for regenerative medicine. Three-dimensional bioprinting has demonstrated its advantages as one of the major methods in fabricating simple tissues, yet it still faces...
journal article 2022
document
Chi, Yihao (author), Xiao, Hong (author), Zhang, Zhihai (author), Fang, Shuwei (author), Wang, Haoyu (author)
Turnout is the key component of the railway tracks for trains to change direction, which is vital to operational safety and passenger comfort. Therefore, it is of great importance to perform a scientific and reasonable tamping operation for turnout areas. In this paper, based on the commercial software EDEM and RECURDYN, a coupled simulation...
journal article 2022
document
Zhang, Hongzhi (author), Yuan, Huaqiang (author), Ge, Zhi (author), Wu, Jiajie (author), Fang, Cheng (author), Schlangen, E. (author), Šavija, B. (author)
Clay brick is one of the major components of demolition waste, which is generally landfilled. Effective and new uses of recycled clay brick may provide sustainability benefits in terms of landfill reduction. Therefore, this research aims at applying Recycled fine clay brick aggregates (RFCBA) with sizes from 0.075 mm–4.75 mm to prepare Self...
journal article 2021
document
Peng, Liqi (author), Wang, Feifei (author), Zhang, Di (author), Fang, Chao (author), van der Hoek, J.P. (author), Chu, Wenhai (author)
The high chlorine dosages in wastewater treatment plants during the COVID-19 pandemic may result in increased formation of disinfection by-products (DBPs), posing great threat to the aquatic ecosystem of the receiving water body and the public health in the downstream area. However, limited information is available on the effect of biological...
journal article 2021
document
Fang, Wei (author), Zhang, Xuedong (author), Spanjers, H. (author), Zhang, Tao (author)
Persulfates ((peroxymonosulfate (PMS) and peroxydisulfate (PDS)) can disintegrate waste activated sludge (WAS), but their influence on volatile fatty acid (VFA) production during anaerobic fermentation is largely unclear. Particularly, it is unknown whether persulfates can improve fermentation without any preactivation. This study...
journal article 2021
document
Zhang, Shuoshuo (author), Zhang, Yuquan (author), Fu, Yanan (author), Zhu, Z. (author), Man, Zhongsheng (author), Bu, Jing (author), Fang, Hui (author), Min, Changjun (author), Yuan, Xiaocong (author)
Single molecule detection and analysis play important roles in many current biomedical researches. The deep-nanoscale hotspots, being excited and confined in a plasmonic nanocavity, make it possible to simultaneously enhance the nonlinear light-matter interactions and molecular Raman scattering for label-free detections. Here, we...
journal article 2021
document
Fang, W. (author), Zhang, X. (author), Zhang, Panyue (author), Carol Morera, Xavier (author), van Lier, J.B. (author), Spanjers, H. (author)
White rot fungi using P. sajor-caju and T. versicolor was examined to pretreat raw champost (lignin-rich) and oyster champost (cellulose-rich) for enhancement of fermentative volatile fatty acid (VFA) production. Results showed that the efficiency of pretreatment and VFA production was influenced by the fungal strains and substrates. P. sajor...
journal article 2020
document
Fang, G. (author), Zhang, Tianyu (author), Zhong, Sikai (author), Chen, Xiangjia (author), Zhong, Zichun (author), Wang, C.C. (author)
The anisotropy of mechanical strength on a 3D printed model can be controlled in a multi-axis 3D printing system as materials can be accumulated along dynamically varied directions. In this paper, we present a new computational framework to generate specially designed layers and toolpaths of multi-axis 3D printing for strengthening a model by...
journal article 2020
document
Fang, Bin (author), Ning, Fulong (author), Ou, Wenjia (author), Wang, Dongdong (author), Zhang, Zhun (author), Yu, Yanjiang (author), Lu, Hongfeng (author), Wu, Jianyang (author), Vlugt, T.J.H. (author)
Knowledge on the kinetics of gas hydrate dissociation in microporous sediments is very important for developing safe and efficient approaches to gas recovery from natural gas hydrate (NGH) deposits. Herein, molecular dynamics (MD) simulations are used to study the dissociation kinetics in microporous sediments. The hydrate phase occupies a...
journal article 2019
document
Zhao, Yuan (author), Alderliesten, R.C. (author), Wu, Zengwen (author), Zhou, Zhengong (author), Fang, Guodong (author), Zhang, Jiazhen (author), Benedictus, R. (author)
Finite-width-correction factors (FWCF) are required for GLARE to accurately predict fatigue crack growth using linear elastic fracture mechanics. As demonstrated in earlier work, these factors effectively correct for the change in specimen compliance, which in GLARE relates to intact fibre layers and the formation of delaminations between...
journal article 2019
document
Zhao, Y. (author), Alderliesten, R.C. (author), Zhou, Zhengong (author), Fang, Guodong (author), Zhang, Jiazhen (author), Benedictus, R. (author)
In general, a finite width correction to stress intensity factor (SIF) is required in the fatigue crack growth. The finite width correction factor can be explained physically from the energy point of view. It is assumed that the finite width correction factor primarily constitutes an energy correction factor, i.e. it corrects the applied load...
journal article 2018
document
Fang, W. (author), Zhang, Panyue (author), Zhang, X. (author), Zhu, X. (author), van Lier, J.B. (author), Spanjers, H. (author)
Anaerobic digestion has been widely applied throughout the world for lignocellulosic biomass treatment and energy recovery. However, the solid digestate from anaerobic digestion still contains a rather large fraction of poorly anaerobic degradable lignocellulosic fibers due to inhibition of lignin, which deeply limits the bioenergy production...
journal article 2018
document
Zhang, Xiang Yu (author), Fang, Gang (author), Xing, Lei Lei (author), Liu, Wei (author), Zhou, J. (author)
Functionally graded scaffold (FGS) is designed to mimic the morphology, mechanical and biological properties of natural bone closely. Porosity variation strategy between different regions in FGS plays a crucial role in influencing its mechanical and biological performance. A combination of modeling tool and scripting language can effectively...
journal article 2018
document
Cao, Pinqiang (author), Wu, Jianyang (author), Zhang, Zhisen (author), Fang, Bin (author), Peng, Li (author), Li, Tianshu (author), Vlugt, T.J.H. (author), Ning, Fulong (author)
A sound knowledge of fundamental mechanical properties of water ice is of crucial importance to address a wide range of applications in earth science, engineering, as well as ice sculpture and winter sports, such as ice skating, ice fishing, ice climbing, bobsleighs, and so on. Here, we report large-scale molecular dynamics (MD) simulations...
journal article 2018
document
Zhang, X.Y. (author), Fang, G (author), Zhou, J. (author)
Additive manufacturing (AM), nowadays commonly known as 3D printing, is a revolutionary materials processing technology, particularly suitable for the production of low-volume parts with high shape complexities and often with multiple functions. As such, it holds great promise for the fabrication of patient-specific implants. In recent years,...
journal article 2017
Searched for: +
(1 - 20 of 24)

Pages